Satego P100 - the screen goes black

Hello

If I turn on my laptop there is no problem. After maybe 5 minutes, the screen goes black and after a few minutes, he just a blue screen. Restarting the laptop. But now I don't have lines on the screen for the display of the BIOS and the power of Windows screen but during the operation. If the laptop is turned on after minutes the same, it goes black and then blue screen.

BIOS and reinstalled system. nothing happens. I think that BIOS is flawed, because there are lines on the screen when I turn on the laptop again.
If I leave the laptop for 15 minutes off the coast, it starts normally but aftern maybe 5 minutes it starts again with blue screen and other funny stuff.

Now - what is someone the problem and a solution?
I think the BIOS is a virus that destroyed. But I think that on a laptop, it is not possible to change only the BIOS. Because the update of it was ok but the problem remains.

Thx for the answers and cordially

I put t think the BIOS is defective. There must be another problem. All that you have done is just. Update the BIOS and the clean OS install are only option that you can do about it.

Please contact the nearest authorized maintainer and let the technician to check your laptop. Let them to test the operation of the equipment using the service tools.

Tags: Toshiba

Similar Questions

  • Satellite P100 - the screen goes black

    Hello

    I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

    The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

    Any help would be greatly appreciated.

    Model: Toshiba Satellite P100-PSPA6A-02NO21
    Processor: Intel Core 2 Duo T7200@2GHz
    GPU: Nvidia Quadro nvs 510 m
    Chipset: Intel i945PM
    HARD drive: Fujitsu 148GB
    RAM 2 GB
    Windows 7 Ultimate SP1 operating system

    Hey,.

    > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
    This means that the graphics card is defective

    Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

    If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

  • The screen goes black when I click and drag text, use the version on my 18.0.2. Thank you

    I'm entering text in the space of your question and click on a Word to drag it to another location, or if I am writing something in an email on gmail and click on a part of the text to drag it to another part of the text, the screen goes black as soon as I start to drag the text

    -Installing and re - install, it's what makes work - although I've still "hardware... use" unchecked.

  • Satellite U920T - the screen goes black when you drag the keyboard

    This morning, I turned on my U920T-10 days but the screen remained black.

    At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

    How can this problem be solved?

    Hello

    For me, it looks like a bad connection somewhere between the screen and the motherboard.
    This could be possible reason for failure to display while sliding in and out.

    I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

    I hope that this can be corrected. I keep fingers crossed.

  • Satellite C660-1J2 - the screen goes black for a second

    Hey everybody.

    I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

    Then, give a shout someone if you know how to deal with this.

    Hello

    > I have recently changed my HARD drive and did a reinstall of fees
    You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

    To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
    Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Portege 7010CT shows Toshiba logo then the screen goes black

    Help! When I turn on the Toshiba logo comes up then the screen goes black and I find myself with a cursor blinking in the upper left corner. Nothing seems to work, keyboard seems locked even though CTRL, ALT & DEL it restarts. Was working perfectly one day, so that the next. Any ideas?

    Hello

    You can start the machine in safe mode? Which operating system you are using? Are you using it for a while or is this first boot after installation.

    Please write a little more. If you give more info and detailed description, it is easier to understand what may be the problem.

  • Satellite L405D-11V - freezes and the screen goes black when you watch the video

    OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

    I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

    However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

    Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

    Thank you

    Hey Buddy,

    You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
    What operating system you use on your L405D satellite?

    To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

    In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
    If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

    If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
    Explain your very detailed problem. I think that everything can be clarified then. :)

  • I'm playing True Crime New York City on windows xp and every time I'm trying to play the screen goes black and then I'm back at my desk.

    Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.

    Hello Respect137, welcome.

    It would appear that running DirectX files installed on your system were corrupt. This gives a test:
    2 follow the instructions which is there to install the package to update DirectX
    3. Once installed, restart your computer and try to run the game
    Let us know if this helps,
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    ===============================
    I don't know what is causing this problem but would be
    suspicious, it is related to a corrupted or obsolete
    video driver.

    Might be interesting to try to reduce your graphics
    Hardware acceleration instructions
    in the following article.

    How to put in back of graphics hardware acceleration
    http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
    (scroll down to: "If you are using Windows 2000 or XP")

    If they improve the question, you should look for the
    site Web of MFG. your video card
    a updated driver Win XP compatible video. Or...
    If your computer is a laptop... Search support
    site of the manufacturer of your computer.

    If you do not know the make and model of your
    Video adapter, see the documentation that
    supplied with the computer.

    Also you can find info on your video by driver
    go to Device Manager: you can launch
    By clicking Device Manager on... Start/run and
    type or copy / paste:
    devmgmt.msc
    And then press ENTER.

    Expand "Graphics cards" and right click
    the name of your graphics... then
    choose... Properties / tab pilot... FYI.

    You should find the make and model of your
    adapter display as well as the version of the driver.

    If the driver on the Web site is no longer
    current than you run...
    Download and install it. In addition, installation
    instructions that should be followed closely
    should be available on the support site.

    Once installed the new video driver... you
    can restore your full acceleration.

    Good luck...

  • Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

    Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

    Hello

    · What is the number and the model of the computer?

    · This occurs when you are working on any specific file format?

    · Were there any changes made on the computer?

    · You play the file in mode full screen?

    Change hardware acceleration

    a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

    b. right-click on a space empty on the desktop.

    c. go to the resolution of the screen.

    d. click Advanced settings, and then click the "troubleshooting."

    e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

    You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

  • At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

    When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

    I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

    The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

    Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

    http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

  • When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

    original title: HELP ME PLEASE!

    (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

    Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

    Take a look at this:

    http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

    Hope this helps

    Post back if necessary

    __________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

    After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

    Hello

    Did you change your computer?

    I suggest you to follow the links and check out them.

    Solve problems with publishing a movie to your computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

    Publish a movie in Windows Movie Maker

    http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

    Make a movie in four simple steps

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

  • Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    original title: Auto Adjust

    Hello.

    Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

    Any help would be appreciated... Thank you

    Try this:

    Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    Then:

    http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    See you soon.

    Mick Murphy - Microsoft partner

  • After I Log In, the screen goes black.

    After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

    original title: after I Log In, the screen goes black. Help me!!!

    Hi Kooper93,

    You can also try theclean boot to see if this is due to a program/process.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for