Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

Similar Questions

• Sansa E250V2 freezes on the current Firmware update

  I apologize if this has been posted elsewhere - I search but could not find anything directly address this issue. The problem:

  Some time ago my Sansa E250V2 gave me a screen that says the updating of the database. The Sansa would freeze at this point. I finally learned here that this problem could be solved by installing the new firmware. I put the sansa in forced MSC mode and addedd the latest version, 03.01.16. Now I no longer get the update database. Unfortunately, I get a 'Firmware update in progress"which continues until I turned off the unit or the battery runs out. Any help you can give me would be much appreciated. Thank you!

  Hi tapeworm.

  I finally found a solution. It was frustrating simple. I had to format the directory root in forced MSC mode. I then updated the firmware again and everything worked perfectly. Thank you very much for your time!

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• BDP 3100 Youtube freeze and Yupp TV does not work after the last firmware update

  Hello

  My Youtube app on the Bluray Sony BDP - S3100 drive freezes when I play any video. It says LOADING... and plays the video completely. But the Player hangs and I have to be able to market. This started happening since yesterday is to say 26/06/2013.

  The other problem is with the YUPP TV App.

  After my latest firmware upgrade June 4, 2013 live channels on the YUPP TV app does not work peoperly. It says loading and will market every 5 to 10 seconds. On demand videos are very good. This began to happen immediately after the upgrade on June 4, 2013 (M14. R.0136). but after that, there was a more updated firmware that says that connectivity issues fixed on 08/06/2013 (M14 Version. R.0138). I've updated on my player. Yupp TV questions are still there. YouTube has been fine since then, but then the Youtube above issue started happening since yesterday and I have reported to the Youtube community as well.

  Could you fix Yupp TV, I'm sure that updating the firmware.  Also please check if Yout tube is with the firmware...

  Let me know if you need additional information.

  Thank you
  RAM

  At least I'm not alone, until a few days earlier, alls well, now, I have the same problem, so that makes three of us.  New default factory setting does not so I think a firmware issue, all other channels & functions outside of youtube look... very annoying

• Sansa e280 v2 dilemma - have the last firmware update

  Here's something I didn't know.  I use the USB - MSC mode and try to sync to the computer - I no longer receive a screen that gives me the possibility of "non-action" with the red circle and line through it.  I used to be able to copy / paste of my C drive on drive E to download music.  Now, I get a screen that gives me the option to open with Explorer, win media, acrobat from adobe, wordpad, etc., which none do let me open the Sansa to copy and paste as I used to do.

  I tried the trick of the hold and touch start up rew button.  The computer recognizes the sansa as drive E and F as a flash drive (even if it is that nothing installed as a reader of F).  Quite confusing.  Most would appreciate some tricks of the trade...

  Tapeworm... it was the auto run after all settings.  Problem solved.  MUCHAS gracias!

• my Media Player does not work (Vista) in a website after my last windows update.

  I have a virus scanner, checked my computer by running sfc/scannow and everything was fine until I do now.  The media player works when I open the program and just run or burn a CD.  I can also listen to live radio on my computer but nothing of a Bank of audio that uses the media player.
  

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _______________________________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  and make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Shutdown after the last firmware upgrade problems

  After the last firmware update, I have questions turn off my rocket. If I try to turn it off during audio playback, the screen goes all black and turns off, and when turned on, it passes again by updating of media. She does whenever I turn it off if I do not push the button "Play/Pause" first. It's very annoying - anyone else knows this or can help?

  Sansafix said that it will be fixed in the next firmware. So far, just press the Center button until you turn it off!

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• Stuck on "the porgress firmware update"

  My son tried to add a few new songs, but for some reason any that it got stuck on "a refresh database" no matter what we tried, I couldn't get out of this. Then we tried the update of the firmware auto it wouldn't recognize the drive because he was in mtp mode?

  There is no way to change because you cannot access the GUI of the player. We started the sansa with hold/lock on and pushing the rewind button or what ever that is. And then we can connect and firmware has been added. He said to unplug the usb cord so he can take place and we did it he went immediately to the "the progress screen firmware update" I kept check on this subject and he stayed there for hours I let go until the battery ran out. I have rehooked the usb cable to the device to it turned on and it still says the current firmware update and is stuck there. It's the e250 V2 he says only he back that we connected using mac and linux windows. No idea how to solve this problem?

  That's what I did that worked. I turned it maintenance/lock held the central button and inserted the usb cord. Once windows recognizes the device I went to my computer and the root directory entry of the I DELETED MTABLE. SYS once it has been deleted, I turned off immediately and turn it back on. When she came back on the updated database and I could connect normally. I dropped the new firmware in the directory root disconnected the cable and it said the upgrade of firmware and then accepted said and rebboted and he's fine now. Thank you for all your help and suggestions.  One question is what usb mode would work well with windows xp/vista, mac osx and linux (ubuntu)? Because we often move between these systems.

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

  Hi, I had the system work perfectly without any problems until he informed me of the 4.1.15 updated. I went ahead with the update and now the backups are incomplete. It stops around folders starting with Mr. to make things worse, backups are reported as successful. I checked the old backups and they do not have a problem. Is it possible for me to go back to the old firmware update? I'm not sure than I had before but and I don't know how to find out who. Model: ReadyNAS NV + [X-RAID] Serial: 23J5127N0033D Firmware: RAIDiator 4.1.15 [1.00a043]

  Should he behave differently if you select Remote: Windows/NAS (Timestamp) ?

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product.

  Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product. When I try to activate I tells me it is already activated, they have been running fine since 2001 when the Office Proffesional was legally purchased.
  The pop-up with activation message has two buttons, "Remind me later" and the button "more..." which seems to send me around in circles when it is followed.

  Hi Dudlion,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think