Satelite L750 is slow, takes a long time to open programs

Similar Questions

• After that effects 2015.3 takes a long time to open, left after the closing process running

  My AE 2015.3 takes very long time to start. He gets the message "Initializing MediaCore" on the splash screen and then hangs there for 1-3 minutes. It opens also a ton of "Adobe After Effects 2015.3" tasks in the Task Manager, leaving them running even after I quit the program.

  Here is what my task manager looks at this time (no AE running)

  

  So far, what I've done:

  1 uninstalled all Adobe software, including Adobe CC Panel

  2 uninstalled all 3rd party plugins, scripts, and presets

  3. manually deleted all files from adobe - complete cleaning

  4. re-installed AE and some other programs

  (all with reboot between the two).

  No difference.

  Help?

  Apparently, nVidia GeForce drivers are at fault. The break of v368.81 WHQL way Adobe applications communicate with Media Core, make After Effects, first and slow speed Grade, leaving the additional processes in their wake and spoil some plugins 3rd party.

  Returning to a previous driver nVidia solved all the problems.

• My CPU runs at 100% without no reason and programs take a long time to open.

  A FEW TIMES WHEN I TRYING TO OPEN A PROGRAM FOR EXPLORER MOMENT HE TAKES A LOT OF TIME IT OPENS

  original title: RUN MY CPU to 100% BY MOMENTS AND PROGRAM TAKES a long TIME TO LOAD what COULD BE WRONG

  Hello

   
  You can try the steps in the following link and check if it solves the problem:
  http://www.Microsoft.com/athome/Setup/optimize.aspx
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  I hope this helps!

• Devices and printers takes a long time to open

  In Windows 7, the devices and printers open almost instantly. In Windows 8 Pro x 64, devices and printers takes almost 30 seconds to open, and it takes a long time whenever I open it. How can I shorten the time required for the devices and printers to open?

  Before you answer, please note the following:
  • I don't get an error message when I open devices and printers.
  • I have not made any recent hardware or software changes to the computer.
  • I experience the same behavior when Windows 8 starting in a boot environment.

  My problem is solved.

  Instead of wasting time on generic solutions, I should look for a specific cause from the start. In my case, the problem was with my scanner. In devices and printers, I open my scanner and selected properties of analysis. On the events under Actions tab, Windows had chosen to 'Interrogate what program to run.' I changed it to "Start this program" and choose my scanner software in the drop-down list.
  Devices and printers now opens almost instantly.

• Windows Media Player takes a long time to open and search

  Slow initialization of WMP 12, research and classification.

  IM under W7 Ultimate 64.
  When I start WMP12 it takes much more time to initialize that WMP11 on vista, 2 minutes before I can even start by selecting music.
  If I do a search it also picks up a similar amount of time and locks (graying out, slider timer). Once I have a bunch of songs loaded on the screen, say a playlist with 200 songs and then click a tab as a note it takes 30 seconds to REList per category during this time it hangs again.
  I have about 40,000 songs in my library. I have rebuilt the library and the database now resides on a second disc which did not make a difference.
       
  (1) what someone else with similar problems and found a solution?
  (2) is it possible to replace it with WMP11 which worked perfectly and was much more intuitive?
  (3) can anyone recommend a replacement player who has gapless playback and fast database access?

  Cheer - Robb

  Hi terrahertz,

  Thanks for visiting the site of the community of Microsoft Windows 7.

  There could be several reasons why Windows Media Player is the initialization slowly.
  Maybe you run several programs simultaneously.

  We will perform a clean boot to find if any software is causing incompatibility.

  Method 1: Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
   
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
   
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
   
  11. When you are prompted to restart the computer, click on restart.

  Alternatively, you can try to uninstall and reinstall Media Player.

  Method 2: Uninstall and reinstall Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  2. go to media features and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.
  

  Visit our Microsoft answers feedback Forum

• Some sites like Yahoomail takes a long time to open

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Offlate, some sites Web opens very slowly. Yahoo mail takes 3-4 minutes to open. most of the websites open up quickly. This problem has been notes 2-3 weeks back. I have Windows 7 on my system and Antivirus from Mcafee. When I open Yahoo mail on my mobile, it opens fine. I have an ADSL connection and all other sites open quickly. How to solve this?

  Hi Nikhil,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what browser do you use to access Web sites?
  2. did you of recent changes made to your computer before the show?

  Please follow the methods below if you use Internet Explorer and check the number:

  Method 1:

  Run the Microsoft Fix It from the link below.

