Sansa clip froze screen message says "disconnected".
My machine went on mode standby mode when it is connected with the Sansa clip. I grew up my machine and unplugged the USB Sansa, since then clip shows a message "disconnected." Even if I'm trying out or other options it still shows offline message. I tried the firmware update, but it says that no product can be updated sansa is recognized.
I hate it when this happens. The Sansa off, slide the switch to the position IT and hold it there for 10-15 seconds. This will be a soft reset of the device.
It should now light up normally and will be recognized by the computer again.
You can prevent this catastrophe wee by configuring the USB to stay in standby mode. With the trendy Sansa, in Device Manager, go to Bus USB controllers, and expand that. You will see a list of ads from hub USB root at the bottom of the tree.
Starting at the bottom, click twice on each one and select Properties. The Sansa is hidden in this point of view, but it is be clicking on the current tab. When you have found the position of hub with the Sansa listed, click the power management tab, and uncheck "allow the computer to turn off this device to save power".
Please note that the Sansa Updater will modernize only the firmware currently installed the latest version, but it is not designed to reinstall the same version, as in the case of a repair. To reinstall the same version, you must follow the instructions to install the firmware manually.
In this particular case, I don't think it will damage your firmware. The soft reset should do the trick.
Bob
Tags: SanDisk Sansa
Similar Questions
-
What charge the Sansa Clip: after an hour, the screen turns white (a screen saver, I guess).
I would like to activate the screen saver immediately, to extend the duration of the display. Is it possible to do?
Or maybe in a version of firmware future, so a sequence button turn it on.
Unless the life of the screen is much longer than the lifetime of the unit in general...
Thanks for your time.
As far as I know, you can't do it manually now.
This is the reason why some people with an adapter for recharging: when charging via AC, the display shuts off after setting the time of the backlight of your display.
Indeed, even if it bugs some of us, it is likely that display time of 1 hour during USB charging will not significantly affect the ultimate lifecycle of the screen, in the end; If I remember correctly, the screen has a life expectancy of 5000 hours or something like that (sorry, it's been a while) - it is 208 days of fulltime show all day/night long. By the time you reach this point, probably, if ever, the battery life may have been reached, or you probably may have gone to another player, as technology improves over time. But it's all unique to each user (if you are more rare than the user who guard 8 hours per day, life of the screen display will be reached about 1.7 years; if you use your player lot every day and are charging every day, charging via AC could save you 365 hours of projection of the time per year (, the equivalent of almost a month of 1.7 years screen time), and so you can recharge via AC just to cover as much as possible. (More realistic, if your screen is on for 2 hours a day, which is still a lot, unless you really keep your screen on a lot, the screen should last for about 7 years or more - think where you will be and what technology you are using maybe at this time.)
-
Sansa clip cracked screen and need help turning repeat stop
My screen is cracked and I can not afford a new mp3. Unfortunately, it's the repeat mode 1 song when he cracked. I just need a procedure step by step to how to repeat offshore. I don't see any of my screen. I would also like to know how I could put it on playall instead of just a song mode. I tried to reset it but it doesn't work. I'll be away from my own computer for a few months, so I would rather not format because I lose my original songs that I have on this subject. I also have an audio book on it then a procedure step by step on access which will be useful also.
Hmmm I don't know how useful it will be: do you see anything on the screen?
My version of firmware on the clip is: 01.01.30a
Starting point: When I turn on my video it automatically starts playing my last song and obeys the shuffle / repeat options.
By pressing the menu key small I will be positioned on the music
Music (headphone icon) ... If I click the bottom , I get the following menus:
FM radio
Voice
Parameters
Music (back to music again)
If I click Select on the music , I get the following features:
Play all
artists
Albums
Songs
Kind
My best rated
Playlists
Podcasts
Audio books
records
Music options
Play at all (and back to play at all)
If I'm playing together and the song: each arrow pointing down will give you the following:
Back to the list of music
Add song to Golist
Rate song
Shuffle (stop / market)
Repeat (All, Off, song) *.
Music EQ
Clear Golist
Delete the song
Back to the list of music (then return to the list of music once again)
If in this menu, I click on the right arrow on repeat * for every time I press the right arrow key, I turn the 3 following options
All the
Off
Song
Allows you to start with the Clip off: so: If your clip is on... turn it off...
If your clip is now disabled, start by putting on:
then click on the small menu button
then click Select
then click Select again to play all the music
Wait a few seconds and the songs should begin to play. or if its on UN-pause pause, there click on place
To change the repeat function: while playing a song...
