Satego P100-10U - no sound through speakers or headphones

Similar Questions

• Pavilion dv6: new headphones, but some emissions are transmitting sound through speakers and headphones.

  Spoiler (Highlight to read)

  Hello

  Hello

  I recently bought a new headphones for the game but had some problems with it and the sound system. A major problem is when I have someone call on Skype, the Skype sound or the call will go through the headphones, but on the other audio from the speakers. I also agree that also what iTunes does not work when I am in a call as well. Some examples would be that if I want to watch a YouTube video during a call, noise would come by the speakers and not the headphones. However, I found a solution for this. All I had to do was turn off the main speakers and the audio was transmitted to the headphones. Another example would be that if I want to run the games through Steam (Garry Mod, TF2, ect.), I get no sound in the game. Not through my speakers or headphones. With one exception, volume of Garry Mod, I can hear through the speakers so that in a Skype call, but I want the sound to come through the headphones. But with TF2, I have no sound whatsoever. If you need more information about me, feel free to ask. Thank you.

  Hello @LayneStaley,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how some programs make sounds through the speakers not the headphones and I'd be happy to help you in this case!

  To make sure that your headphones are used when it is connected to your laptop, I advise you to follow the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which is the main speakers to your laptop). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. Select the device speaker newly enabled, right click and select "set as default device".

  7. click on apply.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Cannot install drivers LAN and Wireless Lan on my Satego P100-10U

  Hi people =)

  II just reinstall WIndows XP Professional on my Toshiba Satego P100-10U.
  I downloaded all the drivers from the Toshiba page and he burned them on a CD.

  I inserted the CD in my computer and installed most of the pilots. But for
  a stranger strange reason drivers network such as LAN and Wireless Lan
  drivers do not work!

  Can someone help me?

  Don't work or you can not install them?

  LAN driver must be installed manually because there is no setup.exe file. Go to an unknown device in Device Manager > properties > driver installation and navigate to the folder where you extracted the driver files.

  Please let me know if it works.

• Satego P100-10U - driver with Windows 7 problems

  Hello!

  Also recommended by Toshiba, I installed Windows 7 64 bit on my laptop for Satego P100-10u. However after doing that I encounter the following problems:
  -There is no noise even if the audio device driver (Conexant high definition Smart Audio HD2) appear to be installed.
  -the SD card is not recognized
  Unfortunately I have not found all the Windows 7 drivers in the download area of toshiba for these devices driver.
  Can someone help me please?

  Thank you very much and greetings

  Gunnar

  Try please install the Vista drivers. They must work.

• Running Fedora core 6 Satego P100-10U would become very hot

  Hi all

  I run Fedora Core 6 on my laptop Satego P100-10U. But there is a problem using
  NVIDIA-Driver. After a few seconds, running Fedora laptop gets very hot.
  NVIDIA sensors show me a temperature about 100-112 degrees.
  Is there a solution, how can I fix?

  Kind regards
  Johann.

  Hello

  As you probably know Toshiba designs and publish own graphics drivers for Toshiba laptops the graphics drivers are not the same thing as the original graphic drivers of manufacturing such as nVidia or ATI graphics card!
  Graphics drivers from Toshiba are changed in order to avoid overheating of the graphics cards!

  Usually, the books don't provide any special graphics card modules but only the module cooling CPU cooling and so the laptop graphics driver controls the performance of the graphics card.

  If the temperature rises to the critical level the driver slows down the map decreases the temperature and heat production.
  Drivers Nvidia or ATI of origin don't feature such support!
  In my opinion, this is a reason why the card temperature rises to highest level!

  Attention, something like that could damage the graphics card!

• No sound through speakers, no sound through headphones, with the exception of a few videos.

  DV7-6c90us w/Beats audio Entertainment PC. IDT High Definition Audio Codec. The drivers are "up to date". Device Manager indicates that this sound card does not work correctly. No sound through speakers. No sound of Blurays / DVDs. DVD reading slow and erratic. Sound will play with some videos, both on the hard drive and online. Sounds Windows play in the headphones. I did a scan of root of Avast Antivirus and PC Cillin Housecall. Not found any viruses.

  Please, any help would be appreciated.

  Download & save the last Audio driver. Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop. After loading Windows, install IDT audio by using the downloaded file.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218634

• NO sound from speakers or headphones

  HP ENVY 15-3033cl laptop PC

  Windows 7 64 bit

  no error message, I was watching a movie when my laptop died. I plugged it into the power source and now there is no sound from speakers or headphones when I plug. I already went through the troubleshooting steps sound but it says there is no problem detected by the device. The computer is still failry new less than a year, but lies outside of the 90 day warranty. Help please.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop and perform a "Hard Reset" for your model, as described in the document of HP here.

  One when you're done, press next to the key ESC that you start the computer to launch the Start Menu, then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Windows 7 Audio problem IDT plays through speakers and headphones

  I recently took possession of old Windows 7 Dell Inspiron N5040 my brother who runs the audio driver IDT HD Audio, the problem is that even when headphones are plugged in, the computer still plays sound on the speakers, I tried to uninstall and reinstall the driver, update the driver software and I still cannot fix. I thought that maybe the problem could be fixed with sound in the Control Panel, however, I can't find the device labeled "Headphones", only two devices listed are "Speakers/headphones" and "helmet of Communications." How can I do so that the system only plays sound through speakers when the headphone is not plugged and only plays the sound through the headphones when they are?

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to play music through the headset and it still plays sound to speakers.

  To better understand the issue, please send us the following information:

  1. This headset works with other computers?
  2. Have you tried to use other headphones? The problem persists?
  3. Are you facing this problem with a particular application or does with all applications of music?

