SAP TAO

We have SAP TAO working with QTP 11.0 and HP ALM 11.0. Now we're reclassification ALM of 11.0 to 11.5.

should I HP Enterprise Integration Module for SAP Solution Manager updated and integrated to SAP TAO work properly with 11.5?

We are not sure, because we were not part of the previous installation and well in place, we have never used BPCA.

Hi sb10381,

I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/t5/Application-Lifecycle-Management/ct-p/application-lifecycle-mgnt

If you still need assistance, please call our technical support at the 1-800-334-5144.

I hope this helps!

Concerning

Tags: HP Desktops

Similar Questions

  • Sapera with IMAQdx

    Hello, I hope someone knows well the drivers (form Alliance Vision) for cameras Sapera LT. I'm editing of pre-existing code that uses widely IMAQdx pilots. I know that it is most likely impossible but I would use the camera will undermine with imaqdx screws. Is this possible?

    Thank you.

    Hello

    Sorry, IMAQdx is a driver designed to acquire images from GigE Vision hardware, cameras compatible IP (Ethernet) IEEE 1394 IIDC and USB devices compatible DirectShow. It will not work with the Sapera LT who is a third-party capture card.

    The use of the pilot of the Vision of the Alliance, is probably a good choice for your application.

    -Christophe

  • What is the sapi?

    What is the sapi? where I can get tutorials on sapi.

    Speech Application program interface (SAPI). Google 'what is the sapi' and you can find a lot of information about this.
    http://www.Google.com/search?q=what+is+SAPI&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - org.mozilla & client = firefox-a

  • Sapera LT with CVI

    Now this is heresy...

    Anyone could use a framegrabber DALSA and the Sapera LT C programming API to capture video from a CVI application?

    DALSA announces a C API language, it is not certain that it is possible to work with something else using PVC as a C compiler (which it can do - PCV is also a compiler C89 but not a C99 compiler).

    Thank you.

    You can do with the api of 'base' which is a Sapera ANSI C interface.  I had to UNDEF as some multiply integer type limits, then he compiled, linked and ran everything is OK.  I used the interface "framegrabber' rather than the 'camera' interface or"peripheral"to catch a ground test on a simulator.  I used the CCA and .cvi files that I created using CamExpert.

    I did it with CVI 9.1, WinXP SP3, will undermine LT 7.0.0, X 64 driver 1.5.  Works with single and double head X 64 acquisition cards.

    So using a framegrabber NOR is nice, it is also possible to use a framegrabber DALSA of CVI.

    Menchar

  • IE8 with SAP Business Warehouse

    After installing IE8 update I can't use SAP Business Warehouse queries, which return the error messages.  I uninstalled IE8 and the update of security for Microsoft Office Excel 2007 KB969682, which restored the BW feature on our professional XP laptops, but it does not work on my Vista laptop.  It seems that some elements of IE8 remain behind.  How can I remove completely all changes made to the IE8 update?  I tried to restore to an earlier date, but gives me a blue error screen when I restore to a date prior to 6/16.

    I use a Dell Latitude E6500 running Vista SP1.  However, the incompatibility of BW and the incompatibility with the Excel security update occurred in 100% of the machines on which they were installed they are under Vista or XP.

    Hello Mike0653,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Sorry to hear you are having a problem with this and I understand your frustration.

    Try the following steps:

    IE8 system requirements
    http://www.Microsoft.com/Windows/Internet-Explorer/support/system-requirements.aspx

    How TO solve IE8 installation problems
    http://support.Microsoft.com/kb/949220

    I highly recommend to disable your antivirus and anti-spyware (other than Defender) applications before install (or uninstall) an update of IE.  If you use a third party firewall, I would recommend the neutralization of him and then activation of the front Windows Firewall install (or uninstall) an update of IE.

    Tip: Restart twice after installing IE8 Final.

    Tip: Make sure that your antivirus application and your third-party firewall (if applicable) all (other than the Defender) anti-spyware applications is supported in IE8 Final before decide you to install it.

    Assistance for the installation of Internet Explorer 8, installation and use (only) is available via the phone based on your locale through December 31, 2009. Clients must be running Windows XP or Windows Vista in a domain environment. U.S. & CA residents: 866-234-6020.
    Other:
    https://support.Microsoft.com/OAS/default.aspx?&PRID=13043

    Pasted from http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/9c5f373e-7667-4d6c-aa10-84185dccf887>

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Sapera LT used with CVI

    Is that what someone has successfully used vision of DALSA, Sapera LT, with CVI library?

    Sapera LT supposedly has a C language interface.

    I have this poster in the forum of machine vision, but he seems to be more a SW problem (if, indeed, there are problems) a matter of HW.

