SanDisk Fuze has a problem (cannot recognize on computer, can not load)

If you can not load, it's a fault of connecting cable, connector of the rocket or the USB port on your computer.

Tags: SanDisk Sansa

Similar Questions

  • My friend has a problem with its keyboard, she can not get the sign on its esprimo Fujitsue @ laptop can't get the @ so she is unable to do any e mails etc it runs windows 7

    I hope that you can help us!

    What do you get when you press this key?

    This looks like a possible keyboard mapping/region setting. See for the basic idea and make sure that its correctly.

    Or if you press 2 it appears that?

  • Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

    Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

    Please see:

    Re: adobe photoshop cc 2014 has stopped working in windows 8

    Re: Photoshop CC 2015 has stopped working

    I hope this helps.


    Megha Rawat

  • Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

    Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on the site has encountered a problem and cannot display the page you are trying to view.

    Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

    You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

  • Cannot reformat, says Pavilion «can not find hard disk Drive»

    I want to reformat the laptop HP Pavilion dv6000 my grandson. When I try, it loads Windows xp, but then says it cannot find the hard drive.

    The laptop is to some extent functional, but displays several error messages auch as "one or more files are corrupted" and "some partitions damaged."
    The unit offers to try to fix the problem, but fails.
    In addition, the "Start Menu" from the programs list does not appear, it says 'empty' when I click on "All programs" in the Start Menu.
    In addition, no icons appear in the "Start Menu", but "My Documents, my pictures, my computer, etc. are all here.
    By clicking My Documents, nothing is displayed. ------, but the computer responds and shows the 'disc C' and available memory, etc..

    What I would like to do if possible is:

    1 as the player works to a degree, try to get the GET disk xp, program that recognize so I can reformat.
    2 celebrate!

    Would be more happy of all assistance. Thank you.

    The laptop is running. And we are justified. I just talked to the man who has done the work to local ghe Geek Squad. He proceeded as follows:

    1 update the Windows operating system (OS to nu xxp) to service pack 3 using available cds which I did have.
    2 went to another computer and downloaded the drivers HP form.
    3 installed the drivers and it went online as a champion.

    Apparently the version of xp was so old that the drivers, I downloaded from HP on another computer and burn it to a cd, simply move in the laptop.

    So, no way we could proceed without saving this service 1 one 3 discs. I had actually tried to download these service packs, but all I could get was service pack 1a .who might also do not install.

    Thanks again. you were right on target, but I couldn't do it.

  • Dreamwever cs5.5 cannot save or stick translators not loaded due to errors

    Yesterday, everything was fine. No change, no new installs what it is.  I have Windows7 64, DW CS5.5.  All of a sudden today many things is falling apart: cannot open a html page and register a sub - is no longer an option. Cannot copy then paste into a page - even simple HTML.  Must use the "Paste special" option  Biggest problem is each page I opened, even after installing the latest updates, reboot and the soft opening DW is this new popup alert: the following translators were not loaded due to errors: ColdFusion.htm: invalid configuration information tha tis a.  Date.htm: has configuration information that is invalid.  Spry.htm: has configuration information that is invalid.

    Because it worked yesterday, the common solution I see is the old, uninstall and reinstall.  If this is the same disk, etc. Why that would help me?  Can someone point me to a more logical solution without blame code or anythign else?  I tried to create the easiest page in html with nothing between the head or the body - get always the same error.

    Thank you.


  • Startup problem; XP continuously restarts. Can not read files

    I have a problem starting with a computer that running Windows XP SP1a upgrade to SP3. It belongs to another Member of my family, which has switched off the power when a BOUNCING mouse problem has prevented the normal shutdown procedure.  At startup, it shows the screen boot options that if I choose "Safe Mode" or "Start Windows normally" it loads normally to the point where it shows the screen of flying windows for a while, becomes empty briefly, then restarts.

    I tried to leave, he in Repair Mode using the Windows Setup disc in the hope to repair the startup files, but have problems to read the files on the C; drive. If I try to look at the records, or change to a different folder, I get the error messages like "invalid drive specification" or "an error occurred during directory enumeration" I guess that's because the XP SP1a installation disc which I use can not handle the 80 GB hard drive and the NTFS file format.

