Sansa e250 2 GB limit card memory?

Similar Questions

• My Sansa e250 v1 is VERY strange (memory loss)?

  Today, I downloaded new music and went to synchronize on the e250. My e250 2 GB (v1: 01.02.24A) was dead at first, so I connected on the computer to give a head start to recharge before starting synchronization. After that the music was supposed to be safe on my camera, I turned it back to check and make sure that it is there. Instead of some 300 songs , I've had before (I also have a Micro SD card of 2 GB in there) I find only 11, with the logo of what meant he was on the SD card. (If none of you have the small logo beside it, I apologize, but that's what mine did). When I open the files on my computer first, and then in my Windows Media Player, it shows all my music on the device and also says that the memory is always repeated. When I look on the device itself, he has only these 11 songs. I tried disconnecting and reconnecting the cable charger/sync, reset the battery, everything I can think of.

  ((On a side note, my computer don't bed the SD card when it is in the first mp3 player - it is not since after the first two times, I synced music with her inside. But there were songs that were the symbol of the SD card next to it in the drive. In addition, since the player has had the inside SD card, a small green window pops up on my screen after start of the original mp3 player, saying "refresh database". This has not been a problem until now, but I wonder if this is normal?))

  Any help is appreciated, thanks!

  If any of you have this problem: I just fixed mine.

  Make sure that you back up ALL your music files if you want to resynchronize, because the only way to get rid of this weird problem is to do a complete memory dump - this means entering the Sansa e250 files on your computer WHILE THE DEVICE IS PLUGGED INand delete ALL SONGS, ALL OF THE VIDEO, ALL of these files. NOT the files themselves, those you need. Just the CONTENT of them. Then go into any media player you use and re - sync all. Or what you want there, is irrelevant. Then you have the music in the back. I have no earthly idea as to how it happened. All I know is that I fixed it.

• Problem of micro card SD of Sansa e250

  I have a sansa e250 its works perfectly, but the problem is

  on the micro SD. I have sandis micro SD 2 GB card and I want that it

  to use with my sansa e250 but when I insert the micro SD card

  and connect it to my computer sound empty, no micro SD card.

  my PC can not read the micro SD it is drive: j and reader: k

  but the reader: k says pls insert a floppy in the drive: k, but I fit

  the micro SD card.pls help me!

  firmware version is 1.02.15A

  Edit: I update my sansae250 to version1.02.24

  and then I try to reuse my micro SD card

  and its does not work. What should I do with my sansa?

  I want to use the micro SD card because its only 2 GB.

  With your v1 player (as indicated by your firmware version) you can only use MSC mode when it connects to your computer in order to access (add or remove) songs on the map. MTP mode will not work. Period.

  As c1u31355 suggested, make sure that the card is placed properly into the slot on the side of the player. The lttle Ridge or bump in the middle of the edge on the map will be little difficult to get through the first few times you push the card. Then it wear out a bit on the edge and slide smoothly.

  

  Push it all the way, even slightly beyond the opening until you hear a slight click. He's going (to spring) very slightly here where the top edge of the card is more or less equal or slightly superior to that of the housing of the drive. You will hear a 2nd click. Pressing in there again until it clicks (you should probably use a nail) again, it will release and spring will push out so you can catch it.

  Moreover, just for precision, the card will in the drive upside down (with the bump on top).

  -------------------

  c1u offers a card reader to see if you have a bad card, or if the problem is with your player. If you put the card in the card reader, and you can transfer (drag & drop) of music files, your card is OK, and you might have a problem with the drive.

  Just so you know, you can not 'sync' music to the card if it's how you normally do. This would require the MTP mode which will not work. You have to do drag & drop from the computer to the card. It's the only way. Well, actually you can rip directly to the card, but that's another topic.

• Micro SDHC not recognized Vista when the card is inserted in Sansa E250

  Hello

  I have Sansa E250. I used to have the 1 GB microSD card and I was able to access it on my computer with XP.

  Recently, I bought 4 GB micro SD and SDHC cards. Now I have Vista on my computer and when I connect the MP3 player with HLA card installed on a computer I'm not able to access removable drive of the card and I get an error message.

  Is it a Vista thing? Is there some drivers or firmware that I need to install to be able to use my new card CD?

  How do I install it on my Sansa?

  Thank you

  I installed the Rockbox on my Sansa e250 and it works very well and the new 4 gb SD card works as well.

  I can't load the image well then rockbox is on my presets of radi got all erased. But these questions are fine. I can always switch back to Sansa Firmware.

  Thanks again for your help

• Sansa e250 45 second each time start?

  Is this normal for Sansa e250 refresh database whenever it is turned on, even if nothing has been added or removed from the player?

  It's annoying to have to wait 45 seconds until I can start listening to my music, listed on the radio or use the voice recorder to record something

  If it is a v1 model and you have a card inserted, Yes. It will refresh the database whenever you turn it on. If no memory card is inserted, it will not be.

