Sat. 1400-503, SD-R2102 drive: IDE ERROR #1, cont.

Similar Questions

• Satellite 1400: I get IDE-error after upgrade to the slimeline DVD - RW drive

  I have the laptop with a DVD-ROM above it. (Second hand and no manual)
  I have a DVD - RW Drive (SOSW - 852S) I would use.

  I can adapt without any problems.

  It freezes on the spot but for about 2 minutes and then it says IDE-error then it it boot XP.

  When I go into my computer there is no DVD player.
  Have I missed something when I put the disc?
  I can't? t get the BIOS to check it out.

  I tried most of the buttons for example F2.

  Hi David

  It s a clear case for all those who have a little experience with mobile technology.
  You must know that not every drive slimeline is compatible and supported with the device.
  The Player supports uneditable master / slave or c - salt settings.

  In your case, the laptop freezes 2 minutes because the BIOS trying to find STRANGE.
  This is not possible because of wrong settings and pops up the error IDE.

• Replace drive combo 2212 sd - r on the Satellite 1400-503

  Hello world. I have a Satellite 1400-503 through the 2212 mixed sd - r drive that makes the problems on reading and writing of cd and dvd. I want to replace but freezes when I tried to boot the laptop with other devices. The same problem also came with the replacement of the hard disk. When I handed the former parts Notepad starts. I did a bios update without any results. The local representative in Greece (where I live) wants 400 euro to replace the drive. Any suggestions please?

  Thank you George Fazakis

  Hello

  Unfortunately, it is easy not exactly to say why the laptop freezes. Maybe you used unsupported devices. You reinstall the Windows operating system after the replacement of the device?
  If this is not the case, try it.

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• IdeaPad Y560 dvd drive ide or sata?

  Is Y560 dvd drive ide or sata? I want to replace it with a hard drive so I need an IDE HDD is ide?

  _Aurora_ wrote:
  Thank you very much for the answer BUT, I took out the DVD player and its connection to the motherboard does not resemble regular connection of HDD at all.

  Hello

  All connectors/ports sata may not look the same but will serve as the data transfers. The Sata ports are different for different devices, for example the odd and HDD.

  You can see the attached picture in the spoilers below.

  Link to photo

  This a port hard drive

  Link to photo

  I hope you get now why the odd port and the port of hard drive are different.

  Concerning

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

• Work 6 GB/s hard drive IDE oucederomsurlesecondport 3 Gbit/s of the motherboard?

  Hi-
  
  I have HP Compaq DC7700 Convertible Minitowers desktop for home use.
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=3232028 & SPF...
  
  I would like to repalce the HDD (Seagate 160 GB, SATA 3 GB/s) as its problems donations.
  
  (1) do you think that any disk SSD will work with the above motherboard?
  
  (2) if not, SATA 6 GB/s Hard drive with 3 GB/s port of the motherboard above?
  
  (3) these discs hard SATA2 and SATA3 having the same type of power outlet?

  Hello:

  You may encounter a problem if you are installing a drive not HP SATA III any like I did with my dc7800.

  My PC has the first question appears on the document of support on the link below (even if the dc7800 was not among the list of the PCs).

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D & javax.portlet.tpst = ba847bafb2a2d782fcbb0710b053ce01 & sp4ts.oid = 3718645 & ac.admitted = 1379354458533.876444892.199480143

  I had bought a HDD WD Caviar Black 500 GB SATA III and every time I want to reboot the PC or several times in a cold, start I'd get a disc hard not found error.

  Of course, I assumed it was a defective and returned for a replacement disc.  The spare drive did the same thing.

  I have a HP 8200 Elite CMT with a Seagate 1 TB SATA III hard drive.  I put this drive in my dc7800 and it worked perfectly for the last two years, who confirmed to me that the support document affects more than the models listed.

