Sat Pro L10: built in WLAN issues

Hello

I am using the inprocomm WLan on a new satellite Pro L10 running XP Pro with Windows zero configuration disabled.

I have 2 routers netgear acting as access points, with several other wireless devices work well.

I found a few problems:
local network utility does not define the WEP key at startup (and does not work with reliability of boot).
You cannot run the utility except if connected as an admin user.
profile settings not retained "broad machine", only by the user.
the support inprocomm website does not appear to exist (www.inprocomm.com.tw).

most are small problems, but the lack of reliable startup is a major problem. I had an another toshiba I got before reliable machines, but this feels like the beta test software.

the drivers are up-to-date (even if it is not updated on the web site of toshiba, and pilots were dated 2004)

Anyone got directions on how to do it?

I spent a day of evil and cannot do this work anyway for a non admin user, and must always start manually for work at all.

Stephen

Hello.

I m unaware of this key WLan card because it s are not a product of Toshiba but
I found a site with Inprocomm WLan drivers. Please check for this possibility.
http://list.DriverGuide.com/list/company3145/

Do you have accounts for different users on this device?
I think that you need the appropriate permissions for all users.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro L10: How the WLAN status to be always on?

    We have laptops Satellite Pro L10 at school. The button on the front of the machines that allows you to disable the WiFi network is a real pain because it's one extra thing to go wrongwhilst trying to get a laptop to access our network wireless school.

    Is there anyway to disable this button so that laptops will still access wireless networks accessible to the general public?

    Hello

    Sorry but there is not much to do. If the WIFI network is configured properly it won't take long time to connect the laptop to school WLAN. I know it's probably boring to you, but there is not much to do.

  • Sat Pro L10 DVD Super Multi Drive

    I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
    I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

    Hi Christine,

    I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

    • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

    Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

    HTH

  • Sat Pro L10: Cannot install printer

    Hello

    I have a portable Satellite Pro L10 and have had problems to install an HP photosmart 7350 printer.
    After installation if I try to print, the computer indicates a failure to print warning. This printer works very well on my main computer that is running windows 98. So I tried a brand new HP PSC 1610 with the same result.

    But when I tried a friends HP Jet 5500 desktop it works very well. I tried to reinstall the operating system using the restore disc that came with the laptop for each printer has been tried with a new installation every time. Has anyone else had this problem and managed to solve it?
    Any help would be appreciated.

    Thank you
    Tony Jones

    Hello

    Unfortunately, I never heard talk about this. But I don't think it's a problem of unity because another printing works correctly.
    In my opinion, you should check the printer drivers.
    If you have problems with printer drivers, try to use the original OS drivers.

    Good bye

  • Sat Pro L10: Disable the wake on lid sensor

    I have a Satellite Pro L10 and disable all power on/set off the power of the actions that occur when the lid is closed - that's very well under windows, and I have disabled things sur-cloture in the power supply of the control panel section. BUT in PARTICULAR, I want to disable the automatic turning on when the lid is opened (i.e. a Bios or other material toshiba parameter). Where can I do this?

    Hello

    I think that light will be activated if the device is in stand-by or hibernation mode. If you open the cover, the device starts automatically.

    If the device turns and you close the lid that nothing will happen if you defined any action. I think that just display will be switched off, but after opening the lid he display will be activated immediately.

    Auto lights up when option doesn t open cover exist.

    Good bye

  • Sat Pro L10 - its two continuous tone unusual

    My L10 Pro Sat has begun to emit a two-tone sound. This continues when the speakers are turned off, and even when all sources of energy are removed (sector and battery). Any ideas what is cuasing that and how can I stop it.

    Hello

    I am very interested about your case, but I really don t understand you not at all. Two tone without feeding sounds. It's very strange. I guess that your unit is fairly new and the warranty is still valid.

    On this path, it is really not easy to give you some explanations. In my opinion, you should contact Asp and they should check the device.

  • Sat Pro L10... Do I have wireless or not?

    Hi, I have a satellite L10 pro with Mr. centrino processor all software configfree that came with my laptop. I have the button switch on the front that get out me of my screensaver when you press on, but it won't activate m wireless? I know that only some models are equipped with wireless and I bought it thinking it was. do I need any other, a network card or should it be installed? Please help if anyone has a solution to the problem of HRT, thank you

    Hello Karin

    Each unit of WiFi has WiFi label in the lower corner. I put t know what L10 you have, but please check if the wireless adapter is listed in the device under network adapters Manager.
    Wireless network card is listed there?

  • Sat Pro L10: LCD screen and market off button / stop

    Ive had my L10, little more than a week and im having problems with the on off button does not turn on the laptop properly, so I need to keep it easy on and outside. After awhile, it will load up finally. However now wen it starts after about 5 minutes the laptop just freezes. You know the segestions

    Hello

    problems with start-up the machine always indicates a hardware failure. So you should take it to the service to be fixed.

    Good bye

  • SAT Pro 6100 Modem and WLAN problems

    Hi all

    I have a portable SP6100 which had reinstalled WINXP SP2, allows to detect the PCI modem but not install and WLAN installed the drivers but it cannot see all wireless networks. I tried to download and reinstall the latest version of these drivers on the Tosh site and did the MS updates but still no joy. The modem will not install, it says invalid drivers. If removed WLAN drivers, reinstall automatically on reboot (Tosh Wireless LAN Mini PCI Card) but still does not work. Someone had problems with this? See you soon...