    Is it possible I can get access to the boot files


    I solved the problem

    After the announcement of this question, I ran CHKDSK from the repair mode and it corrects an error in the file system, and I was able to start Windows.  As a precaution, I have since set a system restore to a few days point more earlier than when the problem occurred, and all goes well now.


  • HP 6500 has more than 4 in 1 machine can not scan wireless in Vista

    I can not scan from my HP 6500 a Plus 4 in 1 machine to my computer wireless wireless running Vista Home premium (64-bit). HP technical support says that the problem is with the function of WIA scan on my computer. Any help would be appreciated

    * original title - can 't scan from my HP 6500 wireless has more than 4 in 1 machine. According to HP, the problem is with the function of WIA scan on computer (Windows Vista). Any information would be appreciated *.


    Uninstall and reinstall the HP scan utility and check if this solves the problem.

    You can download it from this link:

  • I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

    I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

    Hello, Dorian,

    If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

    If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

    Let me know if this solves the problem for you.

    Kind regards


  • I just bought a game wing to viet nam and it installed and updated but when I go there to play I get the message cannot find d3dx9_31.ddl can not open application how to fix this?

    you have a tool I can down load for a problem of d3dx9_31.ddl?

    Hello Vernon Cook.

    Simple solution, download the latest DirectX runtime Installer.

    Hope that helps. :-)

    Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at and Please post back to let us know what works and what does not. :-)

  • DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

    I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

    Hey @gingerjean1,

    Welcome to the HP forums! I hope you enjoy your stay here.

    I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

    As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

    Apple Software Update

    1. Click on your Apple icon and go to software updates.
    2. Install the available updates.
    3. Apple's HP printer driversdownload.

    If during the installation there is no wireless options then:

    1. Go to your Apple system and print and Scan preferences icon.
    2. Double-click your printer icon on the left side of this screen.
    3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
    4. In this new window, you must have a wireless tab along the top, that you can click.
    5. On the left side, we are looking for a wireless configuration wizard.
    6. Run the Wireless Setup Wizard to add the printer to your wireless network.
    7. Once the printer is connected, disconnect the USB cable to the back of the printer.
    8. Return to the Apple, system, print, and Scan preferences.
    9. Click on the button "+" at the bottom left.
    10. In this window, select your printer.
    11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
    12. Click on Add.
    13. Try to print.


    If the method above does not allow you to connect the printer wireless, then it can work.

    1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
    2. Turn on the printer.
    3. Press the button on the front of the printer wireless.
    4. Wait for about a minute.
    5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
    6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
    7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
    8. You should have a network tab along the top of this window.
    9. On the left side, we are looking for a wireless configuration wizard.
    10. When you run that must connect the printer to your wireless network.
    11. Once the printer is connected, disconnect the USB cable to the back of the printer.
    12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
    13. Return to the Apple, system, print, and Scan preferences.
    14. Click on the button "+" at the bottom left.
    15. In this window, select your printer.
    16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
    17. Click on Add.
    18. Try to print.

    If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

    I hope this helps and I hope you have a nice day!

  • IAM has a problem with the update it will not install code646 KB977839. I tried to install it several times and it still will not be installed. It keeps telling me to try again.

    I have tried everything what iwas instructed aet again this update will not start I get error code646

    Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

    Tip: If no joy, see if you can download the "fullfile" of the update and then install it manually =>

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • All of a sudden my computer can not recognize my dvd rom; It's a laptop, so I can't disconnect it and reattach. All ideas, software is there, but just not material rec.

    I have a gateway laptop with xp.  All of a sudden it won't recognize my hardware dvd player only.  Software is there but it says that there is no material.  Cannot take part in check but it should be good.  Hear, he starts to run, but his similar windows do not.  Help!


    1. have you done any change in software on the computer lately?
    2 have you installed any third-party CD/DVD burning software?

