Sansa Fuze don't will not load! HELP!!!!!!!!!!!!!!!!!!!!!!!

I have had my sansa fuze since last Christmas.

The first time my sansa fuze wouldn't load I came here and someone told me to hang it to the USB port back because he has more power.

So I got this new computer recently and my computer will not recognize it. I tried to uninstall it in my computer, but nothing works for me.

Any ideas on how to solve this problem

Thanks for the help

First try all ports - and no hubs USB, just connection is direct to the computer.

If there is still no love, go to Settings/Control Panel on the "rocket" and change the USB MSC Mode and see if it charges.

Look in the computer and see which version of Windows Media Player, it is a. (open WMP, click on help and about.)  It must be 10 or 11 to recognize the "rocket" in MTP mode, which is probably what you value. Update Windows Media Player 10 or 11, and you can move on to PSG.

Tags: SanDisk Sansa

Similar Questions

  • Sansa Fuze connects, but does not load and does not appear on my computer.

    Hello everyone.

    I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

    I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

    I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

    If it helps is that I connect to the computer:

    HP Pavilion m7580n

    AMD Athlon 64 X 2 processor Dual Core 4400 +

    2 GB DDR2 RAM 1.8 GHz

    Windows XP Media Center Edition SP2

    Thanks in advance for any help that can be given...

    also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

    Thanks again,

    Josh

    UPDATE:

    Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

    Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

    Thanks again,

    Josh

  • Priv of Smartphones BlackBerry blackBerry don't will not load. The battery with white exclamation point icon! point

    Update: it was not after all water damage.  The day I splashed it I also sink it terribly low on battery.  Here's how I diagnosed and brought it back:

    1 held the power and volume for 16 seconds until what the phone into bootloader mode.  Choose the first option to continue the initialization of the phone.

    2 opportunity expert virtual Blackberry to test all functions of the phone.  Everything worked.

    3. went to settings-> battery.  0% battery does not charge.

    4 powered off phone

    5. "battery charged" the phone:

    1. connect to the most powerful USB charger that you have (for me, 3 amps)

    2. as soon as the battery with white exclamation point icon appears, unplug the phone

    3 phone plug back in.  When the battery icon appears unplug.  Repeat 20 - 30 times

    6. Finally, the phone will start just showing the Red instead of the battery icon.  At this point, that the costs of phone for at least an hour.  The status indicator turns yellow

    7 turn on the phone and load completely

    I learned about the "battery charge" of the old Playbooks Blackberry.  Apparently, the voltage of the battery may get so low that the BIOS of the phone which will detect and not to load.  But during the 10 seconds or so to detect, the battery will be a slight amount of charge.  If you keep pushing a little fresh this way over and over, finally he could get enough power to be larger than the minimum voltage and start loading.

    Good luck to everyone who has this problem.

    ---------------------

    Does anyone know a provider for private blackberry battery? My phone got damaged (by a very small amount of water, not overwhelmed), water and is now show white battery icon with exclamation point and do not start.  I would try replacing the battery to see if it is the problem or if the load circuit. (Yes, I know that this isn't * technique * replaceable by the user, but I have the backcover and can do).  BlackBerry support said they don't sell them and wants to $275 + to fix the device, which is almost the cost of a new private on Ebay. Someone know a provider or have a spare battery that I can buy?

    Thank you

    -Lester

    Edition of the above to reflect the real problem.  The battery is just incredibly low.  Come to think of it, I'd run it for about 2 days and what I thought was caused water damage was just a super low battery. I "battery charge" it.  My discription full of how I did which is updated above in the first post.

  • Sansa Fuze 4 GB will not play songs in folders?

    I took songs that were an artist and put it in a folder which will be organized, but they do not play. Why?

    How can I fix?

    Thank you in advance!

    SANSAS does not read, display, research, reading of files! You can "arrange" their good sound in some folders that you want to, but they will only use the information contained in the ID3tags for sorting in the Player menu.

