SansaFuze lights when plugged into the USB port.

Similar Questions

• HP Officejet 8500 A909g is not recognized by my computer when plugged into the usb port

  I received an email from HP recommend I install new software for my Officejet Pro 8500.  I downloaded the software and installed.  The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer).  When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized.  I checked the box to install all the software and install the printer later.  Now is back, and the printer is still not recognized by the computer.  Help, please.

  Hi Steve_finch,

  What operating system you have installed on the computer?

  Have you tried a new USB cable or a USB port on the computer?

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• Upgrade laptop XP on the new home network. Shared for laptop drives. Now computer laptop poster not the zip drives that I plug into the USB ports.

  I have a xp desktop machine, an external hard drive, computer laptop xp and a computer laptop win7 on a network home via my Lynksys wireless router.  My friend attached external desktop.  Then shared these discs on the network.  He shared them as drives E and F.  I can access these drives very well.  The problem is that on the computer laptop xp now when I click on my computer if there is no zip drives or anything else connected to the computer laptop USB ports it does not show them.  If I go into Device Manager, it shows the mass storage device connected here.

  Another thing.  If external that are shared and the desktop machine is turned off the coast, I can click the icon to the desktop and it displays the zip drive, that I plugged.  It's like I need to rename or remap something?

  Hi crazypainter,

  When you plugin your USB device, just follow the following process:

  Rigth click my computer-> manage-> disk management.

  You will find your hard drive, cd and USB dirve listed player, you can do a right click on the drive letter and click on modify.

• When I plug my Galaxy s captivate phone into the usb port on my computer, it will charge the phone but will not allow sharing of information from computer phone.

  Original title: usb with smart phone problem

  When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you

  Hi Mike,.

  Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone.

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• Can I print by inserting a USB stick into the USB port of a printer?

  Hello

  I'm trying to use someones printer to print my work (I can't connect intot his computer). The printer includes a scanner and a copier and has a USB port on the front. My friend uses a similar printer to print and seems to be able to print documents that she recorded in PDF format by simply putting in his pen USB into the USB port on the front of the printer, options come for her to choose which document it wants to print and off she goes.

  When I put my USB, my USB content are not started, and I have therefore no options to print. The only option of PDF who came, had to print "USB Disk Pro User Manual". I pressed this option, and a manual began printing I cancelled. How is my friend to print when she inserts his USB pen, and I can't?

  Can anyone help with this?

  Thank you!

  The USB port on the printer is made to connect to a computer, not a USB flash key.  At least not usually.  Want to check your owner's manual to find out.

• AS3 how can you detect if someone shoots their camera into the USB port?

  In AS3 if the SWF Gets a hold of the camera of someone successfully and they begin streaming video everywhere and everything, but then halfway, either they wiggle accidentally their camera into the USB port, or the camera just sort breaks down, or something like that, how can detect you on the user side?  I tried using event listeners and different variables of Mark also every five seconds, but none worked. any of the public properties of the camera or its events seem to be acting funny of all when something happens like that.  And apparently you can just keep analysis the computer for devices (for a good reason, I suppose).

  Is there something I'm missing here?  Is it possible to detect the copy of a user of a SWF file (PF or AIR, but much more important still FP) when their camera has effectively stopped as the result of something goes wrong, like them what she wiggling the computer by mistake?  If so, how?  Thank you!

  Run your code and disconnect your camera. What are the common properties of it? Stop your flow? To return only a framework of specific color? These things can be used to detect, but you are right when you say that you can not detect more than a loss of packets from a NetStream object.

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• PNY USB 2.0 key does nothing when it is plugged into my usb port. running windows7 home premium. Help?

  Windows 7 compatibility page shows pny 4 GB attached mini usb 2.0 drive compatible with no additional downloads necessary. PNY show instructions for loading manually driver for win 98 only. Download driver I tried the detective, no help. all of the suggestions. try to use the usb for quicken deluxe 2010 backup instead of cd

  Hello

  For this USB drivers should be installed automatically by Windows 7, when you connect the player to what messages we get as appropriate, if you open the computer to open the drive it appears as a removable device?

  If not and with only the connected USB device opened upward Device Manager (Manager type of devices in the area start search to quickly find) then open the USB Buss controllers branch, click it + and looking for USB Mass Storage Device righ click on uninstall, then unplug and plug in the USB pen and see if Windows loads the drivers ok.

  If not there yet with the USB pen connected open disk management and check if the USB key is listed as a removable drive, it may simply need to change its drive letter, change it to X, Y or Z for example.

  Some info on the disc switch letters HERE

  There may be a crisis today... my schedule is already full

• Satellite M30X powers off the power when you touch the USB port

  Hello everyone, just registered and it is the first problem:
  As there is no general hardware forum, I post my problem here.

  I got it twice, my laptop
  (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

  Motherboard:

  NorthBridge: Intel i855GME
  SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
  Motherboard model: Toshiba EAL20

  USB:

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
  Version: 1.0
  Interface: UHCI
  Frequency: 48 MHz

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
  Version: 2.0
  Interface: EHCI

  I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

  Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
  There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

  Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
  I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
  Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

  What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
  Still works well. Now for me, that I broke the USB port Insider somehing.
  I could not determine also the loose parts or unfirm at all.

  Y at - it there, diagnostic software that measures the motto of the port or power problems?
  I have a multimeter, fetch short-circuits with it?

  I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

  Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

  Fabian

  Hello

  I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

  > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

  I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

  However, what we can do is to provide some suggestions and assumptions
  It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

• Insert the cd into the computer, nothing happens. even with the USB key into the usb port. How to make a computer to recognize.

  When the cd is put into the computer, drive works but nothing appears in the desktop and nothing happens when I insert the USB into usb port.  (Can access both by going to 'my computer'.

  Hello VinceBurkis, this thread has been created in the forum Desktop and personalization; the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• E280 plugged into a USB port may be bad and it fried my sansa?

  Hello everyone, this is perhaps my last posting! I am so sad and upset: I just plugged my V1 e280 on a friends computer using a sandisk connector cable I got free on a freebox (variable n ° 1) and plugged into the front USB port (variable n ° 2); He turns, and then now it won't turn at ALL.  I opened the back and took out the battery, and it was VERY HOT.  I messed up with the battery for a while and it won't always turn.  Then I plugged it in USB computer port (my friend just told me, "those before does not work") and still it won't turn.  HOWEVER, a minute or two later, always connected, the BLUE RING OF DEATH on and is always turned on, ten minutes later while the screen is still blank, until the unit is now so hot that they are almost HOT.  I put it in the refrigerator.

  So.  That's happened?  I'm f * cked?  Whose heads will roll for this disaster?  PLEASE HELP I CAN'T UNDERSTAND THIS.

  Thank you very much

  YES, I'M SURE IT IS a SANSA CABLE, it says "SanDisk" on it and is similar to my own cable.  What diff he would do anyway, the device is F - ed.  Also, it turns out that it was the old cable and not the other, although a big deal.  Any advice for me?