    Method 1:
    CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

    Method 2:
    To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
    Your CD or DVD drive cannot read or write media

    See also:

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 ( how to back up and restore the registry in Windows

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Method 3:
    The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    I hope this helps.

  • replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

    After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

    Can I get a support phone number to get this problem resolved?

    Here's how to contact HP technical support: (click on printers & monitors, there is a phone number on the resulting page).

  • Windows 7 installation problem - I can not load the disc of windows 7 for

    I can't get windows disk to load 7. I am trying to run the full version on top of XP.
    When I open my computer, always open the D drive then its empty. Any ideas?

    ETA, I try to install the 32 bit one

    I have an answer!

    At least, it worked for me tonight, and I pray it works out for others in this situation.

    I got exactly the same problem as you, except that I wanted to replace Vista with a clean install of Windows 7 on a computer of the 32-bit system IE.  But, like you, it just has not been grateful that there is a disc in there after that many 'click' would say tell me to insert a disc or that there was a disk failure.  I have since bought nine from a retailer, and was not very impressed and nor am I impressed by the response from Microsoft about this problem and must send them a letter expressing my displeasure.  Issues such as this must be properly studied and perhaps added to the 'specifications' of the software to warn buyers to potential problems of certain brands or models of PC.  In my opinion be told to get off the USB drive with a process that most of the audience would find almost impossible to understand and follow and with the many added costs of having to buy a portable hard drive, large enough DVD or USB drive is unacceptable, as far as Windows 7 is not an item to purchase low price as it is.

    In any case, this is what worked for me.

    I came to the conclusion that I wasn't going to lose more than £100 and so I have to use a laptop hard drive in order to make the suggested drive of USB and copy the disc on the laptop hard drive.

    I went into 'my computer', inserted the disc and he started his stupid clicking on and was not recognized, but in the list readers on the left side, I dragged all drive "E" (which is my DVD player and where the disc of Windows 7 was) on the USB hard drive.  This does not seem to have an effect, so I click with the right button on the E drive and press "copy" and "Paste" on the USB hard drive.  Now, I'm not sure if there is just a delay between the first process or if it was this process that has worked (as a result, please try both), but suddenly it seemed to 'wake up' the disc and it was recognized instantly and "run setup.exe" appeared in a pop-up and I could finally install Windows 7!  (Please Note - Although the disc began to copy it to the USB, I could have cancelled at any time so didn't need actually portable hard drive for this process - it just seems to 'wake up' when I tried to copy it somewhere else).

    I really hope it works for all those stuck with this problem and would like to hear if it has.

    Another point to note is that during installation, the computer will restart several times, and each time restarted mine, it got stuck on the screen black 'boot from CD' (due to the computer not recognize drive).  It was, fortunately, easy to solved for me to eject the disc and then close it again (leaving the disc, of course).  The rest of the installation was fine.

    Please, please post on here if the works above for one of you who have problems.  I sincerely hope that it is.

Maybe you are looking for

  • Designjet t120: t120 err b87e1f54 designjet hp

    He plotter not da più any risposta e sul display device the error in oggetto, volte più spenta e riaccesa, room scollegata dalla corrente e dal pc by diverso tempo nessun change... posso fare qualcosa o comunico al client che e da buttare?

  • Family Safety Windows blocking is not enough

    I have activated Windows parental controls for a child account on Windows 8.1 and disabled all applications that are registered except Chrome. I tested and it blocks a lot of things, but allows much more than just Chrome. I disabled the downloads in

  • Problems connecting WAG54G2

    This morning I found that I was unable to connect to the internet using my unit. As I have a NAS connected to what I can connect to who prevailed on the problems on my home network. I checked the State and found that everything was ok as were actuall

  • Reconfigure existing disk on MD3220i groups

    Hello I currently have a MD3220i with two disk RAID 10 groups. I would like to reconfigure them in a large RAID5. These are used by a Hyper-V Cluster Server 2012 running. What would be the proper way to remove the volumes of the beam, removing the ex

  • Creating UI with sample C++ error

    Hello everyone, I'm learn stunts and following the creation of your first sample app. When you reach this code: bool result = connect(opacitySlide