  Troubleshoot Internet Explorer to IE quick, safe and stable:

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  For reference:

  Can't access some Web sites in Internet Explorer:
  http://support.Microsoft.com/kb/967897#Gm4

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  Follow the steps in the link below.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  I hope that the information above helps you.

• Calculation Manager takes a long time to open after application of the correctif.500

  Hi all

  We have our EPM environment in windows Server 2008 and have recently applique.500 Patch and all components work properly except calculation Manager and when I connect to the workspace and open the calc Bishop taking lot of time (8-10 Min) to open and after which I get an error like "there was an error in retrieving the list of typical applications. Please see the log file of calculation Manager for more information.

  I checked the CalcMgr0.log but I see no error here.

  (1) how can open the mgr quick calc without taking a lot of time because the customer does not accept that his lot to take some time to open.

  (2) how can I ensure that I don't get the error above.

  You can see the screenshot of the error above in my blog:

  http://Hyperion-consulting.blogspot.in

  Kind regards

  VJ

  Hi all

  I solved the problem...

• Panel before application takes a long time to open

  I have an application that opens quickly on a single computer and takes a lot of time on another.  What is happening is the icon in the taskbar, but the front panel does not open for a certain period of time.  Both computers are running Windows 7 and the application has been generated in LV 2010.  The main objective of the applications is the capture of images from a USB camera. Communications to the camera is made using .NET components that have been developed by the manufacturer of the camera.

  I was hoping someone could give some ideas on where to start troubleshooting?

  Terry

  I had this issue on a computer that couldn't access the network.

  This is because .NET tries to access the network. You can run this application on a computer connected to the internet? I think you need to uncheck some options

  Panel--> options Internet--> advanced

  

  I think that the three I unchecked were: 'Check the CRL of the editor', 'activate integrated Windows authentication' and 'the server certificate revocation checking. " I'm not sure of the exact 3 I unchecked, but him give a try. Good luck!

• First pro takes a long time to open

  Hello

  I recently installed the latest version of first (2015.4) on a Windows 7 x 64 service pack 1.

  Config: Intel (r) CPU Xeon X 5660 2.80 GHz 2.80 GHz (2processors).  -40 GB of RAM

  There's a blackmagic decklink which works well with the first. An internal RAID5 have been added to the computer.

  When I try to launch the pro first by clicking on the icon or open a project, the startup screen and load the stuffs, everything looks good. When he writes "initialization of the application", the splash screen disappears. The first pro icon is not highlighted more. Adobe Premiere pro is still in process in the Manager list task. Nothing happens for 10-15 minutes. After that first pro appears and everything works in it...

  I cleaned the trash prefs and uninstalled, reinstalled Premiere pro.

  He not take this time early in the week, he was quick and direct. I don't have this problem for other adobe (for example media encoder) applications.

  Thanks in advance to pay attention to my problem.

  A few thoughts that come to mind are to check and remove any third-party firewall and antivirus.

  You could also try creating a new user account Admin and see how it works there.

• SOUL really takes a long time to open the encoding settings

  With the release of the SOUL 2014 versions, I've known wait times very long to open the encoding of employment settings. For example, if I add a sequence of images 1920 x 1080 to the encoder, choose Quicktime as the container and one of the available codecs, by clicking on the name of the codec to open its settings causes a very long delay, maybe 3 minutes, before the dialog box opens. I use a Macbook Pro with Yosemite. Previous versions before 2014 version has never had this problem. Is this a known issue?

  THX

  It is a known problem with SOUL running on Yosemite. We are working with Apple on the issue and hope it will be fixed in a next OS update.

• I use Adobe Photoshop CC 2015 and it takes a long time to open... too long!  How can I allocate more memory to the program photoshop - I have a lot on the computer, but photoshop is a great program and needs more juice - need help!

  More memory to an application.

  Hello...

  Try not to have too many applications running at the same time, you use Photoshop. Freeing system resources.

  Adobe recommends up to 8 GB of RAM here > https://helpx.adobe.com/photoshop/system-requirements.html

  You can see how much memory is installed on your Mac by clicking on your Apple  menu then click on about this Mac, then make sure that the "View" tab is selected.

  The amount of RAM is installed on your Mac is noted here.

• programs to take a long time to open

  My programs are open to slow down, I just cleaned the disc?

  Hello

  1. have you made no hardware/software changes before the show?

  2. what platform of Windows are you using (Windows 7, Windows Vista, Windows XP)?

