Sansa Fuze 4 G v.2.02.28a wrong with gel, formatted and reinstalled the firmware

Similar Questions

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Fully formatted my Sansa Clip, in any case I can reinstall the firmware from scratch?

  I've deleted some songs using a Mac but noted they were still playable from my sansa and when I plugged on a PC the files not found so I decided it would be a fine idea to format the thing and reinstall from scratch.

  I'm having a little trouble finding how do and now starting to worry that my pure idiocy has ruined my sansa clip for me.

  I was running Rockbox when this whole thing started, if that helps at all.

  When plugged into a computer screen 'Bootloader USB mode' bed and when unplugged it reads "File not found", then "USB Plug cable.

  Thank you!

  
  

• My Sansa Fuze 8 GB MP3 player screen is white!

  My sansa fuze 8bg mp3 player is to have a white screen which is tormenting the buzz of life outta me! He can still play music, but I'm getting tired of it... can someone help me? I didn't reset all the songs that I put in!

  I don't think it's my drive hard because it's awesome so far. Also, I found a way to not "reset" all my important files and 'help' with you 'IkTech09 '.

  If your sansa fuze 8 gb screen is as white as the clouds, follow these steps to get rid of this siteeuation:

  1. connect your mp3 player to the computer

  2. you see the white screen (duh!)

  3. press the power button and wait for her to stop

  4 press it again until it lights up

  5. then you will see the Welcome screen again

  that should help you and if you already got rid of your mp3 player, I am ashamed that you've wasted your money and did not try something that might have helped your mp3 player working again.

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.

• Help music Sansa Fuze

  Hey people im new to this someone can so please help me. My problem is that after I bought my sansa fuze I put music inside. I started listening to it and I was looking for a way to listen to a song, return to the list of music music and return to the song. I know how to get back to the list, but how to return to the song without restarting it? is there some sort of button to it or do I have to hold something down?

  the solution click button at home twice

• Sansa Fuze No. more recognized by anything

  Hello

  I got a 8 GB gray of sansa fuze version.

  everything worked well for almost 2 years and even with the latest firmwire is was outstanding

  but since a couple of days, hes no more recognize what whether car stereos pc... nothing

  When I plugged it hes only load but not recognize

  I tried many times to swithc to msc with no result

  I even try to reformat it... with the result that I lost all my songs and even with a reformat I still do not work

  so question... What is next?    my mp3 player is dead?  I have to go buy something else?

  First try a new cord.

• No sound coming out of my Sansa Fuze

  Hello, I got my sansa fuze 4 GB last year and he spent the time of limited warranty. I turned on my rocket today and I didn't hear any noise. I made sure the helmet worked, it was completely plugged, the music was playing and the volume has been mounted. I still have no sound. All I heard was a thud in my headphones every second. He would thump from the moment where I turn it on until I turn it off again. Is there a way to fix this? Thank you

  You could try to reinstall the firmware and maybe formatting (will erase all the files that you put on, you will need to re-charge). Otherwise, it's probably toast.

• Sansa fuze will not update track licenses

  I must have the most ghetto sansa fuze there because I had so many problems with mine. I currently have two. I have the new firmware from sandisk sansa updater program.

  First of all:

  When I connect my sansa fuze to my PC to update track licenses, add songs, etc. that my computer slows down considerably and all internet access is stopped. I can't sign my account on rhapsody because the internet will not work. And since internet does not work when it is connected, I could not update my licenses and now they are all expired. Help, please!

  Second:

  I took the same sansa fuse to another computer. When I plugged on the second computer, I had no problem. However, when I try to update the licenses, the Rhapsody program says that the function is finished. But when I try to listen to music in the "rocket", the "rocket" tells me that track licenses are obsolete. I've updated the entire library and internal and external disks, appears in the pane. I hope this makes some sense. Any help is appreciated.

  It's the limitation of the Janus DRM.  You must update the licenses of track on the same PC as they were transferred from.

  This isn't a fault with Rhapsody, it's part of the way in which DRM system has been designed.  Format RealAudio RAX of Rhapsody has circumvented this restriction by using the Rhapsody from Sansa e200R.

  Regarding the license updates in the last 24 hours, the real servers had issues.  The system is back today!  Yep, I met the same question, a handful of devices update last night.

  Bob

• My Sansa Fuze is photographed... help?

  Okay, so, my computer froze and had to be stopped, and my sansa fuse has been plugged in, now it does not work. I turn it on and get a blank screen. When I plug it into the computer, I see the normal screen of 'Connected', but as soon as I unplug it, welcome back to the white screen of death... Is it all the same to restart or do I need to go to the store I bought it at and ask if they can fix or replace it...?

  You have probably some corrupted data, maybe a transfer was interrupted when the computer froze? Format and reinstall firmware should be all you need. There is no way you describe would have actually broken beyond repair material. I'll copy and paste my advice for reformatting to another thread;

  Try connecthing the reader to your computer, then formatted the player in respect of the management of the disks (if you use windows), then download firmware appropriate for your reader to this thread. Make sure you choose one that suits, as the case may be, you have a V1 or V2 rocket. You can check this by opening the file 'version.sdk' (you can find it in the top folder of the "rocket") in any text editor. Unzip the file, place it in the top folder of your "rocket", and then disconnect the drive. It will install the new firmware, and if all goes well, it should be good as new after that.

• Sansa Fuze Rockbox. Version question.

  Hey guys and girls, I need help desiphering if it is possible to install Rockbox on my Sansa Fuze special. My version is listed in my info like: V01.02.28a

  It's an old Sansa, but I've updated fairly regularly. Countless FAQ told me that the Sansa fuze V2 is incompatible with Rockbox. and if I would try to apply it on the wrong version, I want to brick my machine. But as says the version, version 01.Intro, so I ask someone here who has more experience with this sort of thing to help me.

  Thank you.

  BigBootyHoes wrote:

  Hey guys and girls, I need help desiphering if it is possible to install Rockbox on my Sansa Fuze special. My version is listed in my info like: V01.02.28a

  It's an old Sansa, but I've updated fairly regularly. Countless FAQ told me that the Sansa fuze V2 is incompatible with Rockbox. and if I would try to apply it on the wrong version, I want to brick my machine. But as says the version, version 01.Intro, so I ask someone here who has more experience with this sort of thing to help me.

  Thank you.

  Yes, it is possible.

• How to move files to support 8 GB SanDisk Sansa Fuze player to the computer?

  How can I move audio files of SanDisk Sansa Fuze 8 GB Media Player from my computer using Windows Media Player 10?  I did it in the past with the previous versioins of Media player, but this version does not offer this option.

  Have you checked the web site of Sandisk?  http://KB.SanDisk.com/app/answers/detail/A_ID/389

• No sound on computer, using SanDisk Sansa Fuze 8 GB Media Player Silver

  MyComputer has no sounds

  original post: SanDisk Sansa Fuze 8 GB Media Player Silver

  Hello

  • You receive an error message?
  • What were the changes made before the show?
  • What player you use to play?

  You can check this link:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Looking for a Sansa Fuze helmet

  Hi, I love the headphones supplied with Sansa Fuze. They have a good sound quality and very comfortable. After 4 years of use, my helmet broke recently, and I can only hear through one of the buds. I leaned to replace them, but so far I have had no luck. I was wondering if anyone had any idea on how to get a pair. Thank you these are the ones I'm looking for http://www.pcmag.com/slideshow_viewer/0, 3253, l = 225432 & a = 225358 & po = 5, 00.asp? p = n