Samsung series 5 ultra touch screen tactile intermittent problems

Similar Questions

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• Touchpad gestures works do not on Samsung series 5 Ultra

  A few months, I bought my laptop and gestures multitouch touchpad worked just fine (scroll, zoom, etc.), but after one of the windows updates, they no longer work. Someone knows why?

  PS. I am running Windows 7

  Hi Zheel,

  First of all that I would say to go to Windows update history and check the obtained updates recently installed. Read the following article to know how to check it and let us know the number of KB updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I suggest you to update the touchpad drivers and check. Check out the following link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I suggest you to download and install the software updates available for the computer. It will install all the drivers updated on the computer. Here is the link for your reference. You'll find it under more downloads in the following link.

  http://www.Samsung.com/UK/support/model/NP540U3C-A01UK-downloads

  You can refer to the section [448891] Smart PC: my touch screen is abnormal behaviour and locks up for a few seconds, what can I do? of the following article for more information on the update of the driver.

  http://www.Samsung.com/UK/support/model/NP540U3C-A02UK-troubleshooting

  Reference:

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates

  Let us know the State of the question, so that we can help you.

• Win 8 on samsung ativ smart pc - touch screen problem

  Hi all

  all of a sudden, my touch screen doesn't work - or better that partially - working: I use the s pen with no problems and even at boot I always type my password using the key, but once I'm connected, it no longer works.

  facts: I always say / connected the keyboard as requested only when the tablet was turned off. I've updated to last 8 version latetly victory (I didn't work before or after)

  someone can help me or has had the same problem?

  many greetings

  Nilli

  Hey there,

  Thanks for all the tips and tricks - in the end I discovered on my own:

  It seems that there are two kinds of adjustment: the windows ones like the Samsung ones. Not like WiFi, where they are connected and power applications light / each other, those for touch are not.

  I accidentally turned off the touch in settings of Samsung (which were hidden in single applications, not visible at first glance that I have disabled the 'Samsung Quick Starter') and I only checked the windows ones, which were very good.

  But maybe it helps other people!

  See you soon

  Lisa

• 9800 torch Touch Screen and Trackpad problem

  Our application adds buttons only on devices that support the touch screen.

  The reason why we do this is because if you have a selected item in a list field and press the getSelectedIndex returns the correct index on a touchscreen.

  Add this button on a trackpad/trackball device would not work properly because you can't the selected list box item and then click the button. You need to scroll this button first, the getSelectedIndex in this case would be the first clue or the last index according to the place where the button.

  If anyone has a solution or suggestions please post. I'll also post updates and a solution if I find one.

  We had the same problem when we added a toolbar style touch the foot of some screens that contains a list field.

  Our solution: vertical movement of pointer changes the selection of the list, while the horizontal movement jumps down to the toolbar, but leave the current selection in the list where it is.

  May not work for your particular application, but seems to be accepted in our.

• How can I get my password reset to work on my Samsung series 5 ultra portable?

  my password to open my cell phone did not work. I went to the site to reset the accounts you are prompted. I changed my password, but it doesn't always work. I can access the microsoft Web site from a different computer with the password, but not on my laptop.

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• the home of Windows 7 Desktop with touch screen and the problem is "not authentic."

  I have a windows 7, but lately its been said that is not true and that I have a counterfeit. A person or an HP agent will be able to help me or guide me in this process of solving this problem?

  According to Microsoft, Windows activation is valid during the initial Setup.  If you change the device, it can falter, because it will do a periodic test.

  (1) if I have activated Windows, why is Windows on my computer not authentic?

  Genuine Windows is a recurring process that checks your product key to ensure that it is used with the material, he has been associated during activation. If the product key appears as not authentic or not valid, it is likely that the product key is used on another computer or is a counterfeit.

  (2) I need to activate Windows after making a hardware change?

  Perhaps. When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

• Touch screen with L5006tm problems

  I lo0aded the drivers on all com ports 3, I even they loaded as a USB and I can not yet hit the target when trying to calibrate. What's wrong???

  I found the problem. HP messed up once more. They sent the W O R N G 2nd cable. I was wondering why they sent a telegram which cannot connect so that never to the computer or monitor. Thanks anyway. Oh, HP should put in the inistructions 2 cables are required, including one on the right.

• Portege M750/10J - touch screen problem

  All,

  I have the Tablet above and the touch screen works intermittently,

  The used stylus is that magnetic with the right click feature

  Someone at - it met similar problems?

  Kind regards

  Have you installed the latest version of the BIOS?

  If the latest BIOS does not help, there may be a loose connection, or the system needs an update. An ASP can do for you.

