SanDisk Mobile Ultra 64 GB write protection error

Similar Questions

• Recovery USB key comes with write protection error when starting at the beginning of recovery

  I just got my key USB recovery flash in the mail from HP.  I have an ENVY 15 t-j100 Quad and I had accidentally wiped the OS off the coast of the SSHD.  I go into the BIOS, change the boot order, even tried disabling and enabling legacy mode secure boot and I get the same error once I have tell the laptop to boot with the USB key.  He comes up with an error cscript.exe and says that it is impossible to write in the C: disk because it is write protected.  I can cancel, try again or continue, but the laptop stops just after these buttons.

  Any help would be appreciated.  Thank you.

  Ryan

  I had set up the SSHD acceleration and 24 GB cache in a RAID0 configuration, as if it was before I wiped the OS.  Apparently, which caused the error, because recovery what USB works fine once I reset both drives non-RAID configurations.  I'll be able to put back them in a RAID0 once the OS is installed?

• Flashdrive USB 3.0 write protection error?

  Good, then, one a few months ago I bought a new flash drive, a flashdrive Lexar 3.0 with 32 GBs. yesterday, I was copying a file to my flash drive, then he stopped at halfway with an error message. The error message:
  

  I started to get a little scared, so, as usual, I looked online for help. Apparently, other people have had the same problem. I tried all methods I thought to use the command prompt to change the Windows registry. Yet, none of them worked again! My last choice was to format the flash drive. Then, I started trying to format it. Then, a familiar message box popped up: "the disk is write protected". (As seen above). I was confused; Why my flashdrive write protected? I looked everywhere for some kind of help. I couldn't find anything.

  Other notes:
  -L' error does not come from my PC. I tried to use my sister's cell phone to get in shape, and he gave me the same error message.
  -My flash drive is not a write protection option. (It could, but I could not be aware of it).
  -J' tried various other programs to try to format.
  -There is no virus on my PC or a flash drive.
  -There are about 20 GB on the flash drive, so it is not complete.

  -J' already tried using the registry.

  I hope someone can help me, because I really don't want not to waste my money on another flash drive that will just give me the same error.

  Thank you once again!

  What follows is the best source of info that I found for USB thumbdrive problems:

  <>http://www.Uwe-Sieber.de/usbtrouble_e.html >

  USB stick seems to be write-protected:

  1.
  Check if the USB has a little swich for write protection.

  2.
  Windows can write protect USB drives too. Check out the registry under
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.
  The value 'WriteProtect' should be absent or set to '0'.

  3.
  Flash memory has a limited lifetime of about 100000 guaranteed write cycles. Most flash life much longer cells, but the cells that become defective must be replaced by reserve cells (defective block management). The flash controller handles this in the background. When all reserve cells are consumed, then the flash controller refuses all the write access. Then you can read your data and put the unit to recycling.
  This can happen even the drive was never even almost completely filled because the flash controller spread access write on all physical blocks to make sure that all cells are worn (wear levelling) equally.
  Unfortunately, USB flash drives have no standard mechanism to read their current state of health, as in hard disks. Therefore, always expect a USB flash drive to die at any time...

  HTH,

  JW

• When I try to burn a DVD I get a write protected error message

  Original title: burning dvd, s

  I'm trying to burn pictures on dvd and whenever I try different models, it happens always protected write what is and how do I get rid of it please.

  Hello

  Burning a CD
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Disc burning tips
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Format a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVD

  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  ----------------------------------

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Write Protection

  How to remove 'write protection' from a SD card?

  In general it is a switch small cursor on the map.  However, sometimes a damaged card will give a "write protect" error, which really means that the card is no longer usable.

  writing in the new message: * e-mail address is removed from the privacy... *

  How to remove 'write protection' from a SD card?

• Fix the Flashdisk write protected

  Please, how do I fix my Kingston D101, 8 GB (= 0011 VID, PID = 7788), it is necessary to format but protected write (before he write protected my flashdisk was attacked by one / or several viruses and I clean it with antivirus SMADAV.) I don't know what is the virus but its been a lot of strange folder)? I try Fc Mptool but I don't understand how to use it. Thank you. Sorry bad English.