    BTW, this is probably one of the most hotly discussed on this forum. If you spent even 5 minutes before you posted your question or read Guide the user looking around, probably would have stumbled you on one of the threads a lot, several pages on the cases against the tags and discovered this.

    There is a plethora of information already posted here. All you have to do is look.

  • Sansa Fuze 4 GB will not work in all modes!

    Hi everyone, I have read all the posts on here and throughout the internet and am have a killer of my known rocket.  I tried in Auto mode, I tried in MTP mode, I tried in MSC mode.  Nothing does, just saying that there is a problem with the device.  I even tried uninstalling the USB host controller and reboot, same problem.  I also tried to uninstall the host controller, go to windows/inf and delete infcache, no dice.  I tried this on several machines.  Windows Server 2008, Windows Vista Ultimate, and Windows 7 build 7068.  Hell, I even tried to run through a Windows XP SP3 virtual machine session.

    I'm really going to have to format my computer laptop everything and install XP on its own partition of 10 GB, just for something like that?

    I should mention that there is a short period that it works in windows 7, in fact I got it actually update the firmware.  I went to settings-> USB Mode-> MSC picked and I pressed the button of the environment on the "rocket".  I then connected to the computer laptop while in the middle button and it updated the firmware.  After the update of the firmware I was not able to get it to be recognized.  Very irritating

    Any help would be much appreciated!

    Wow, I can't believe that is actually just worked... on Windows 7 x 64

    Here's how I did it;

    New USB cable
    Another USB Port
    Define the "rocket" Meteorological Service of the Canada and waiting, plugged in and no problem, I just have to put a bunch of songs on this subject

    So all the foregoing fact that I don't know, but as long as this combo works I am happy! Thanks again for the suggestions, guys!

  • BlackBerry Smartphones that don't will not load my landline

    Dear BlackBerry community

    I just got my phone from my supplier, but somewhere I'm done with a F - M1 battery, I remember they gave me the phone to the time where I sent it, the battery, that I should have is a F - S1, I went into a phone store and bought a.

    The first is the purple color code and who must adapt to my phone code is orange, for some reason, only my friends battery works in my phone, in fact, it works in both, but no other batteries work in my phone, coded orange one I bought just tonight.

    What could be the problem, I think that my phone may have to go back but I don't know why you new battery does not work.

    I hope that spomeone can help

    Yours Sincerely

    JTV

    Dear Wolf359

    I solved my problem, I just got another battery, but I am really surprised I got the bad battery in the first place, I don't really know how I got it.

    Thank you for your sense still

    JTV

  • I've recently upgraded to 7.0.1 but Pandora and Gmail keep telling me my browser is obsolete and Pandora will not load anything. Help!

    I have not upgraded for a long time and was probably on a 2.x version of somehow, but last month I finally updated to 6.x and since Gmail and Pandora have told me that my browser is obsolete. Can I still use Gmail but Pandora will not load anything.

    I have cleared my cache and I deleted cookies, but I still get the same error message.

    I use the features introduced in version 6.x, but even this site thinks I use 3.5.9.

    If I have to uninstall and reinstall, how can I do that without losing all my saved passwords and other information?

    Your User Agent indicates that you use Firefox 3.5.9. Click on "Details of the system more" to the right of your original question, then scroll down:

    • Your User Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.9.1.9) Gecko/20100315 Firefox/3.5.9 GTB6 (.NET CLR 3.5.30729) CouponCabinToolbar

    Reset your User Agent by following the instructions in the following article.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Windows XP will not load past the Blue error screen

    Hi, wondering for a while if someone can help me...

    My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

    No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

    So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

    In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

    Thank you, Jay

    Hello

    It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

    To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

    Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

    See you soon

  • My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

    My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

    Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

  • Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading?

    Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?