• 23_d160qd: ENVY23 loss of Touch Screen after restoring to factory settings

  I was forced to restore the system to factory settings after more than 2 hours with HP TECH. He left with the problem of origin of the loss of the keyboard and the mouse. He cleaned my system to the point wheer it wouldn't start. Touch screen worked before the restoration. He also had the problem of mouse and keyboard solved.  I can't find any setting that allows you to turn the touch screen.

  Problem solved. After the restart attempt did not work tried l a stop then power up and problem was gone and touchscreen has been authorized.

• How to apply the touch screen for Samsung SyncMaster 204BM

  Original title: Samsung SyncMaster 204BM

  I want to apply the touch screen and the narrative and I want to know if this screen and Iam from the computer using portable

  Thank you

  Nora

  Hello

  I suggest that you contact the manufacturer for information links to the product:

  http://www.Samsung.com/us/support/

  I suggest that you check the manual of the monitor to check if it supports the touch screen feature.

• touch screen has stopped working Samsung ativ 500 t, perhaps after upgrade to pro

  I have Samsung ativ pc 500 t. IT has been bundled with Windows 8 and worked perfectly. Last Thursday I have upgraded to Windows 8 Pro and a few hours later, on Friday he lost touch ability partially. Can I use the stylus (pen s), but I can't use the fingers. I have attached the device info on trh device I think should be linked to the touch screen with your fingers.

  Any help would be much appreciated. Thank you, David

  List of devices
  Created using DevManView

  Device Name	Manufacturer	Service	Code of Type of device	Name of Type of the device	Device ID of Instance	Location	Capacity of	Config flags	Disabled	Connected	Peripheral register 1 time	Device register time 2	The drive letter	Driver description	Driver version	.inf File	.inf Section	Driver Date	Record of pilot time
  HID-compliant device	(Standard system devices)		HIDClass		HID\ATML1000 & Col01\4 & 2101be6d & 0 & 0000		0x000000e0	0x00000000	NO.	NO.	13 12. 2012 0:33:49	13 12. 2012 0:33:49		HID-compliant device	6.2.9200.16461	Input.inf	HID_Raw_Inst.NT	21 6. 2006	26 1. 2013 11:34:33

  Hello

  I use Samsung ATIV XE700T and win 8.
  Happens to me too after I uninstalled the current Wacom driver (7.1.0 - 8-Win8) then install (7.0.9 - 5 - Win 7).
  Then why I have installed Win 7 driver if I win 8 as an operating system?
  Well, my pen was not working on Adobe Flash Professional (worked nowhere else). So after that I installed the Win 7 driver it started working on perfect Flash too.
  I don't know if you've already discovered but if you plug a usb device, finger touch works for awhile, then again stops working. And the same thing happens when you plug the device you plugged in.
  As I am an Illustrator with the stylus on the Flash for drawing is a priority for me so I did re-install the driver for Win8 again.
  Solution:
  
  
  1. go to "Control Panel-> programs" and uninstall the driver current (ISD Tablet).
  2. restart your computer.
  3. download and install this driver.
  4 restart your computer.
  
  
  You're done!
  Kind regards
  Kemal KAYA

• Lenovo C320 - touch screen does not

  Hello

  I just bought a new essential Lenovo AIO C320 series last week.

  And since the first day, I was not able to use the touch screen feature.

  The driver is installed but when I touch the screen it does not record anything.

  I get the calibration screen also but no tactile response.

  Ask your help for the same thing.

  Thanks in advance

  
  

• 3 1030 black - no touch screen after winning 10 Clean only install

  Hello

  After updating my 3 black Win 8.1 to win 10, I did a clean install to win 10 birthday updated using the tool of media.

  Now, the touch screen no longer works. Everything looks fine in Device Manager, but some devices are past next (screen tactile and audio).

  I guess there's a few missing drivers, but how do I know exactly which ones that the device is still not listed under Device Manager?

  Thanks in advance for your help. The Tablet is still under warranty.

  Best

  Christoph

  Download all the drivers for
  http://support.lenovo.com/ch/fr/products/Tablets/Miix-Series/Miix-3-1030-Tablet-Lenovo?tabName=Downl... and software | Drivers and software
  before you begin. Install the Baytray driver immediately after that the installation of Win 10 and everything works fine.
  :-)

• Apple Watch with broken touch screen

  Hello, community.

  I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
  On 7 September, Apple announced a new series of Apple Watch 2.

  Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

  Hello

  Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

  For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  Prices for the United States information service, for example, are available here:

  • https://support.Apple.com/watch/repair/service/pricing