    In principle, any standard interface of C (C89) should work with CVI I think... If it's for a framegrabber DALSA, or anything else.

    I was just curious if anyone had tried this specific thing, and if so, how it worked.

    Thank you

    Menchar-

    It turns out that you can use Sapera LT with CVI 2009.  You use the api 'base' which is an interface in ANSI C with the export header file and import for the DLL library is involved.  During compilation, I found 6 #defines which were redefined to somehow - the limits they were constant max on the different types of integers.    It seemed the stuff of limits.h, but it wasn't - I never figure out how or where he defined twice, so I just #undef had these just before the place where was held the redefinition and the problem disappeared.

    I was unable to use the framegrabber as a "camera" (peripheral), I used as a 'framegrabber"and loaded separately from the configuration files CCA and .cvi instead of a camera (.ccf) configuration file.  I have hooked up to a simulator CameraLink and grabbed a focus, then he wrote on the disk.  A close inspection of the data showed that it was seizing everything is OK.

    I used the 1.5 LT Sapera 7.0.0 and X 64 driver version.

    So I feel pretty good about this so far.

    Menchar

  • SAP check printing with OCRA Questions

    We are researching the possibility to print cheques from SAP ERP (ECC 6.0) which have a requirement of the Bank for the use of fonts OCRA for analysis.   Everything I found, it does not appear that all HP laserjet printers have the integrated police.   Is this correct?   We have a range of HP printers that would probably be used (Laserjet 2420, P3005, P3015, etc..)

    Old posts, I see that there could be 3 options to print fonts OCRA, but the only documentation we saw which refers to setting sapscript seems look option (a) below.

    "Assuming that the printer has NOT OCRA as an integrated policy, you must do one of the following values:

    b get a font cartridge or DIMM (assuming that the printer supports this). you would then have to say your print/request driver (somehow) that the police was available.

    b get a soft-font loaded on a hard drive in the printer (but I do not think that LJ4000tn will have a hard drive?) and similarly arrange for your print/apply driver to use it.

    (c) to obtain a downloadable app-police (encapsulated PCL format) that you download to the printer when required; again, you will need to organize (somehow) to your print/apply driver to use. »

    I guess my main questions are: HP makes all the necessary documentation for impression ocra in conjunction with SAP?   Font cartridges the best option and is there documentation to use?

    Thank you for your time,

    Shawn.

    Shawn

    Glad to be of assistance.

    Note that you may need several different Cartridge/SIMM/DIMM hardware Add-ons to support different target device models (and some are not supported at all?).

    The 'downloadable soft police' option should work with most modern LaserJet printers (i.e. those that support PCL5) except for the cheaper "host-based" ones.

    But I have no idea (if possible) how you would say SAP to use such a font.

    Chris

  • How can I disable sapi 6 and use sapi 5 in windows vista and windows 7

    any body know how to disable the sapi 6 under vista so I can install sapi 5
    because sapi 6 runs outside the visual studio programming environment and cannot be completely disabled in visual studio for tts activating tts recognition is still ongoing and hears the tts and conventional disabling command with sapi 5 is not completely turn off recognition

    or any body know how to turn off the microphone in visual studio
    I found a lot of examples for c +, but the order of the mixer is not in visual basic
    examples of c + convert no more Basic, I was able to find an example of visual basic 6 complex really but I am unable to convert on visual basic studio and like I said it's really complex and very original programming uses I suppose that if I looked at him with her for a year I could understand it
    but right now it's just jiberish

    Hello

    I suggest you post the question in the forums and check them out below:

    http://social.msdn.Microsoft.com/forums/en/categories/

    It will be useful.

  • How to disable sapi 6

    any body know how to disable the sapi 6 under vista so I can install sapi 5
    because sapi 6 runs outside the visual studio programming environment and cannot be completely disabled in visual studio for tts activating tts recognition is still ongoing and hears the tts and conventional disabling command with sapi 5 is not completely turn off recognition

    or any body know how to turn off the microphone in visual studio
    I found a lot of examples for c +, but the order of the mixer is not in visual basic
    examples of c + convert no more Basic, I was able to find an example of visual basic 6 complex really but I am unable to convert on visual basic studio and like I said it's really complex and very original programming uses I suppose that if I looked at him with her for a year I could understand it
    but right now it's just jiberish

    Hello Cindy Jory,.

    Your question about Visual Studio programming is more complex than what is typically covered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please ask your question in the below listed MSDN forum.
     http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

    Sincerely,

    Marilyn

  • Windows Vista - the failed to initialize properly (0xc0150002) - SAP logon

    I have Windows Vista. After the installation of SAP GUI 7.1, when tried to access SAp logon I received this message "the application could not initialize properly (0xc0150002). Click OK to close the application. ». Help, please.

    Thanks in advance.

    Subrata - July 12, 2010.

    http://forums.sdn.SAP.com/thread.jspa?threadID=421729&TSTART=0

    Try to ask in their Forums.

    http://social.technet.Microsoft.com/forums/en-us/appvgeneralsequencing/thread/d55fe4b6-580b-4c7b-b54d-b4289eb5216a/

    Read the above info.

    See you soon.
    Mick Murphy - Microsoft partner

  • vWorkspace and SAP

    Hello

    I would like to know if someone has implemented vWorkspace to publish the SAP Client. If so, please share your experience?

    Best regards and many thanks.

    Michael.

    I have that I also managed to publish SAP client 7.x succsessfully. But for the client works correctly in transparent window mode, I have to use MS compatible mode to transparent window, vworkspace no native mode.

    Which has been implemented on version 7.6 of vWorkspace. I have not tried yet on v8, but when I was talking to DELL support this case they test SAP on the version beta customer of v8 and it works very well with the native window seamliess

    Robert

  • Runtime reports SAP Crystal for Net Framework 4 do not settle in window 7

    How do I run runtime from SAP Crystal reports for Net Framework 4 install in my window 7 successfully. I try to install it in my pc but it pop up who fail to install in my window of 32. What should do? Uninstall Crystal report Basic Runtime for Visual Studio 2008 from my pc. Please I need a guide I want to use the runtime of Crystal SAP for Net Framework reports now. Help, please

    Hi Sage,

    Please write to us.

    The problem you are having with Visual Studio and .NET framework update are supported in Windows TechNet Forums.

    I suggest you to publish the application on Microsoft TechNet Forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

    https://social.technet.Microsoft.com/forums/en-us/home

    Hope this information helps. Please contact us if you are having trouble using your Windows.

    Thank you.

  • IP IVR interfacing with SAP

    We are about to implement the Cisco IP IVR linking to our AS / 400. We have it with our current IVR, so it's easy. In a few months, we operate off the coast of the AS400 to an implementation of SAP for inventory and accounts of users and all this other nonsense. Someone has interfaced with success the IVR and SAP to let me know if this is possible?

    I guess you have to go through third-party programs, such as Java and VXML. We have a customer who use Java with Websphere measures.

    Wei

  • SAPI Wrapper

    A speech synthesis in Java engine. to make it compatible SAPI, a wrapper on the current engine was built in C++ using Microsoft Visual Studio 2010.

    STDMETHOD (Speak) to the wrapper makes a call to the function of speech synthesis on the TTS engine. However, the setup.exe that results (obtained by running the iss file using the Inno compiler), although installed on all Windows 7 systems do not work, IE produce speech synthesized when executing the example of TTS Application.  The code must be built individually on each system and compiled individually iss file to produce the file setup.exe. Could you explain the reason for this?  The SAPI-written wrapper supports Microsoft Speech SDK 5.1.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • AIR - SAP vs AIR - CAP

    Hi all

    Is there a difference between AIR-SAP2602-x-K9 with light and AIR-CAP2602-x-K9 IOS?

    Thank you very much!

    A.

    Sent by Cisco Support technique iPad App

    You can always convert a SAP to a ceiling :)

    By using a TFTP server to revert to a previous version

    http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/u...

    http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

    https://supportforums.Cisco.com/docs/doc-14960

    Sent by Cisco Support technique iPhone App

Maybe you are looking for

  • What is the error console

    What is the use of the error, the web console, notebook, console

  • Qosmio F60-118: noise of Microphone internal speakers

    Since a few weeks whenever I accidentally let touch the internal mic I hear a noise of static on the speakers. Although in the control system is the microphone off. Any ideas how to turn off the internal MIC is really appreciated. Thanks in advance.

  • updates for HP model: a6414f.

    Starts to make a loud humming, groaningnoise during cold starts, ask yourself what might be the causes? Everything andthe answers, comments welcome. Just want or need to know what my choices are also replacement. MFR: HPModel: a6414fSystem type: 32-b

  • Dotted lines are possible without background bitmap?

    Hello I'm trying to get the grid on my graph dotted lines.  After searching around, I think I can only achieve this by setting the background as a bitmap that has the dotted lines on.  Is this correct? I think that this was addressed in the .NET vers

  • Stations of European FM on W450

    Hi all! I recently bought the W450 in New York. Due to work I have now need to move abroad. I'd do it generally go running with music on an FM, but I find that I have problems in Europe. Apparently, some of the station frequency end with even numbers