Sansa Clip

Similar Questions

• Transfer from Windows Media Player to Zip Sansa Clip

  In the end, I am creating playlists on my Sansa Clip Zip. So I think THAT I have to create a playlist in Windows Media Player and then sync my Sansa Clip Zip. For some reason any I am only able to see 5 playlists, but I know that I have created several of them. In fact, if I try to create a new play list using a name I know, I created, it is said that there are already. How can I see ALL my playlists?

  Also, if I click on playlists for the Sansa Clip Zip it shows I have 9 playlists, but I can't see what they contain!

  Hi Nymickey,

  I suggest you to contact the Sansa Clip Zip support for better support associated with Sansa Clip Zip and check if it helps.

  http://KB.SanDisk.com/app/ask/session/L2F2LzEvdGltZS8xMzM4MDA4NzQ5L3NpZC90QmxJQjJaaw%3D%3D

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• Sansa Clip and Slacker Radio?

  Does anyone know if the Sansa Clip will work with Slacker Radio?

  Any info is appreciated!

  As Slacker internet radio, and the Clip (or indeed any Sansa player) is not, I don't see how.

• Power outage Sansa Clip

  Hello

  I have a 2 GB Sansa Clip I bought about 4-5 years ago and have been very happy with it.

  He runs the version of the 01.01.30A software.

  However, recently and for no apparent reason suffering from power cuts.

  It would just turn off, no matter how much battery there left, how long it has been running or what he does. And when we turn on (which is sometimes hard to do) he can't remember the last thing he was playing.

  After further tests it seems to turn off when put under different angles, almost as if there is a piece on the inside that is open/close the connection. When shaking a slight ratteling inside there, but I can't be certain that's not making noise power switch.

  Of course, this looks like a hardware problem.

  So, how can I open it and fix it? Is there a diagram somewhere I can look at?

  Thank you

  Max

  Well, I opened it and looked around in there.

  True, the battery had detached from its adhesive strips and pulled the loose battery negative cable.

  Gently, I took out the battery and was able to resolder the wire and test that it works before you all shut up.

  My double-sided adhesive foam Strip seemed to be too thick, so I used a drop of silicone glue to prevent the battery from moving around.

  All together again once, case snapped back and forth between them well.

  A little notation around the seam is a small price to pay for a media player that fully operational once again.

  Thanks for all your suggestions!

• Sansa Clip + question

  Hello, I am really considering buying the Sansa Clip + for the race, and I just want to know one thing.

  When in Shuffle mode and you accidentally skip a song, are you able to return to the song you just jump by pressing the back button?

  I only ask this because my Archos can not, she keeps just still dragging on the back button.

  Thanks in advance!

  Best regards, Daniel.

  Yes.

• Sansa Clip does not

  My sansa clip is on but can not receive music or bring up the menu. What's wrong?

  Is this new? You take off the sticker of the shield? Say the screen if there is no menu? We cannot read your mind; you have to tell us more about this if you want any help.

• How WE / OFF sansa clip jam

  I bought the sansa clip jam, and I can't ON / OFF.
  I need to wait a few hours and sansa clip jam is off and connect him to the load to the sansa clip jam
  Where is the ON / OFF?

  Click and hold the Center button for three seconds. Same on/off button.

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Organize the Audiobook on Sansa Clip +.

  I'm relatively new to the Sansa Clip. I want to put an audio book on which has a set of 11 disks. I created a title on the drive under audio books. Now I want the title create 11, disk1, disk2, etc. subfolders, to copy the torn in each folder of s to do 11 playlists under the title. That doesn't seem to work. Is this not possible.

  Then I thought about being smart and merged all tore up the files from one disk to do a big mp3 fle (60 + MB) and do this 11 times and copy them under the title and create a playlist. The player doesn't and hung. What gives? Any help wil be appreciated.

  Well, this is what I discovered. Each record indicates that a separate under audio books book. So I changed the label of the album of each disc to the Heading1, Title2 etc and it works. Thank you all for your help. Very much appreciated.

• Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

  Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

  You try to reset by pressing the power button / stop 20 seconds does not help.

  Using different USB ports does NOT help.

  The cable using different USB does not help.

  Another computer has NOT appeared.
  

  SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

  Jonathan Bailey is me:

  Kyle Ahmed is the man of SanDisk tech support:
  

  
  

  Of the troubleshooting information for "not recognized by PC.
  ***************************************************************************

  Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
  Jonathan Bailey: black, Sansa Clip +.
  Kyle Ahmed: Please provide me with the ability as well?
  Jonathan Bailey: I think it's a 4 GB
  Kyle Ahmed: Please tell me when and where did you buy this drive?
  Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
  Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
  Jonathan Bailey: No, it is not when connected by USB.
  Kyle Ahmed: Please tell me, are you using Windows 7?
  Jonathan Bailey: Windows 7
  Kyle Ahmed: I understand. Please connect the player to the computer.
  Jonathan Bailey: It should say READING and WRITING.
  Kyle Ahmed: very well. If you please, right click on computer and select manage.
  Kyle Ahmed: Click Device Manager in the left pane.
  Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
  (if the player has MSC) 2. portable (if the player is set to MTP mode)
  Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
  Jonathan Bailey: a yellow exclamation point icon
  Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
  Jonathan Bailey: icon done, went
  Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
  Jonathan Bailey: said device still WRITTEN in reading
  Jonathan Bailey: said ball driver software not properly installed
  Kyle Ahmed: very well. Please disconnect the player from the computer.
  Jonathan Bailey: ok, says still WROTE
  Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
  Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
  Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
  Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
  You should see it in the devices with removable storage section in the computer.
  Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
  Kyle Ahmed: Check if the drive is recognized by the computer.
  Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
  Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
  Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
  change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
  by creating playlists with Windows Media player to transfer songs from your player.
  Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
  Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
  Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
  Removable storage in the computer (Explorer)?
  Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
  Kyle Ahmed: Please disconnect the player from the computer.
  KKyle Ahmed: Please activate the drive.
  Kyle Ahmed: Then go to settings > system settings > USB mode.
  Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
  Kyle Ahmed: PSG and click the Center button to confirm.
  Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
  Jonathan Bailey: OK now recognized as his former self again.
  Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
  Jonathan Bailey: I have not checked the media player yet
  Jonathan Bailey: it is recognized in Explorer
  Kyle Ahmed: Please disconnect the player from the computer.
  Kyle Ahmed: To check the version of the Firmware of the player.
  Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
  Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
  Kyle Ahmed: Go to settings > system settings > Info.
  Kyle Ahmed: Give Me the version of the firmware of the drive please.
  Jonathan Bailey: Version V01.02.16A, isn't it?
  Kyle Ahmed: It seems that the version is up-to-date.
  Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
  songs that have been transferred, which can take the time to read.
  Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
  Kyle Ahmed: I understand.
  Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
  Kyle Ahmed: You should not face additional problems.

• Sansa Clip + doesn't turn on

  I need to know how to get a replacement for my Sansa clip.  It was purchased through Amazon on 2.19.14.

  It lights when not connected to the computer.  It remains quite dead.  It lights up when it is connected, and it is recognized by the computer.  I am able to transfer files when it is connected to the computer.  As much as I know it was not dropped or damaged.

  I tried things.

  I tried to reset the player several times.

  I tried to reformat the drive

  I plugged in the charger and left more than 2 days.

  I have it plugged into the computer and he left.

  Always as soon as I disconnect the computer it goes completely dark.

  http://www.SanDisk.com/about-SanDisk/contact-us/

  http://KB.SanDisk.com/app/rmaform/session/L3RpbWUvMTQyMTUyMjEwMC9zaWQvamE0S1JIY20%3D

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.