  This changed when the v2 of the e200 Series variant arrives on the scene. A different processor and firmware eliminated the need for the update at startup when a card is detected in the slot.

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• Sansa e250 questions

  Hello

  I'm new to this Ant thing, and I don't know if this problem has been addressed before, but it would be great if someone could help me!

  I got my sansa e250 for about 2 or 3 years now, I guess, and it has always worked well.

  I turned on the other day and tried to play a song, but it says "wrong track." I know that this can happen sometimes and thought nothing of it. but he spent with all the songs I played.

  In addition, the player was all deleted music out of my playlists and when I went to view album and artist, he said that he had nothing. but according to the song, he said I had 754 songs out there.

  I connected it to my computer and deleted everything on the player, it works and it was always in the same situation, with 754 songs, artists or albums and they were all the "bad tracks!

  very frustrating. I have tried everything I can think of, like everything reset and take the battery, all with the same result!

  When the device is plugged into the computer, it shows all the folders are empty. It is said that no space of memory has been used, there still 1.8 GB of left of the Hall. (what a 2 GB device)

  so if anyone knows what the hell is wrong with it or what can be done to remedy this, it would be greatly appreciated!

  Thanks in advance!

  It is possible that your cord is wrong. But try to reformat via Recovery Mode. I hope that your E250 is a unit v1 - you won't see Welcome to the recovery on a v2 Mode, so we need to try something else.

  It's the excellent Markster step by step:

  Now, to solve the problem.  The easiest way is to just reformat the drive in Recovery Mode.  This will delete all your files, however.  Here's how:

  Turn off the player.

  Slide the HOLD switch to the locked position.

  Press and hold the RECORD button when connecting to the PC.

  RECORD output once you see "Welcome to Recovery Mode" on the screen of the reader.

  You should now be able to find that a new removable drive in my computer called 16 MB-FORMAT.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  Are we clear on that?<>

  16 MB - FORMAT open and create a new folder named sansa.fmt on it in the root directory.  You can now slide the HOLD switch to the unlocked position, use the remove safely icon and disconnect the player.  It will be noticed the sansa.fmt folder, and he saw, format itself and reboot.

• Problems of the Sansa e250 file hierarchy

  Hello

  I'm looking for assistance or advice I tried everything I know to fix this problem and although I looked at related discussions none of them solve my specific problem. I don't know if it's a problem with Sansa or WMPlayer but this is...

  THE PROBLEM

  I want to store music files to the player on the SD card, but they do not appear always on the reader in the correct production hierarchy (songs in the album folder, artist) for example

  (1) Kings of Leon 'only by the night'-1 of 11 tracks appears under the name of the album and the remaining 10 under the name of the artist

  (2) Duran Duran 'Duran Duran' and 'Rio' - all tracks appear only under the name of the artist

  (3) 'The best of Björk' Björk - 50% of tracks appear under the artist = unknown but with the correct album title and the other 50% under the exact title of the artist and album.

  THE ONLY TIME that the files are properly organized on the player is when syncd WMplayer using of PSG but only in the player as this car is the only visible. Subsequently the use MSC to move the music files on the SD card causes problems to appear.

  Using MSC mode to drag and drop files directly on the disc from the drive or the SD card also causes these problems if I using the file manager or of WMPlayer.

  I checked the file 'properties' on the drive or the SD card and in the library of WMPlayer (resident of PC hard drive) and checked the ID3 - tag using Dr Tag and WMPlayer. In both cases, as well as examples 3 details are correct. They all appear correctly in the WMPlayer library and in the correct hierarchy in file manager.

  I tried in vain to solve the problem in the two disks of formatting and deleting the folder 'Data' in the folder 'System '.

  At this rate, in order to properly navigate the reader, I will be limited to 2 GB of disc from the drive... bah humbug!

  & DEVICES

  Device = Sansa 250 2 GB model v.1 with latest firmware installed successfully. Connected via the USB 2.0 port on the back of the PC

  Extended with 2 GB micro SD card memory (works correctly with a card reader)

  WMPlayer v.11 with last port of the MTP Protocol

  Windows XP Home Edition with Service pack 3

  The information may be correct in ID3 tags, but is the correct type tags? If you use the tagging program has several parameters version, set it to write tags in ID3v2.3 ISO-8859-1. He is the only one that works reliably with Sansas.

  If your program does not support, you can free download MP3Tag . It is overwhelmingly the favorite of people here on the forum.

  And since you have a v1, the only way to add content to your card is through MSC. To avoid confusion, I would delete everything on the player (drafted in MTP mode) and re-transfer back in MSC.

• Satellite L350D - what is real graphics card memory?

  Hello
  I want to ask for Ati Radeon 3100 fomr satellite L350D 20 d... im bit confused after the last control...

  front on 64 bit Vista I have been see in DxDiag details abuts memory installed in L350D 20 d. It was 1 700 Mo!

  now I got 32 bones... and in DxDiag and Ati Catalyst I see 700 MB memory graphics card... but I have just instaled a software called HWiNFO32 and I see different k soemthin to what I ca nsee in DxDiag and catalyst... :
  I add screans:

  On this one, you can see Ati Catalyst and in the Information Center are 700 MB of memory in Ati radeon 3100
  http://i43.Tinypic.com/14cttw3.jpg

  on the screan shot u ca nsee DxDiag details abuts AtiRadeon 3100 memory wht is 700 MB... but on the right you can see butts HWiNFO32 and details all my Toshiba Satellite L350D of 20 d and what is weird it me showing that 256 MB on graphics card memory...
  http://i44.Tinypic.com/16m1suw.jpg

  so here's the question... What is really AtiRadeon 3100 memory in Toshiba Satellite L350D 20 d?

  Post edited by: MzytengaM

  Hello

  I found a piece of info Ati Radeon 3100.
  Please check:

  

• Tecra A9 - controller card memory under Windows XP?

  Hello, I have a new Tecra A9 - 51G. I've had to downgrade Vista to XP Professional and evrything works fine, but Windows cannot find memory card contorler, and I can't use 5-in-1 Bridge Media slot (compatible SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card). Please help me. I need this driver. Thank you.

  Hello

  Have you installed all the stuff including utilities SD Toshiba download page?

• Satellite L555 - 10 M graphics card memory

  Hello
  I bought the Satellite L555 - 10 M mobile a few weeks previously. the product describtion says that the graphics card has 1024 MB memory and it can also use RAM. Now, I noticed that it uses 1768 mb of RAM, but for me the 1024 MB of memory are sufficient. So, how can I change the graphic card memory settings?

  Thanks for all answers

  Hi mate

  It seems that you have no idea how to work things together.
  The graphics card sharing memory automatically! Everything is controlled by the graphics driver.
  If the graphic needs of memory then the driver could affect the value and would take a part of the main memory automatically!
  It is not a switch not an option that could be used to change this value.

  So if you ask this-> + why buy a laptop with 4 GB of ram so I can not us it? +
  I have to say; Show me a mobile graphics card that doesn t share memory?

• Card memory ThinkPad E540. Which one to buy?

  Hello!

  I am owner of a 00HFR of 20 6 E540 which came with a card memory made by Samsung (4 GB) (4 GB 1R8PC3L - 12800 S-11-13-B4 M471B5173 EB0 YKO 1432 says on the label)

  I would like to increase the amount of available memory, but the cheapest way. So I have a couple of options if I'm not mistaken:

  Buy a 4GB module pair with the existing, for a total of 8 GB.

  Buy a module of 8 GB for a total of 12 GB.

  If I'm not mistakent, the option are possible, but the 8 G module will be less good preformance over the same module size in both slots.

  I have a few questions:

  Which module should I buy: Corsair, Crucial, Kingston, G. Skill? (Here is the brand my dealer sells)

  I would be very happy to get a P/N for options 4 and 8 GB.

  Thank you very much in advance for your help and response.

  I'd say go with the configuration 4 + 8GB. Any generic 8 GB DDR3L 12800 S should work (avoid even if Corsair; there were a few problems with it and ThinkPads in the past).

• VIDEO CARD MEMORY.

  HOW TO INCREASE MY LAPTOP GRAPHICS CARD MEMORY?

  This question has been asked and answered in another category
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/ba362a6b-fbff-48fb-B738-cc620426a205
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Resolution is dependent on the video graphics card memory?

  Resolution is dependent on the video graphics card memory? If that's true then how much resolution a 2 GB card can support? I mean on what map I'll be able to run a game like 'NFS RUN' on a resolution higher, if I have 2 cards with the same specifications but difference is 1 GB and 2 GB, I don't speak of GDDR3 128 bit NVDI GT 440. ?

  Resolution is dependent on the GPU, and not on the installed memory. The memory will help the screen refresh more quickly, and video help in smoother race.

  According to the specs here:

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-440-channel/specifications

  You should be able to get a maximum digital resolution of 2560 x 1600 and an analog-resolution 2048 x 1536 (VGA). This assumes of course that your monitor will be very high. The highest card ira is limited by the capabilities of the monitor also.

  Thus, the memory card more than video, that you, smooth graphics should work, but it will have no effect on the resolution.

  SC Tom

• Problem with sansa e250

  I have a proplem with my sansa e250 after upgrade. Now, I can't start my sansa. The sansa is frozen. Simply appear SanDisk logo on the screen, the blue wheel lite and that's it.

  I tried several times to reset it by pressing the power on button (menu) for more than 15 sec. It power from this, but when I try to start it again the problem persists - sansa e250 froze after sandisk will apear on screen logo.

  Please help me

  I'm in recovery mode. I downloaded a safe recovery tool (e200fw01.00.12), but when I start it up I got a message from what ERROR Application failed to read the version details!

  I find that I have to put some mi4 file in 16 Bit file. What is it? Where can I find it?