Sansa Fuze not set option

Similar Questions

• Help! My Sansa Fuze has no option of Volume of Normal\High!

  Hey guys, I have looked for a solution on the net but can't seem to find a.   The problem is that, after I've updated my Sansa Fuze V2 with the sansa updater my options for high or normal volume disappeared!   I looked everywhere, but it's just not there!  It's really annoys me because I can barely hear my songs...

  I've updated to version V02.03.31F

  Thanks in advance!  I'd love to be able to walk down the street and be able to hear the music!

  ~ Gnahtte

  Gnahtte wrote:

  Hey guys, I have looked for a solution on the net but can't seem to find a.

  Guess you're not looking in the right places...

  The key is in the release notes contained in the message Firmware update here. The question of the volume must be addressed to meet the requirements of the EU, so you "trick" the player into thinking that it is not in Europe. You will then get your rear volume.

• Sansa Fuze not recognised by Windows 7 laptop

  Hello

  My 8 GB rocket has been recognized by my computer laptop windows 7 the first day I got it, and now it happens as a device "unrecognizable."  When you look at the properties, I get an error Code 43, which means that the device has "reported problems."

  I have tried the following with no luck:

  -All USB ports in my laptop (including my USB Hub)

  -MSC/MTP/Auto modes

  -Cannot update the firmware because Windows does not recognize it

  Add/Remove the device manually in the Device Manager

  Anyone who has something else to try would be welcome.  Thank you!

  Hey Rectangle, thanks for the idea...

  I have to admit that, seriously, I tried all of these crazy solutions for HOURS when I realized that I bought a cable non-sandisk as part of a pack from Amazon.

  I found my Sansa brand cable and everything works as it should.

  DO NOT USE 3RD PARTY CABLES, THEY ARE JUNK!

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Sansa Fuze is not compatible with Rhapsody/Windows 8.1?

  Finally, I replaced my old laptop XP with a new with WIn 8.1.  My two (2nd gen.)  Rocket (no +) devices load OK, appear in Rhapsody as being authorized and allow the transfer of securities with subscription. But once disconnected the two devices think the tracks of the expired subscription.  Rhapsody has this message under Tools > device compatibility report:

  Device for Sansa Fuze 8 GB compatibility report:
  This PC reports that it performs "Microsoft Windows Version 6.2'."
  Transfers of securities of subscription to the devices is not supported by your version of Windows

  Titles that have been imported from CDs play fine. Someone here can shed light on what is happening?  Is is time to reformat devices?  Much thanks is advanced.

  Well, well, well. For all those who might find this thread with a similar problem in the future, I think that I just solved it my problem with the help of the Rhapsody site troubleshooting tips.  It is reset course the Sansa device clock, regardless of it's:

  Asked synchronize the device

  -Reset the clock secure your device
  1. go to the Rhapsody software
  2. connect your MP3 player to your computer
  3. hold the CTRL & SHIFT key on your keyboard and right click the player icon
  4. click on Reset secure clock

• Sansa Fuze don't will not load! HELP!!!!!!!!!!!!!!!!!!!!!!!

  I have had my sansa fuze since last Christmas.

  The first time my sansa fuze wouldn't load I came here and someone told me to hang it to the USB port back because he has more power.

  So I got this new computer recently and my computer will not recognize it. I tried to uninstall it in my computer, but nothing works for me.

  Any ideas on how to solve this problem

  Thanks for the help

  First try all ports - and no hubs USB, just connection is direct to the computer.

  If there is still no love, go to Settings/Control Panel on the "rocket" and change the USB MSC Mode and see if it charges.

  Look in the computer and see which version of Windows Media Player, it is a. (open WMP, click on help and about.)  It must be 10 or 11 to recognize the "rocket" in MTP mode, which is probably what you value. Update Windows Media Player 10 or 11, and you can move on to PSG.

• Sansa Fuze only synchronization not properly. :(

  Hi, I have a sansa fuze 8 GB. Recently I brought some new music, so I happily he imported everything in my music Manager. I'm lazy, and since I have all my music with me and didn't want to faff autour. Formatted the "rocket", inserted a 32 GB SD card and sync value to copy my entire library to him. Synchronization completed successfully, but when I disconnect my fuze and scroll to check everything is here says I am very disappointed. I have 2272 files, there is only 525 on the player.

  After trying at least 5 managers music different, all with the same result. I went into my SD card via my computer. All records of my album are here, but most are empty. I checked the files are actually in my music library, they are, just not copied for any reason any.

  If I try to copy into the internal memory of rocket all right, until I get an error message that there is not enough space. I have 9.2 GB of music currently in the library and only 7. Internal memory of something.

  Help, please. I don't think that the SD card can be that some are copied and my computer shows that there is plenty of space.

  Thank you.

  H2testw is how you can tell. Looks like you got a twisted to read as 32 GB 2 GB card.

  I use H2testw to test each microSD when it arrives.

  Read the readme.txt file in the folder h2testw, or look at this.

  http://fightflashfraud.WordPress.com/download-H2testw-free-and-test-Flash-memory/

  If you have tried CHKDSK, you should cut your losses and just get a new microSD card.

  And you can also contact the Play.com still and making threatening noise of prosecutions judicial, counterfeiting, fraud, etc.if you want.