  I suggest you follow the steps described in the article below and see if it works:

  Open the hardware and devices Troubleshooter

  Tips for solving common audio problems

  You can also check the suggestions provided by Aziz N December 13, 2011 and the Mike991 , February 12, 2012 in the article below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/sound-playing-through-Laptop-speakers-even-when/07289d2c-BF3B-4395-9c6f-dfe0c5151821

  Hope this helps, get back to us if you need further assistance for Windows.

• Equium M50-192: no sound from speakers or headphones

  Sound disappears after working for three months. No sound from speakers or headphones. Verification of the hardware system breaks down.

  Help!

  Hello

  If after checking the sound settings package (Panel, controller next to the laptop, etc.) the sound doesn't come out so I guess that the sound card on the Board is dead.
  In this case only the ASP will help you solve the problem. Maybe the motherboard must be changed.

• Satego P100-10U - can only use 3 GB instead of 4 GB of RAM

  Hello

  I have a Toshiba Satego P100 Notebook 10U (Modell Nr.: PSPAME - 004002GR) and now I have done an upgrade of RAM of 2 GB of RAM to 4 GB of RAM. My problem is that my Windows 7 64-bit and my 64 bit Ubuntu, do not use the full 4 GB of RAM. The OSs show me that they are 4 GB inside, but he can already use the 3 GB. BIOS has been updated to v. 4.80 and nothing happened.

  Please help me if it is possible in German. My English is not very good see you ;-).

  Thank you

  Björn

  Hey,.

  How much RAM will be recognized from the BIOS? He sees the full capacity of 4 GB?

  Theoretically, it might be possible that some memory is reserved and used for other hardware components like graphics card or something, but if the BIOS detects the whole capacity everything is ok.

• Unknown device on Satego P100-10U

  First of all, sorry for my very bad English :-(

  I install XP and now the system to say that I have an unknown device and a PCI device without driver. I think one of them is the sound card, but I can't install the rather. "Device not found" is the message. And I can not find drivers for it. If anyone knows what I can do, please help me... :-)

  Hello

  For me it s a clear case Oliver. The device could not be found error message appears because you have tired to install a bad driver.

  Satego P100-10F seems to belong to the PSPAME series.

  Therefore, you need to download the drivers for the laptop PSPAME! Be sure that you have chosen the right set to 100%!

  PS; I recommend you download the drivers from Toshiba European page because AFAIK the Satego has been designed for the European market.

  Best regards

• Whenever I start a call all the sound through speakers instead of headphones...

  Unless I go to Tools>Options>Audio Settings>speakers>Communications helmet I will be able to hear Skype with ordinary headphones only. Unfortunately, all other sounds such as games and Youtube videos are through speakers.

  My laptop is a HP Pavilion dm4 3055dx, I bought last year so it is still in good condition.

  I tried to change the Settings Audio>speakers>speakers and headphones , but that has not worked. This problem occurs yesterday after Skype update.

  Furthermore, I checked my laptop for updates, and everything is updated. I uninstalled and reinstalled Skype. The problem still occurs.

  I made a mistake. Laughing out loud

  Here's how I found the solution:

  I right click on the audio icon in the taskbar next to my time. I went to "Playback devices" then I saw 'Speakers and headphones' and 'helmet of Communication '. I clicked on 'Speakers and headphones' then I clicked "Set as default". I left it like this:

  

• PC dv7 Beats Audio. No sound through speakers. Headset plays sounds

  I tried to uninstall and reinstall the software IDT, worked with the helmet on the internet basic sounds.  Tried to set up the sound, but he will say that he was unable to play the sound, but gives the alert ping with the window to appear.  When I go to iTunes and try to play a song or a movie, when I hit the play button it doesn't do anything (it is not still progress in the song as if the speakers were not on). When I click on the audio icon on the toolbar, it separates now between headset and loudspeaker sounds.  I bought the computer it last June, so it is a few months old and I only play many sound through it if it does not make sense.  Is there anything else I can do to fix this?

  HP Pavilion dv7t - 6 c 00

  Windows 7

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Sound is played through speakers with headphones plugged?

  I had just driven back one of my audio drivers (which is Cirrus Logic CS4206A AB 78) after the last version is not about me. Who restored the sound from the computer, but after trying to plug my headphones into the headphone, I tried to play video files and the sound played through your PC speakers, not headphones. What happens, and is it possible to solve?

  Hello

  Set Microsophone as your default recording device and check if the problem persists:

  Exercise the functions mentioned below to adjust the Microphone as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  c. in the new windows, click on the 'Registration' tab and right click in the window and click disabled devices show.
  d now check if the Microphone is listed there and right-click on it and choose activate.
  e. Select the Microphone, and then click "Set as default"

• I have a problem with the sound to be heard through speakers and headphones.

  Original title: Ok, this is really annoying - need help (Audio)

  OK, so I have a motherboard Asrock z77 Pro 3 that supports the audio 7.1.
  But I have a stereo speaker 2.1 only. So I plugged in any case and began to use - the bizzare thing, is when I connect headphones through the headphone jack on the front, the sound is produced by headphones and speakers. I need to stop this.

  Is it OK to connect a 2.1 to 7.1 channel speakers? (by any channel 1 output).

  Realtek drivers installed.

  When you are using speakers stereo use decision-making (lime green) front speaker.

  Many cable front have two different connectors to connect to the motherboard.
  A (HD Audio if I remember correctly) allows to disable the outputs back when you connect the headphones to the output on the front panel.

  When you use the right connector you should see the option switch when you
  connect or disconnect the headset if you have Panel-Sound-open reading.
  Speakers should be 'default' when the headphones are not connected and when the reverse
  You then connect.

  .