Sansa Firmware Updater fails to install on my PC
Hello world
I can't install the update on my pc.
This is what he wrote when it fails: "Downloding last sansa updater...» X '.
"The installation fails. "Please try again later".
I have tried many times in the past 24 hours and its still the same.
My pc is clean no viruses, spyware, etc., well maintained, firewall does not block it.
Any suggestions?
Most here do not recommend the use of the update. It's a resource hog that will slow your system down and nag-ware is most of the time as whenever you plug your player will be 'phone home' looking for updates. Firmware updates are not very numerous and widely spaced and manually updated (or reinstall) updates usually takes less time than downloading and installing the update.
Tags: SanDisk Sansa
Similar Questions
-
Sansa Firmware Updater fails to install every time...
I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...
I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.
Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).
Any help would be appreciated. Thank you.
SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).
-
Auto. updates fail to install. but Firefox tells me I have the latest version.
Updates fail to install. When the order of Firefox, said I have the latest version and am unable to download the updated version.
Hello
The details of your system it seems that you are running the latest version of Firefox.Although you can visit here and make sure that it.
-
Multisim update fails to install with error.
The regular update fails to install with error: an error occurred in the installation of an update. If this error persists contact technical support OR. It comes to Multisim.
How can this be repaired?
Thank you
Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370
It will help you get a better answer...
Best regards
H S
-
Code 8007045 that appear when Windows Update fails to install important updates
Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".
HOW to hide an update or restore a hidden update
http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well
Hi mikedav,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.
Method 1:
Follow the instructions in the link below which will help you solve the problem.
Tips for solving problems with Internet Explorer
http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx
Method 2:
Follow the instructions in the link below to optimize Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
2829361 update fails to install with error 0x80070005 - Win XP SP3
KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3
Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.
-
I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions. Failed updates are as follows: "Security update for MS Core abuse 4 SP3 (kb2721691)" "Security Update for MS NetFrame Work 3.0 SP2 on Windows Sever 2003 & Win XP x 86 (kb2656407)" "as last but Frame Work 2.0 SP2 & (kb2604092) ' and finally 'as last but (2604110 kb)" How can I get these updates installed? "
Hello
Thank you for your response.
Safe mode is different from boot were the clean boot will help disable you any of third-party applications or starting points which is the source of the problem.
Also I suggest you to see link below and check if it helps.
You cannot install some programs or updates.
http://support.Microsoft.com/kb/822798/
Hope this information is useful.
-
Definition for Microsoft Security Essentials - (definition 1.129.566.0) KB2310138 update failed to install.
Hello
- Is there an error code or the message that displayed when installation fails?
- How you try to install the update? You use the update or you have downloaded the stand-alone pack and tried to install it?
Check out the link and follow the steps.
How to manually download the latest Microsoft Security Essentials definition updates
http://support.Microsoft.com/kb/971606 -
Kb2481109 update fails to install
kb2481109 update fails to install
Hello Charlie,.
Without more details, the only problem I've found that people had with this update has been a problem with this and after you apply the update, this update went through fine.
If you want to know how to ask a question follow this KB http://support.microsoft.com/kb/555375
-
Windows Update failed to install KB2506212. Tried several times (6) and it continues to fail. Any ideas?
Mark s.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
-
I am running Windows Vista and Windows Update fails to install three updates... KB2686833, KB2699988 and KB2709162... the error code is 8E5E03FB which I can't find a solution for anywhere... Please help
Original title: anyone know where I can find a solution for error code 8E5E03FB
I looked in the help and the Microsoft Web site in the world. I tried to startup using MSconfig, activate and deactivate services, I tried the Microsoft Update Catalog. I started by not being able to install six updates and now got it to three and have grown tired of trying to figure it out by myself.
If you have tried everything, including a repair install as stated in this thread:
You've done everything mentioned in this article?
-
Windows update fails to install KB2656368 and KB2686827. Get the code641 error
Original title:
Windows update fails to install KB2656368 and KB2686827
I am running Vista Home Premium. Windows update fails to install KB2656368 and KB2686827. Download error code641 which seems to mean that Windows cannot identify the problem. In the past, it was caused because the installer has been damaged. In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem. However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program. The installation program be fixed right now. Moreover, the tool "Fixit" said that everything is fine.
Microsoft paid $99 for the support. Tech uploaded a new installer. Problem solved!
Still wondering why the question about System Mechanic?
-
WindowsUpdate_80070663
Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate
Hi Juan CarlosPatlan,.
Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.
Reset the Windows Update components
Troubleshooting of Windows Update (same steps for Vista)
If you are unable to install the updates, provide the following information:
- The full version of Windows you have installed
- KB # the update fails
- The troubleshooting steps you have tried
-
Updates failed to install (80007065 B & 800 b 0100 error codes)
Original title: updates could not be installed- Updates failed to install Codes # 80007065 B & b 800 0100
I think it's 8007065B and not as you say not as you said.
0x800b0100 2146762496 TRUST_E_NOSIGNATURE No signature was present in the subject
Try the suggestions in this link:
http://support.Microsoft.com/kb/947821If that does not solve the problem please provide the reference issue KB updated.
Maybe you are looking for
-
Using OsX Yosemite and App Store continues to display the update for iPhoto...
I have a Macbook Air 13 inch, (early 2015) use Yosemite (10.10.5). It came with the Photos app, but iPhoto is still in my applications folder, but is grayed out. However, from the beginning, the App Store showed that I have an update for iPhoto, (I
-
Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes re
-
How to get a recovery media for laptop Lenovo G50-30?
Hello. I recently posted a message on it, which has been partially resolved. I deleted the recovery partition during the installation of Windows 7 and bought a set of recovery discs, but they are not designed for the model that I use. I still have th
-
Hello I bought a P2214H monitor to run with my mac mini, but am linking - the mini is not VGA. DP or DVI, while the monitor is not HDMI or love at first sight. The only thing they have in common is USB - but when I attach via USB there is no option f
-
Download the program from the Internet
I am trying to download the UPS program that says click on 'run '. I can't find "Run" or "Open" to start the download. I have windows 7 on a laptop. Where is he? It is not in my taskbar, which is empty. How do I get this in my taskbar?