  My recommendation for you would be to get the equivalent Seagate HDD which was in my Elite 8200, which is this one or stick with a SATA II if you can find one.

  http://www.Amazon.com/DP/B004IZN3YI/?tag=mh0b-20 & hvadid = 2478383168 & ref = pd_sl_8m29k5ycix_e

• Tecra M10 - #1 IDE error after changing ODD

  Hello community

  I know that the M10 is old enough, but until last week, worked well.

  First of all, there is no STRANGE access: drive doesn't recognize any media. After changing the STRANGE, I got the error IDE #1. After a little research I found that this must be a matter of ide toshiba cross wiring (?). Found something on the overcoming of the pins, but it did not work. Because I wanted to reinstall Windows XP (but the ODD is broken) I put the HARD drive in another laptop, removing all partitions on this subject, a reinstall a XP clear on that.
  Back on the M10, the laptop does not start but remains in a black screen with a blinking cursor.

  Anyone have any useful suggestions on these issues?

  Greetings and see you soon,
  Herz.aus.Gold

  Hello

  In my opinion the IDE error appears due bad master/slave setting of the new CD/DVD drive.

  The fact is that not all drives are compatible with all laptops. So the best option would communicate with a service provider allowed for a new compatible drive. An alternative, you can also buy the same car from an another computer store

• Satellite Pro 6100: IDE ERROR #0 startup problem

  When I turn on the computer the Toshiba red symbol is displayed as usual. At this point, I have input a password which is accepted. However, a reading "IDE ERROR #0" error message appears followed by

  Intel Boot Agent Version 4.0.18
  Copyright... Intel Corp.
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel PXE ROM
  Insert system disk in drive
  Press a when you are ready.

  I inserted the version of bios and all drivers disc that came with the computer. Nothing happens, and the error message is repeated. I have been told by friends trying to boot in safe mode, but am unable to find it in the bios. It has also been said to try reinstalling windows.
  I'm not sure what to do and would be very happy for any advice on the subject.

  Hello

  Usually the HARD drive is set to IDE #0.
  The PXE error if the laptop tries to boot from the local network, but the cable is not connected or is not possible for the start of LAN.

  In my opinion, there is something wrong with the HARD drive or the BIOS does not correctly recognize HARD drive. I recommend you to check the pins on the HARD drive. In addition, you must change the boot order in the BIOS.

• How can I change the player assigned to the SSD for a SATA instead of the SCSI drive?

  Original title: SCSI instead of SATA

  I built a PC with Windows 7 Ultimate 64 bit.  My C: drive is a Samsung 840 Pro SSD.  The system never worked properly and I discovered that the SSD which is a SATA 3 drive in Device Manager is configured as a SCSI disk.  Someone knows how to change the driver assigned to the SSD for a SATA instead of the SCSI driver?

  Hello Uriel,

  Thank you for your response.

  SATA controllers will normally appear as "SCSI" controllers in windows. It's normal and nothing to worry about. Often the SATA controllers will also be able to run in IDE mode and then they present themselves as IDE controllers, but it is unlikely that they will be able to operate optimally, as the IDE interface is missing some features of SATA. So even if you do not have the ability to set the cache in the Device Manager, a SATA controller is running in mode SATA should work just fine.

  The IDE bus is managed by the controller SATA3, and if this control is set in the BIOS to "IDE" somehow it seems related to the operating system as a SCSI device.  By setting this entry in the BIOS to "RAID/IDE" IDE devices get properly detected.

  This can also occur if you change the BIOS settings for the SATA ports of 'IDE' to 'AHCI' after installing Windows 7.

  I hope this information helps.

  Thank you

• Drive hard error detected on the HP Pavilion dv6835nr with Vista Home Premium bits

  Lately, my laptop has been slow to start. Yesterday, after control electronic, I noticed the screen turned black and only 3 icons were visible: Trash, Firefox and File Recovery... And a lot of small cascade titled windows: System message. and a file recovery window appears and scans to find out the necessary repairs. The message is "your computer is in critical condition. Hard drive detected error. "7 questions of repair, the next screen offers to upgrade my 'demo' (don't have the slightest idea what they're talking of)

  When I click here to activate it, they want to buy such a product.

