Sat Pro 6000 - 2 GB SD card is not readable

Similar Questions

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Upgrades for Sat Pro 6000

  OK, I read some of the general specifications on the site and download the manual on the site, and they say different things.

  The manual says that the memory is 200 pins and only take as two 256 MB SODIMM maxing out at 512 MB of ram. Specifications page says it can take up to a gigabyte of RAM and a person says here the 6000 SatPro taking 144 pin SODIMM.

  It's just too complicated to have 2 pages of different specifications mean 2 different things.

  How is it difficult to upgrade this laptop anyway? Here's what I want to install in your laptop...

  PCMCIA USB card 2
  CD - RW in slim Bay
  At least 512 MB of ram

  What kind of specs I will search and is PCMCIA all standard maps? Is it the same for the bay cd - rw slim are all series? I won't go to the toshiba product page to buy these, I'll get them off ebay.

  Hello

  Satellite Pro 6000 can handle with max 1024 MB of RAM. Two slots are available and are compatible RAM modules
  PC133 128 MB memory Kit: PA3085U - 1 M 12
  Kit memory 256MB PC133: PA3086U - 1 M 25
  Memory PC133 512 MB Kit: PA3108U - 1 M 51

  Memory module cover is placed on the lower side and if I remember well is fixed with two screws. It is very easy to add or remove the memory module and you can do it alone.

  On the PCMCIA USB 2 card I can't tell you much because there are many of them on the market. I recommend getting some info from your dealer.

  Please see the s manuals for this unit and you will find a few different compatible drives that can be used. If you n t have it please go HERE

  If you have any other questions, please write again.

  Good bye

• Sat Pro 6000 - need DVD decoder

  I've owned my trusty Satellite Pro 6000 for nearly 6 years. I had to use the recovery disks, then reformat back to factory settings. Now, I am unable to play DVD? s, I wonder for the decoder.

  Why this request is doing now? This can be downloaded?

  Do you mean on original DVD? What application you use to play movies on DVD?

• CD or DVD drives for a sat pro 6000

  a know if I can put a dvd player SD-C2302 model in a high satellite Pro 6000 lab number or number of everything I put in it please?

  Hi Adrien,.

  You are mostly correct in your statement about CD/DVD players for your laptop. However, it is important that you buy only readers with dimensions similar to your current model.

  Generally CD/DVD players come in two varieties, those intended for installing type Tower and one for laptops. These are generally referred to as "slim" or "slimfit".

  To install the new drive, you must usually to unscrew and remove the brackets used to dock your player to your laptop as well as fittings plastic components. These must then be attached to your new drive.

  Computers laptop Toshiba use various commands (Toshiba, TEAC, Mat * a, etc.) then you will usually have a pretty wide variety to choose.

  Finally, you may need to download drivers for your new drive if none was provided or if the version of your purchase an OEM. These can be obtained on the web site of car manufacturers.

  HTH

• My sdhc card is not readable by windows XP

  I'm having a problem with my card memory pny optima sd hc 16 GB. The computer does not recognize that its in the sd port. I unlocked the map and tried again but always the port turns on but when I go check on my computer, the card is not fun. I really need my computer to read the sd card! Help, please! I have an English project due Tuesday!

  Hello Xjamminxjocyx,

  Thank you for your message.  Go to the website of the manufacturer of your computer and download/install the latest drivers for your card reader.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Sat Pro 6000: Unknown Base system Windows XP Prof. v.2002 SP1 device

  Where can I find a diver for a system of Base-device unknown?

  Hello

  All the drivers of Toshiba neccassery that you can find on the official website of Toshiba:
  Visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Satellite Pro A10 - no wireless network card are not not in Device Manager

  Can you help me - Toshiba Satellite Pro A10
  Model no PSA15E-01PFQ-FR
  Series No Y3602494G
  Windows XP Pro

  On the front of this laptop is a wireless switch - this switch is set on, Windows XP Pro can't find any wireless device - Windows Device Manager shows not all adater wireless. You can advice please - what do I need to install driver - this laptop supports wireless?