    You can watch the following article to see if this will help with the error 80070643.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>

    UTC/GMT is 15:50 on Sunday, August 19, 2012

  • Missing OS... Basic Vista restore disk will not load

    I tried EVERYTHING except YOUR solution!  I'm not dummie (well, maybe), but it's me and some friends very tech savvy absolutely perplexed.

    Stage 1:   Dell Inspiron 1545.  Zero out HD.  Restore disk will not load.  Black screen States:

    Missing operating system
    Press a key to reboot_

    Scene 2:   Windows 7 (not a working copy) does very well, but not Vista Basic.  XP (again, not a working copy)almost loaded!  I even tried loading Vista on Win7 nothing helps.  Lived all the NTLDR missing, etc., has visited several Q / a forum... you're my last shot at this!  I even tried restoring disks from my other laptop (Toshiba), knowing full well, it produces no result... there not!  lol HD and motherboard are beautiful - I AM able to load OS to 'other' guys... Superblock is now ultimately nonexistent.

    Final:   Current situation: Zero out Once AGAIN , tried to install it, HD has failed.  A ran bootfix and installed SMTDRV.  Always the same black screen and invites as stated above, when you try to load Vista.  The thing F12, the same result.  DVD is fine.  The done of F2 and load default.  Guess that that same result.

    I have Win7, but the funds just aren't there.  I am a student (ISS), but my University is not offered at the discount of Win7.  Please help me to recover my Vista!  Thank you, thank you, thank you... in advance!

    Curtain Call:   Your solutions

    http://support.Dell.com/

    If the Dell recovery process does not work, contact Dell.

    This isn't their recovery process, Microsoft.

    Below is the normal process of recovery of Dell.

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • Windows Movie Maker (Vista) stuck on 'check project files', does not and will not load past to halfway.

    Hey guys,.

    I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

    and since then, Movie Maker will not load one of my projects.

    I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

    It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

    Hey guys,.

    I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

    and since then, Movie Maker will not load one of my projects.

    I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

    It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

    =======================================
    Might be interesting to try to open Movie Maker and go to... Tools /.
    Options / compatibility... tab and uncheck all filters.

    If you still have questions... do a Safe Mode system restore
    at a time before installing the codec pack could be useful.

    * Proceed at your own risk *.

    Using Windows Vista
    System restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

    Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

    Hi akilesh.sharma18,

    Please repost this in the Audio forum from the laptop to help.

    http://en.community.Dell.com/support-forums/laptop/f/3517

  • Why can't load the free version of the monopoly game? I played monopoly for days and now it will not load.

    I've been playing pogo monopoly free version for days and now it will not load. What can I do?

    Hello

    1. don't you make changes on the computer before the show?
    2 is the issue confined to monopoly?
    3. you receive an error message?
    4. How do you try to play the game?

    Method 1:
    Perform a clean boot and check if a third-party software is causing the problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

    Method 2:
    You can perform a system restore and see if it helps:
    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    Method 3:
    If you try to play the game via Internet explorer, then you can try to reset Internet Explorer and check.

    Reset the Internet Explorer settings and check.
    NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  • Some Web sites will not load

    Some websites will not load or partially charge and will be usually just load the site title and nothing else and will have a spinning wheel at the top which will not stop.
    They tend to work on FF before, but no more.

    Also, when I click on another link or something like that it will show the whole page as it is supposed to be for the duration it takes to switch the clicked link. I can, for example, (though I'm pretty fast) click on another link and then cancel it and I'll be able to see the page (in some really weird stuff).

    I read something about Java Script doing this problem, I turned off Java script and I could see some of the sites, but Needless to say that certain features of the Web site are lost.
    Happens on websites very little well but still enough to annoy me. I don't like not only 2 or 3 sites from switching browsers.

    I'm sure it has something to do with Java Script, but was not able to understand that even after reading some of the questions here.

    Here are 2 websites that no longer works:
    http://www.parkablogs.com/
    http://www.latest-hairstyles.com/

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    You can check for problems with preferences.

    Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

Maybe you are looking for