    Hello

    First of all, I would like to say a few words on the question of the modem;
    To my knowledge the laptop is equipped with a chip modem Scopio (Agere AC 97)
    You need a XP driver that supports this chips and SP2!

    I also checked the page of the Toshiba driver and found information for Microsoft Windows XP SP2 update.
    It seems that the BIOS should be updated version 1.90 or later!
    In order to check your installed BIOS!

    Now something of WLan:
    It seems that the laptop supports a standard Wi - Fi: 802.11B and WEP encryption.
    If your WLan router has been set at G orto your, you will not be able to see the WLan networks!
    The router must support the 802.11 standards B

    Remember that your wireless network card is compatible with the Wlan router!

    I am owner of 2 laptops. One of the laptop uses a 802.11 has / B card Wlan and my router supports the B/G 802.11 standards.
    A laptop cannot connect to this router because of the different standard.
    Maybe it's the same reason for your problem of s

  • Sat Pro 4310 - built in the activation of the Modem

    The modem has been disconnected by the BIOS.
    I have reactivated but the Modem would not find in Hardware and system/Modem or
    How can I activate the built-in modem?

    Hello

    As far as I know the modem must be turned on and automatically recognized by the operating system.
    Have you checked the Device Manager? Have you seen a few exclamation points?
    If yes then you need a modem driver. This modem driver you will find on the page Web of Toshiba.
    You can also add new hardware by using the option in the control panel.
    Go to the control panel and select Add Hardware. But usually the modem should be added in the Device Manager.

    Good bye

  • Satellite L450D-113 vs Sat Pro L450D-13 x - touchpad issue

    Good day for a novice.

    I bought a Satellite L450D and the touchpad's door as well as the left button is tired.
    I want to replace the entire palmrest with buffer and ebay buttons but cannot see examples of Satellite L450D Pro offer.

    Are they interchangeable?

    Thank you.

    Hello

    Satellite L450D-113 PSLY5E-00J01LEN and Satellite L450D-13 X PSLY5E-01Y01LEN belongs to the same series: PSLY5E
    Touchpad module used in both series should so the same.

  • Sat Pro L10: WXP does not start correctly

    With a few computer startup problems. Screen loads but does not load the widows "xp" logo. So, I went with a balnk screen and no computer activity. Can you help me?
    S

    Hello!

    It can be:
    1. some Windows XP system files are damaged (it looks like explorer.exe)
    2. the machine has probably a virus.

    Suggestion: it is possible to reinstall OS (Windows XP)

  • Sat Pro L10 - loss of display Num/Caps Lock indicators and Volume level

    I have a few problems at the moment...

    First of all, some time ago, the volume level display (a green light that came on the screen) disappeared. I got said that his was due to an update that had to be done, but who for some reason any got rid of the screen. Short take off all updates, is it possible to get this back?

    Second, for the shift caps lock and number lock lights stopped coming. The lighting of the screen to show that the hard drive is written to still works, but just two others next to it (shift caps lock and number lock) has stopped working. Is there a reason for this as an update, or is it just that the bulbs have gone?

    All responses welcome!

    Hello

    With regard to the notification of on-screen volume control;
    This notification of volume level is controlled by software. Possibly Microsoft updates affect this notification and, therefore, it doesn t appear on the screen. I presume that some registry keys have been changed, but I put t know exactly what entries likely to be affected.

    With regard to the second question. illumination of the keyboard;
    Well, it's usually nothing to do with the software installed.
    I think it would be a mistake to keyboard, but it's just my personal suggestion

    I put t know how long the operating system is running on your laptop but it might be appropriate to update the operating system to ensure that the new facility can help to get rid of these questions.

  • Very weak WIFI signal on Satellite Pro L10

    Hello

    I have a Sat Pro L10 delivered without a mini pci wireless card so I bought and installed an and is equipped with an internal antenna behind the screen. When I'm in the same room as the router I have a brilliant connection but as soon as I leave the room I lose all together. The router is fine as the other people have no problem connecting to this. The card I bought made by Agere but is marked as Toshiba, I updated the driver to the most recent I could find which is June 2002.

    Any help on this would be greatly appreciated as I'm tired of dragging this wire around with me.

    Hello

    I think that there is not much to do. I think that the environment has a strong influence on the Wlan signal reception. It of the same question as yours.
    My brother uses the WiFi network at home and the signal is strong enough if it is in the same room but in other parts, the signal is very weak. But at home it can receive WiFi signals without any problem. The signal is strong, also if it is in different rooms

    I think that the walls of the room are the reason for the weakness of the signal.

    But you can see the Wlan card properties in Device Manager. There you can change some settings in the Advanced tab. For example, to disable energy saving, etc.

  • Satellite Pro L10 will not start

    Hi guys,.

    I have a Sat Pro L10 and I have a few problems with it. When I load up, I can enter the BIOS and everything seems fine, however, the date and time does not. I can't ge start beyond that point, it crashes just with a cursor flashing at the top left. The same goes for when I try and boot from CD. When I go out and put the battery back, I get a message saying WARNING CMOS Checksum failed - using the old configuration, F1 to resume or F2 to enter setup. I press F1 and the same again, just a flashing crusor.

    If anyone can help me diagnose this problem and fix it, it would be much more appreciated.

    Best regards
    James

    Hello

    At first read s manual, page 100 as well as page 104. You will find explanations on CMOS Checksum failed.

    To have fully loaded CMOS laptop battery must be powered ON 24 hours.

Maybe you are looking for