  Thank you very much

  Owen

  Hello

  Usually, if you have a laptop wireless switch should have a wireless LAN card too. In your case I would try to install the driver. Then the WLAn card should appear correctly in Device Manager:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If that doesn t work, you can try a BIOS update.

  Are you running the factory settings or you have installed your own version of Windows?

• My MacBook Pro shows "the disk you inserted is not readable by this computer.

  After taking my external hard drive WD 2 TB to my best friend for a few days and connecting via USB to its player Samsung Dvd/multimedia, I now have the message above after plugging back on my MacBook Pro. I tried so many difficulties, I found online, but nothing has worked. I even tried to type the command Terminal fix "diskutil repairDisk/dev/disk" and received the message "error repair card: MediaKit reports the wrong partition or no map found (-5324).

  I've seen suggestions of using Disk Warrior, but that seems a little hit and Miss wise success and I can't really afford. This HD were thousands of files on it and was also my Time Machine backup disk. I really want to erase and reformat, but I don't know what else to do! Can anyone help? My MacBook is a model 13 "of 2012 and the HD is a year older. Never had any problem with before this. I realize I should never be plugged on the Samsung device now.

  I eventually found a solution myself. In the case where it happens to someone else, use a program like EaseUS evaluation edition to see if your files are still there and CAN be recovered. After much research, it was clear that the question was a mapping problem caused by plugging the hard drive in the unit of Samsung Media and my MacBook could read is no longer. I ended up using Disk Warrior and it was set to 100% less than an hour. No need to format or restore data to another drive.

  Lesson learned - if you use it on your Mac, connect on something else!

• SD card is not readable on Tecra 9100 / XP

  Hello

  I don't get my SD card running reader. I can install without no problem SD host controller. But when I insert the card nothimg arrives. The LED on the drive is always out. I have XP SP2 Prof running. Driver Tecra M1 or other Toshiba laptops do not work as well. Can someone help me.

  What should I do?

  Wolly

  Hello

  What card SD have you tried to use?
  Not all SD card sizes are supported!

  You can only use the memory cards digital flash secure with a capacity of 8 MB, 16 MB, 32 MB, 64 MB and 128 MB!

• SD 2 GB card is not readable on Satellite P10 504

  I have a satellite P10-504 P4 2.8 GHz/XP with an SD card, when I insert a 2 gb SanDisk sd card it does not read.
  What could do?
  I think that of something maybe drivers upgrade, but I cant find it anywhere.

  Hello

  Unfortunately, the reader doesn't support this format SD card and you will find all the drivers for the SD card. The operating system uses the standard Microsoft drivers.
  In your case, the best way is to buy the external USB card reader supporting multiple card formats.
  Such device simply isn't very expensive ;)

• SD 2 GB card is not readable on the Satellite 2450-201

  I have a satellite 2450-201 with a slot for sd card, when I insert a kingston 2 GB sd card it read doesn´t.
  What could do?
  The sd card Don t have a problem.
  I think that something the perhaps pilots is an upgrade, but I can´t find it anywhere.

  Post edited by: alcoolpuro

  Hello

  You are right. There is no update available. At the moment where the device was on the market, the card 2 GB SD was not available.

  This device is very similar with 5200 Satellite and you can try to use the SD card of her driver. It should be version 2. 0 2. I really don? t know if this can help, but you can try it.

  Otherwise, I really don? t know what you can do about it.

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Re: Satellite Pro 6000 - will not be from hibernation

  I allowed my Sat Pro 6000 to run out of battery at the weekend so I was working on it and it went into hibernation, now I can't get the screen to wake up again. When I Plug and switch on the power led lights up, but the driven system is not. If I leave the power for about 10 minutes, the fan turns on and then turns off again.

  I tried to disconnect the battery cable and the power and left these disconnected from the day to the next, but this did not help. I removed the hard drive and tried in another 6000 and it works fine.

  Everyone knows about this problem?

  Hello

  It seems more like a hardware problem as a problem of Hibernate (software).
  I think there is something wrong with the power of electronic power supply on the motherboard and so the machine doesn't wake up or start impossible.

  I think it will be not easy to fix this problem yourself.
  Therefore an ASP help would be needed I put t see any other possibility.

  Best regards