  Method 1:

  Start the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Optimize Windows 7 for better performance http://Windows.Microsoft.com/en-AU/Windows7/optimize-Windows-7-for-better-performance

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  It could be useful!

• Microsoft keyboard takes a long time to open the Favorites

  I have a Microsoft ergonomic Natural Keyboard 4000, it works great but there is this problem that I can not get rid.

  all keys work properly, same custom and all functions, but the shortcut 5 Favorites buttons on top that I attributed to 5 different sites:

  1 http://www.google.com
  2 http://www.youtube.com
  3. http://www.facebook.com
  4 http://www.outlook.com
  5 http://www.twitter.com

  So, there is nothing strange there.

  When I press a button, I expect to open the default browser and load the Web page.

  When the computer is idle, it takes about one or two seconds to occur.
  With several programs, it takes 10 seconds to 2 minutes.
  When computer heavy load, it will do nothing.

  I thought it might be the web browser, hang up, but if I press a button, and nothing happens, I can open the browser manually and instantly appears.

  I have updated about 6 months of a Logitech Cordless Desktop comfort keyboard which has 4 keys shortcut and even at 100% cpu, these buttons work (still) not instantly as expected, if it's not my computer.

  IM using Microsoft Mouse and keyboard Center 2.0 for Windows 7, just after a clean reinstall.

  There could be a lot of causes for the behavior you describe, but start with the simpler:

  1. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle.

  2. right-click on the following link & select SAVE TARGET under... to download/save the file on your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [1]

  2. double-click the file that you saved in # 2 above & accept invites him to MERGE with the registry data.

  3. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 of => [ignore the warnings of DO NOT APPLY] & run the difficulty.

  Note: For best results, make sure the option Remove personal settings .

  4 restart once again & test those assigned buttons with Internet Explorer by default.

  Stop it!  Please do NOT affirm all other browsers by default yet!

  5. answer this post with a status report. Also tell me if IE8, IE9 or IE10 is installed.

  ==================================================
  [1] source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

• long time to open programs & executed safe start not

  Hello

  We have a laptop Dell Studio 1555 with windows vista for about 2 years now.
  Lately, he has taken a lot of time to connect and not all programs opens.
  He got about 5 times the BSOD with error F4 and when I boot in safe mode, it gets stuck on the cycdisk.sys.
  I looked on other forums and they said that it could be a virus but I have Kaspersky Internet Security 2012 and did a scan a few days before it all started, and no viruses were found.
  Also I tried to do a system restore, but he said that there is no system restore point.
  I don't really want to reload Vista back on it, because I have pictures on the PC I want to keep.
  Thanks in advance
  If you need more info, just ask
  1. There is a cut of the things that I can think of that might help.  I guess you are able to start windows. If this is not the case let me know.  These are very general measures that can be used in a fairly wide variety of situations, I hope that your

  Run a chkdsk command:

  Whenever windows is not closed correctly errors may occur in the hard drive.  These errors can cause degradation of performance

  1. Click Start, all programs, accessories
  2. Right click on command prompt Select run as administrator
  3. A uac prompt should appear select ok
  4. in the command line type Echo Y | chkdsk C: /f
  5. Hit enter and restart the pc, the chkdsk should run at startup

  It's an idea to run a chkdsk whenever windows is shut down inproperly.

  http://www.ehow.com/how_4967757_run-Chkdsk-utility-Vista.htmlgood

  Run the System File Checker

  System File Checker is a uitility command-line who research missing or corrupt system files and replaces them with well-known versions.

  1. Open the command line administrative as before
  2. in the command prompt, type SFC/scannow
  3. Hit enter and let run sfc, follow the instructions it gives

  http://support.Microsoft.com/kb/929833

  Run the next FixIt

  Microsoft provides FixIt to take care of common problems,

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  http://support.Microsoft.com/mats/Malware_Prevention/en-us

  Uninstall unnecessary programs

  over the years a bunch of useless stuff to install on our PC, many programs start with windows and can slow down the pc.  Remove them using Add Remove programs in Control Panel.

  A word about antivirus software:

  you have no antivirus software to protect your computer, but you want a single running antivirus software.  make sure that this is the case on your pc.  You say that you have installed a Kasperky.  You must make sure that windows defender is stopped. Also, make sure you don't have other antivirus installed or running.  If kasperky features of a firewall firewall windows must be turned off as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Good luck, I hope I have been of assistance,

  Chris

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it