  Is this a scam or a virus? How can I fix this problem.

  HP Pavilion dv6835nr

  Processor Intel Core 2 duo T5550

  with 250 GB HDD

  3072 MB DDR2 SDRAM

  Please help me...

  Hello:

  Yes, you should try it but do not for get rid of the virus. The drive is bad, but you can try to recover the files you want to keep using this disc.

  The GUI will allow you to explore your hard drive and if there's still life in it, you may still be able to see and copy your files to a storage device portable usb.

  If the Kaspersky Rescue CD cannot access your hard disk, then all is lost.

  Things to consider... dv9000 models are plagued by questions of the motherboard and you can opt for a new PC, rather than fixing you.

  I do not work for HP, so I don't have to think that you buy a new laptop, but you have to consider the possibility of throwing good money after bad.

  If you decide to buy a new hard drive, you can get a 7 200 RPM one which has better performance on a disk of 5 400 rpm, but it shorten the time between charges of battery a bit.

  You will also need to buy a set of recovery disks.  Info to do this is on the link below:

  http://support.HP.com/us-en/document/bph07143

  If you can still read the Vista product key 25 character on the bottom of your laptop, you can also make your own Vista installation DVD.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Satellite 1400-503: question of power

  Hello

  Yesterday, I turned on my labtop Toshiba Satellite 1400-503 model: PSI40E-03CSR-SW (on industry) but the screen was dead.
  I removed the sector and put it on another taken decision-making and the screen turned on telling me the battery is low.

  I removed the power and reconnected it. It worked.
  Today, it's the same (dead screen) I removed the battery (always on the area), but nothing happened.

  I replaced the battery it lit and the screen lit up for topic a minute, but then the screen died.

  Issues related to the:
  -A labtop can always run on sector with a dead battery?
  - Or if the battery must be good to work on the sector?
  -Can you remove the battery, and still works the labtop on food?

  The computer is old about 6-7 years and the only time I use the battery is to be market even if I plug it into the sector.

  I hope someone can advise!

  Thank you

  Answers to your questions:

  1. Yes, a laptop can operate on sector, even with a "dead" battery

  2 No, the battery doesn't have to be good, but it would be desirable to have a good state of market batt. installed.

  3. Yes, you can remove the battery and only work on sector. It makes no difference, but be careful when you remove the power to the machine. ;)

  Simply by typing the reference battery in google, you can google for a new battery. The partnumber begins with "PA" and then a number.
  Welcome them

• Disk utility can't partition [exFAT], 75 GB main drive. Error.

  Disk utility can't partition [exFAT], 75 GB main drive. Error. Trying to create a new partition Windows 10. Since then, Bootcamp is crap. Try to install it manually.

  

  Why not install Windows 10 as a virtual machine in VMware Fusion, Parallels or Virtualbox?

• Agilent Power Supply E3645A IVI Driver Communication error

  Hello world

  I'm trying to communicate to Agilent power using IVI Drivers. I join you MAX Report, all the modules installed on the system.

  When I run initialization of the VI for Agilent power, using the simulation with 'Specific Driver', no errors appear. But when I select "do not simulate", I get this error:

  Initialize IviDCPwr with Options.vi
  The primary error: (Hex 0xBFFA0011) function or method not supported.
  Development: FunctionId: 3, FunctionName: InitWithOptions

  Communicate with instruments instrument using Driver works fine, but using the Drivers IVI is not.

  I tried all the steps in this topic .

  PROMT any help will be highly appreciated.

  Kind regards.

  Shane5ab

  Hello, Tanguy,.

  I am pleased that install the specific instruments IVI - C Driver took care of things.  The differences between IVI - C and IVI - COM can be confusing at first.  I hope the rest of your application development goes smoothly.

  See you soon,.

  NathanT

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates