Sansa clip 4 GB fell in the toilet

Similar Questions

• IPhone 6 fell in the toilet. Best solution?

  My iphone 6 fell in the toilet (clean water) for a few seconds and I immediately turned off and shook the water from the bottom.  Its been in a bag zipper submerged in the dry rice and 1 package silica I had for 36 hours and then put a fan above for an hour and a half.  I turned on and it worked but slow to respond to my touch.  The screen flickered a little and I saw a shadow box dark in the corner of the screen.

  Any suggestions how I can get out any remaining moisture? Even if I don't get the moisture out, will my phone slowly deteriorate?

  Apart from what you've already done I did hear something different.  By-the-book of ASC response is bring it to an authorized repair center for evaluation.

• Sansa Clip - computer does not recognize the music file

  I have a Sansa Clip 8 GB. It works OK. It connects to my PC (Windows 7) and fees. But when I open the music from the PC folder there is nothing in it. There is the music of the clip and he is playing. But nothing in the folder on my PC. The clip has the firmware version: v02.01.35A. His car is up to date. Any ideas?

  Try changing the drive USB MSC mode by going to settings > system settings > USB. If you still don't see the files, try MTP mode. Files transferred in a mode are invisible to your PC when it is connected to the other mode (files transferred in both modes are still visible by the player himself, that's why they play even if the PC cannot find them). The third mode, "Automatic Detection", should be avoided because it can change between the MTP and MSC between sessions without warning, according to the whims of Windows.

• BlackBerry Smartphones Blackberry 9300 3 - fell in the toilet

  My phone slipped from my hand in the toilet.  I took it out very quickly but... you know the water has already obtained the parts.  I took out the battery and SIM all dried up.  Breath out with water and replace the sim card and the battery in the phone.  He began to charge the blackberry on the screen and hung up.  I took the new battery and sim and tried in my old phone and they both worked.  I put it in the phone all nothing on screen.  Yesterday I took it to AT & T and they said... Sorry $ 400 for a new... I sat out yesterday battery and sim outside in the Sun, hoping the heat would dry it out.  Put the battery and sim back in... still nothing.  Help!

  You have probably fried it by continuing to put the battery in and let her power.

  Most all BlackBerrys will work after getting wet, as long as you are patient and thorough.

  1 the battery immediately! Do not turn on your BlackBerry device.
  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)
  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).
  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Sansa Clip + 8 GB show all the music, play or delete on PC

  Yesterday, I plugged the drive to my pc to remove some songs and add some new ones. Everything was going well until I went to add a song that is on my computer for a long time. When I wanted to copy into the folder music from Sansa, he said that I couldn't copy it and then did my drive started to act up.

  Now when I load the folder music, I get a bunch of icons that look like the icon 'internal memory' before, it shows my music. But then it loads up to the letter T, and even then, it skips the letter S and shows only 3 songs of the letter T. It won't let me play anything out if the folder no more. If I click on any song in this folder to read it, I get the following error message...

  Can not play. Try playing something else. File format can be unspoorted, file extension may be incorrect or the file may be corrupt.

  I can't delete songs or even these icons because he told me that my drive is not connected. I tried changing the settings to MSC and MTP and it does not help. And neither the factory resets to zero. I think it's the * beep * windows media player. I think that it it screws to the top when he tries to synchronize my drive w / it.

  My player works fine in my car. I have a stereo that has the USB port, so I can connect my player up to it. No problem.

  I really don't want to reformat, but if I have too... No one knows why this happens? Is there a solution without reformatting?

  happenn wrote:

  I don't have us WMP to transfer songs, I do it manually. It's just that whenver I connect my player, WMP has to get involved. There certainly must be a setting where I can turn this function OFF

  Use the MSC Mode, not the PSG. It's what gets involved WMP.

  But, that being said... your computer cannot see files in 1 mode, at the same time, so after re - format switch the player in MSC mode (settings > system settings > USB Mode), then re - load your files on the drive. Otherwise, it can get really confusing. And do not use the Autodetect setting. Which defaults to MTP mode if it detects that WMP is on the system.

• Sansa clip lights, be recognized by the pc or the load?

  OK, I bought my mp3 player on the 2nd o this month and I went to put on today after just yesterday and it lights... so I try to load it and it does not recognize my pc. What makes it unable to load by the pc. I have a gigger in my usb charger Tremblay and which does not load... and he did. everything worked yesterday! im still waiting for an answer from sandisk about what to do now. I can't take back at the store since its past 15 days return policy! So im very irritated. everyone has ideas on how easy to get this supported by the guarantee or what was wrong with players out there that won't turn on. Thank you

  Same thing happened to me an hour ago. The documentation that accompanies the device says of "slide up and hold the button for 10 seconds.» Then turn on again. "Tried to him... and IT WORKED! I hope this helps.

• BlackBerry smartphones it fell in the toilet!

  Now you can get only light red when the prosecution then screen shows battery with lighting flash icon! If I lost my BB or can you help me please it would be appreciated

  Thanks Bill... I will be "bare" that in mind

• Sansa Clip + problems, correct the records but unknown marking and scrambled the tracks. Help!

  Hi guys,.

  There can someone please offer some advice for me and my husband before we became completely crazy?

  We bought for our daughter the Sansa Clip +, but we are having the same problem occur over and over again.

  During his music and audio books have first been loaded above all was fine. Added items displayed in the files and the right places but, now, for some reason when we add anything, the record of the album can be seen, but it also creates an additional folder that displayed as "Unknown". When you go and try to play inside this folder it does not work... "We always ensure that there is proper use of marking we MP" tag, so I know that the questions are not because of it.

  We have tried everything we can think of. Tried to update but I think we already have the latest version installed in any case - V01.02.18P, performed a factory reset, put in shape and I have tried using different modes, but it makes no sense. Why everything fine was a couple of days and not now...

  We use a 16 GB Kingston SDHC Card inside the Clip +.

  Please any ideas would be welcome because it becomes a nightmare.

  Thanks Claire x

  I should add that I am starting to think that I can have bought a card SD of FAKE writing is rubbing on the front of the card... IS this likely and if so could cause of the issues I am currently experiencing? XX

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• Sansa Clip 2 GB shows "Connected" when the charger is plugged

  I have a Sansa Clip 2 GB is around the age of 6 months.  He played very well for 5 months, but for the last month, he periodically left the game and shows 'Connected' when the charger is connected.  I can sometimes turn off and on and it will start working again.  He will play for awhile, sometimes minutes, sometimes a few days and then stop playing again and see the "connected".  When he is in this state it will load but not play.  I tried 3 different Chargers and all have the same problem later.  I updated the firmware of 01.01.32 but no help.

  Someone knows how to fix this?  TIA for any help.

  OK, here is the last, this problem is resolved, but he caused a new sorta related problem.  What I did I deleted all my files and just put all the songs in the Music"" folder.  This seems to have solved the problem where it says 'connected' and stop playing, however, now it plays a day or two and then stops himself.  I just press 'Play' and he starts going again, so it is not much more than an annoyance I can live with that, and I could see where maybe he could do so on purpose after she played all the songs, but why it not it that way when I got it?  He played continuously day and night for months as a first step.  I'm confused, but I can at least live with the Clip now.

• The Sansa Clip - button / stop

  I think I have a similar problem to most of the people on this site, I have a sansa clip (2 GB) blue and the other day, that the girlfriend was listening, however, it turned off as usual but nevertheless I wanted to use it the next day, when I came to try to turn it on, but it would not accept.

  I tried all the options about resetting it, and also I have updated the firmware version I could access using the WEDGE + middle button Option while only connected via a USB cable. However, now that ive done it, im able to see the sansa clip as an element connected on the list 'my computer '. Everything I've had there been deleted. Then back to the factory settings.

  However when I have the camera connected to the computer and I'm going to turn off while its still connected, I can, and when I go to turn it back on again, it turns on.

  Its when I have the device disconnected from the computer and try the power button, it will not only she won't turn on and I thought it might be something to with me a fall, which, if I did, I don't remember because I the care normally in a safe place as I consider that my MP3 as my baby... lol.

  Anyway, hope you guys have a few suggestions that I'm totally distraught...

  Please get back to me as soon as POSSIBLE

  Thank you

  Concerning

  David

  Have you read the other threads on the same topic? If you are unable to turn on, you may need to get another, exchanging where you bought it, or have it replaced by SanDisk warranty.

  Insofar as all your music being gone, I doubt it. More likely is that in your update of the firmware, your device default to opposite USB mode you used to put the music on with. If you put the music in MSC mode, it does not display in MTP mode and vice versa. It is still there, but your computer only 'see' in the mode he was transferred in.

• Sansa clip-drag & drop shockwave object corrupts - the error of the operating system "refreshing database".

  If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»

  It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.

  Help!

  André

  Try the clip board.  This is the map of the e200 series.

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

  Sansa Clip + 4 GB

  MTP mode

  MicroSDHC 32GB

  Windows 7 64 - bit Winamp (no additional plugins)

  I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

  But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

  

  Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

  If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

  Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

  Thanks for any help.