Click Select
click the bottom 5 times
then to change click on repeat right options will be all out, song and start over with all, off, again song. This will start with whatever the currently set option.
So if his game to repeat the song. click on the right change to repeat all, right click to change to repeat Off
Click Select = the middle button on wheel
Hope this helps, reply back if it did. and I'll look audio books, the next time or someone else could
-
Sansa Clip bottom screen SanDisk MP3 Zip
Picked up two Clips Zip for the kids for Christmas and every child has own music on CD, have also two high tower to synchronize each MP3 player separately. Two senior tour are running Windows XP and I use Windows Media Player to transfer/sync music. Has first girls Clip Zip with no hic - ups on laptop
#1 I thought.
Secondly, I started my son on laptop #2 and notice his Zip Clip showed the album cover photo in the display of the MP3 player as
back ground, my girls didn't do that. So I experimented with his MP3 player on laptop #2 and filled but ultimately it will not be back on the ground, on laptop #1. Is there something I've located on laptop #1? Is there a file missing from Windows Media Player it needs to perform this task?
Hi TMS1795,
I suggest you to see the steps in the manual.
http://mp3support.SanDisk.com/downloads/UM/clipzip-UM.PDF
If the problem persists, contact SANDISK support for more help and information.
For reference:
Synchronize your media files to a portable device
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/sync
-
Sansa Clip Zip battery does not charge, goes directly to the screen of the song
It's my third Sansa MP3 players. The first was a Sansa Fuze with the round button. Like that one but my husband needed more that I did it I gave it to him. He is old, but the player is still so today.
The second was a Sansa Fuze + with the touchpad. The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum. After trying a few suggestions, I finally accepted that he was a Goner.
I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day. In fact, I needed only when I had disorders of sleep during the night; I probably used it once every two weeks or more. I used my cell phone to the device, had no problems until now.
The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird. In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left. This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.
I connected it to my computer, but it did not show "connected" screen Instead, he went straight to the last song I listened to. I thought it was weird so I turned off the player then tried again. Of course, he went directly to the screen of the song. I noticed that the battery icon was showing 'filler '. I thought that if I left it connected to the pc long enough IT would eventually deducted. Two hours later, I checked the computer and it says that the drive battery was dangerously low. I disconnected and then reconnected and this time he said 98% charged. I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off. Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!
My last attempt was to plug into a wall charger and guess what? He went directly to the screen of the song once again. Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or. It's exactly the same problem as my second player, the Sansa Fuze +.
I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago. I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future. He is a big name that comes with the big disappointment!
You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.
By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.
-
Original title: virus Possible?
I am running Windows Vista Home Premium on a Toshiba laptop. The last time I tried to stop it, it froze (got as far as the last screen showing 'close', then didn't). The next time I turned it on the desktop would not load completely (white screen, no desktop icons, accesses start bar) and if I click on the desktop I get a message saying "Windows Explorer is unresponsive. I tried to scan antivirus, but that also froze. I ran Microsoft defender several times, and it always freezes on C:\windows\system32\cmd.exe. While I can access internet Explorer, I can't click on the links that would open a new page (gel once more). Finally I can't yet do a reboot or a full stop. If it's a virus, how can I solve the problem when no anti-virus software is running?
Any help would be greatly appreciated! I just moved across the world and have little knowledge of computers (but I'm much less following the instructions!). The last thing I need is for my laptop to be drunk so I can't communicate with the House...
Hello
Since you have had that protection antivirus in the next message will be methods to
carefully check for malware.TrendMicro must be uninstalled and replaced<- this="" is="" a="" must="" do!="" if="" you="" have="">->
problems to check with TrendMicro.Instructions/TrendMicro removal tool
http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxHow can I uninstall my Trend Micro program removal tools fail?
http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspxList of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leave the file system, Web,.
Operational network (Script and behavior are also recommended in Ver 6 +).Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadOr use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.
http://www.Malwarebytes.org/products/malwarebytes_free=======================================
Do not type the sfcdetails command, copy and paste.
Many files that SFC cannot resolve are not important.
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
put the command from below (copy and paste) in this box and her and then press ENTER.
findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
who creates the sfcdetails.txt file in the folder that you are in when you run it.
So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)=================================================================
Did you do checks memory and updated the BIOS, chipset of low level drivers and major
embedded and separate device drivers?I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.
More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.
You can try to reinstall an OSX, but I doubt if that will be successful.
Ciao.
-
When I click on an e-mail link in Firefox, I get a message in the left corner of my screen that says "mail to: email address. Outlook opens automatically as it does in Internet Explorer. I did my default email in Outlook in Windows 7.
This has happened
Each time Firefox opened
Is when I upgraded to Windows 7.
See this:
http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+... -
Help! My iPod Classic 120 G froze. Pale = 'Media-In' and display the screen = "OK to disconnect with a bar in the middle." Tried the reset procedure, press the "Menu and Center." Without success. Any ideas?
See Re: corrupted iPod classic. If she does not really have a reset set it aside and let the battery completely discharge. It should reset itself when you load again.
TT2
-
My hotmail account is playing up - suggestions pls for the following scenario. I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection. I check the connection and everything is ok. I'm trying to move from one folder to another and sometimees I get the same message. I delete the 'old' content and it reappears in the folder. Everything is very confused. Any suggestions please?
Please try the Hotmail Forum http://windowslivehelp.com/forums.aspx.
-
I have a sansa clip 2 GB V1, and everything was fine until I updated the firmware yesterday. When I press on what the screen has a yellow band on the top and light blue on the rest of the screen. I tried to reset it and re format. Someone knows what's the problem? Oh, and he was left out at 30 degrees.
OK, I've put an older firmware in it... and it works. I guess I shouldn't have updated? O well at least it is fixed.
-
I have a Dell Windows 7 after downloading the critical updates, I get a message saying "Unable to connect to the internet." What should I do?
Hello
1. Once you get this error message?
2. are you able to browse the internet using your internet browser?Step A.
Please check if you are facing the same question when working in mode safe mode with networking.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
e. when Windows starts, use check and Internet explore if the problem persists.
For more information, refer to the article below.
Troubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-modeStep B.
If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.I hope this helps. -
Original title: windows does not
I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs
What can I do?
Enter your bios usually with keys F2 or delete to the first powered
Use default Optimize can be the F5 key and save and exit,
Insert your installation disc or flash media and press F8 or F12 to boot on it
Then use the recovery tools to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7
-
At startup, there is a message that appears on my screen that says: "this copy of Windows is not genuine". Where can I find the product code for the program installed Windows from my computer?
Original title: Windows
Check on the side of the case, the bottom of the laptop, or the battery box.
Try the phone activation, if this fails then download and run the diagnostic utiliy
=================================================
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700-Product key of letters and numbers-
Not confused the letter B with the number 8, the letter Q with the letter O.
the letter G and the number 6.A, E, I, O and u are not used.
=================================================
Run the Microsoft Genuine Advantage Diagnostic tool:
http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
Post your results (copy button) and paste your results into your answer.J W Stuart: http://www.pagestart.com
-
I bought after effects CC from the Adobe website. The screen flashed a messaged saying "your request". I have not received an email from Adobe yet with an activation code. When I check my account it says I have no purchase. Don't know what to do next.
Hello
Please see the following links:
Manage your creative cloud membership
If you still need help please contact support: contact customer service
*Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.
Let us know if that helps.
Kind regards
BANI
Maybe you are looking for
-
How can I create a filter to remove only "junk" from the server?
One of my email accounts is an important customer. I manage their online customer service. Normally our protocol must always leave all messages on the server, so that one Thunderbird account, I never put delete messages on the server. But the account
-
Hello With my P1 I am facing a problem where the phone is not in mode 'sleep'. It becomes active every few seconds automatically. It remains not in mode 'sleep'. Could you please help me here to set the phone to the mode 'sleep'? It is causing batter
-
Generic copy of XP and my product key
I currently own a copy of XP Home upgrade. When I tried to reformat my hard drive that I kept getting an error message that says XP couldn't recognize my PCI Express slot. After searching the Web for ideas that the general consensous was to get a gen
-
Transfer programs and files from vista to windows7 diff computers?
How can I transfer programs and files from my previous laptop running windows vista on my new one that works on windows 7? I have a 320 GB external hard drive... someone please help cause I have a lot of programs on my previous laptop which i have al
-
Cannot install window 10 for win 7 pc.
I had downloaded 10 window, ON A PAGE it says 10 window is ready to be installed, then shows a restart by clicking on it restarts c p as usual, but not with 10 victory & clicking again to restart 3 times, always without change. I have a pc win 7, Int