• Help - just sync Sansa Fuze 4 GB and not selected folder names

  I just sync Sansa Fuze 4 my wife Go with Windows Media Player and folder names are not preserved. It's the folder view using the artist name and it is not how the songs were - they were on the PC as "Classic country" etc. That's happened? I have one without Fuze 2 GB that displays correctly when I sync the files... How can I fix it?  I'll try to redo with her in another mode to USB using windows Explorer to load the files and see if that makes a difference, but why the difference between the 4 GB Fuze and Fuze 2?

  
  

• Sansa fuze doesn't recognize the storage capacity all and does not load?

  My 8 gb sansa Fuze only recognizes about 400 MB and will no more. It is just over a year and has worked well before. Nor my sansa fuze or clip will hold most any kind of a charge. The clip is about 2 years old. I recently bought a new computer and I am running windows xp. The two sansas stopped working after I tried to load them into my new pc. What could have caused this and how can I solve this problem? Thank you.

  You can have a file in there that stifles the Sansa, wielding Media update. If it gets stuck, hold the power button and keep it for 20 seconds after the screen turns off.

  Your update is probably spent the USB mode to automatic detection, which will be a PSG connection if it detects Windows 10 or 11 on your computer - but XP comes with WMP 9 unless you have updated, that would send Auto Detect Meteorological Service of the Canada in the event where it is not working properly.

  I suggest reloading the firmware, just in case. Search in the firmware upgrade instructions near the top of the first page of the forum force MSC for the upgrade.

  Then choose a mode - MTP or MSC, depending on what you are used to - rather than the automatic detection function.

  And if it remains stuck, while you are using MSC run Error Correction. Right-click on the drive, properties, tools, error checking. He might find a problem file.

• Sansa Fuze connects, but does not load and does not appear on my computer.

  Hello everyone.

  I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

  I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

  I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

  If it helps is that I connect to the computer:

  HP Pavilion m7580n

  AMD Athlon 64 X 2 processor Dual Core 4400 +

  2 GB DDR2 RAM 1.8 GHz

  Windows XP Media Center Edition SP2

  Thanks in advance for any help that can be given...

  also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

  Thanks again,

  Josh

  UPDATE:

  Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

  Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

  Thanks again,

  Josh

• Sansa Fuze does not turn. * Officially solved! See post 7 in thread for answer! *

  OK, so I put a video that I made using the Sansa Media Converter. I made the video in one. AVI using SUPER and put the file in SMC. I waited on hidden. I'll be back and conversion was hung and stopped at 74. It wasn't a huge deal. It's happened before. I decided to come back in a bit to see if it continues the conversion. When I came back, my drive was off and the percentage bar had not moved. I removed the player and tried to turn it on. It turned on and "refreshed media." Immediately after, however, it stops immediately. I tried a soft reset (button / waiting for 15-60 seconds) and he came for a few seconds only to stop again. More funny thing is though, it actually stopped by itself. He even went to the screen 'goodbye'. Now it won't even turn. He lights and turn off by itself. Sometimes I can turn on soft reset, only that it is black screen. Even when I plug it to my computer, it will be either turn on, black screen after a few seconds or not at all.

  Player: Sansa Fuze 8 GB

  Computer OS: Windows XP SP2

  Firmware: 1.01.15

  Please, I beg you. This will be my second player perfect condition which has out crapped on my Sansa. I had an e2600 who had a hard drive failure after only 8 months. If I have a solution that States "buy a new player", I'm afraid I have to leave Sansa.

  Any help will be greatly apprieciated.

  Very well. I think I finally found the problem of this. The problem seems to lie in the SCM. It seems very harmful effects if during a conversion process, the computer transfers to virtual memory. An update of the firmware seems to correct this problem. Again, I will never video convert on this computer.

  I'll give this time, Sansa. Is not your fault.

  thread

• Sansa fuze will not update track licenses

  I must have the most ghetto sansa fuze there because I had so many problems with mine. I currently have two. I have the new firmware from sandisk sansa updater program.

  First of all:

  When I connect my sansa fuze to my PC to update track licenses, add songs, etc. that my computer slows down considerably and all internet access is stopped. I can't sign my account on rhapsody because the internet will not work. And since internet does not work when it is connected, I could not update my licenses and now they are all expired. Help, please!

  Second:

  I took the same sansa fuse to another computer. When I plugged on the second computer, I had no problem. However, when I try to update the licenses, the Rhapsody program says that the function is finished. But when I try to listen to music in the "rocket", the "rocket" tells me that track licenses are obsolete. I've updated the entire library and internal and external disks, appears in the pane. I hope this makes some sense. Any help is appreciated.

  It's the limitation of the Janus DRM.  You must update the licenses of track on the same PC as they were transferred from.

  This isn't a fault with Rhapsody, it's part of the way in which DRM system has been designed.  Format RealAudio RAX of Rhapsody has circumvented this restriction by using the Rhapsody from Sansa e200R.

  Regarding the license updates in the last 24 hours, the real servers had issues.  The system is back today!  Yep, I met the same question, a handful of devices update last night.

  Bob

• Sansa Fuze is not recognized by my computer.

  All of a sudden my computer does not recognize my Sansa Fuze. I tried automatic switching to other formats on the "rocket". What can I do else?

  Start with Solution 2.

• Sansa fuze will not turn on or charge

  My sansa fuze was working fine until one day when he suddenly cut off and since it lights up for about 10 seconds and cut again once

  Time of a call to the Technical Support Center of SanDisk. If they can't get you Goin ' again, they can get the replacement to the title of their current 1-year warranty.

  Note: SanDisk is in the middle of changing over their customer support to a new system, so it may take a little longer than usual to get your replacement, if necessary.