  Hello

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it. Write protection is an element of protection which prevents accidental deletion of important data.

  If you want to remove protection, try the advice given:

  Method 1:
  I suggest you to follow the steps and check if the problem persists.

  a. open 'My computer'.

  b. right-click on the USB key and select'Properties'.

  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the option appears saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.

  e. try to delete the files.

  Method 2: I also suggest you follow the steps to edit the registry to disable the write-protected error and check if the problem persists.

  You can remove your usb pendrive write protection using the method below:
  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open theRegistry Editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. in the right window, double-click the registration key and set the value to 0 in the value
  Data area , and then press theOK button
  d. restart your computer and try todeletefiles from USB flash drives.
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  For more information about how to back up and restore the registry, proceed as in the article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps.

• Write protected problem

  I have a 8 GB USB Flash Drive from Microsoft Support so that I could (with assistance here) reinstall Windows 8.  The installation went well and now I want to use the Flash drive for other purposes.  Whenever I try to reformat the hard disk, I get the error message "... write protected '. "How can I change the status of the flash drive write protected?

  Dell XPS 8500 Special Edition, Windows 8, IE 10, connected to a hub Flash drive powered 4-port.

  Thank you.

  Hi NurdBurd,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the flash player that you are getting an error message "Write-Protected". I'll be happy to help you with this problem.

  -Did you do changes on the computer before this problem?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it. Write protection is an element of protection which prevents accidental deletion of important data.

  If you want to remove protection, try the advice given:

  Method 1:
  I suggest you to follow the steps and check if the problem persists.

  a. open 'My computer'.

  b. right-click on the USB key and select'Properties'.

  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the option appears saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.

  e. try to delete the files.

  Method 2: I also suggest you follow the steps to edit the registry to disable the write-protected error and check if the problem persists.

  You can remove your usb pendrive write protection using the method below:
  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open theRegistry Editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. in the right window, double-click the registration key and set the value to 0 in the value
  Data area , and then press theOK button
  d. restart your computer and try todelete files from USB flash drives.
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  For more information about how to back up and restore the registry, proceed as in the article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  If you need help with this question or any other worm protection related issues, keep us informed. We will be happy to help you

• I bought a SANDISK CRUSER it IS GIVING MESSAGE THAT THE DRIVE IS BEING WRITE PROTECTED.

  I bought a sandisk cruzer made 16 gb USB stick (black & red). Flipkart online store I bought March 28, 2013.

  After three months, it was an error message "the drive is write protected another device to copy use." I am receving this message when I try to copy something into my USB.

  So I asked these people to kart flip, they said that they warranty replacement for a single month. but this problem started after three months I bought it. and then sent to the people of sandisk also took all the necessary information about this.

  But still its giving the same message now what should I do to get my USB drive replaced.

  Please give me the answer as soon as possible

  My details:

  Annie Gnanender

  No. mobile-9032340234 / 7406717735

  e-mail [email protected]

  Please contact me as soon as possible

  Contact SanDisk directly using details here:

  http://www.SanDisk.com/about-SanDisk/contact-us/

  No one will call or e-mail by (or SanDisk) and it's a very, VERY bad idea to post your e-mail address and/or telephone on a public forum.

  I suggest that you click on Options (at the top right of your message) and edit your post to remove this personal information.

• error disc is write protected. How to overcome?

  When I try to copy files from one hard drive to another in an environment lan its shows disk error is write protected. How to overcome?

  Make sure that the account that you use to have full access (read/write) on this disc

• Fax and Scan Error - Message could not be sent. Media is write protected

  I have a PC with Windows Vista Ultimate on it.  Turns off user access control.  On the sign as Admin will have all the rights.

  Windows Fax and Scan works very well for a long time.  Had a modem comes to shove, he replaced everything works fine.

  In the last day or two - with no known changes to the system - the system is no longer send and receive faxes.

  It gives me an error-"message could not be sent.  the media is write protected. »

  This happens if I try to send a fax directly from the Windows fax software or if I try to "print" a document by fax.

  When you receive a fax - it gives a similar error.

  It works as records receive faxes are unalterable and, if I look at their properties in Explorer.  I try to uncheck Read-only and it acts like it works only when I get back - read-only is still selected.

  Other times I tried to make changes to access to the files by Windows Fax, fax settings - but it tells me that I have to be logged on as administrator to make these changes and I signed up as an administrator - the only Director on the PC.

  I also removed the Fax profile and recreated.  I think that the question is the property read-only on my directory of fax, but for some reason that seems locked on.

  I also shot the back, rebooted, turned off UAC back, rebooted and tried to change the settings of RO, no luck.

  Any ideas or suggestions would be greatly appreciated.

  Thank you!

  Read-only for folders is normal (mine are).  See if this fix works for you:

  Fax Error: The message could not be sent. Media is write protected

  If the registry change is useful, please let us know.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move

• When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected

  When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected. How can I solve this problem? Thank you for your time, Shawn

  You may not have the correct permissions or own the medium on which you try to perform the backup.  Here are some instructions on how to give you the right permissions and Take Ownership (if necessary).

  To view your permissions, right-click on the file/folder/drive, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/. In this csse make sure grant you full permissions and check also advanced special permissions (including the inherited permissions) which can substitute for this entry to limit your rights by assembling as well.

  To resolve this problem with folders or drive, take possession of the records or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to cancel on sandisk USB write protect

  How to remove write protect on my thimb drive - sandisk cruzer flash drive switch?

  Hello

  You can remove the SanDisk write Protection by following the steps:
  a. open 'my computer '.

  b. right-click on the drive letter of your flash (usually F: / or G: /) and select "Properties".

  c. click the tab sharing to make it active.

  d. click on 'permissions '.

  e. check the box 'Allow' next to 'total control '.

  If the problem persists while you can contact sandisk for better support.

  Contact us
  
  http://SanDisk.com/about-SanDisk/contact-us?utm_source=contactus&utm_medium=hyperlink&utm_campaign=HomePageTracking

• BitLocker error "failure of restoration of a conversion completed abruptly BitLocker Drive Encryption. "Can be either all newspapers of conversion being corrupt or the media is write protected."

  Original title: problems with BitLocker.

  "Hi, I enabled BitLocker on my external hard drive, plug into the system to access my files, it shows error ann response after I entered my password just a mistake:

  "BitLocker Drive encryption is not recover sharply completed conversion. "Can be either all newspapers of conversion being corrupt or the media is write protected."

  Please help me with a solution

  If this does not work... http://TechNet.Microsoft.com/en-us/library/ee523219(v=WS.10).aspx .. examine the contents of the drive and the drive itself lost forever.

  BitLocker is the Windows utility for free one that really mean, and it does EXACTLY what it says on the box, BUT if the disk on which it is enabled has a problem for SOME reason, the results are catastrophic.

• Spectrum of HP x 360 (Lake of set): error during the update of the Bios (c2-error: the region is write-protected)

  Just got the new spectrum x 360 with processor i7 to set Lake.  I love most everything on it, but it's hot in the upper left corner, and temperatures are in the order of 80-90 during a normal charge.  Research of solutions possible and a common solution seems to ensure that the Bios is updated.

  HP Wizard jumped by chance in a message on a Bios updated available.  Perfect timing, so I thought.  Update downloaded BIOS ok, but during the installation, I got the error c2-error message: region is write protected.

  Reflection on the update of the Bios?  I know that one of the recommendations is not not to date Bios at least that something does not work.  Everything seems to work fine, but I think I should update it Bios to see if it solves the problem of heat.  Thoughts on that?

  Thank you.

  Thank you.   It's the strangest thing.  Despite having the error message above and the Bios update process pretending stops, when I rebooted hours later, the Bios updated.  I checked, and it is now the latest version.

  Guess my problem is solved.