Satelite U920T-100 - touchpad does not work after, sign in

Similar Questions

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• 350 laptop G1: Touchpad does not work after open the cover.

  Whenever I close the lid, when I open again the touchpad does not work.

  I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

  I solved my problem!

  I have unistaled the driver PS/2 Synapatics 19.0.12.95

  Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

• Z410 Touchpad does not work after upgrade to Windows 10

  Hello

  I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

  • I updated the driver with no luck to make it work.
  • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
  • In Device Manager it shows any missing material.
  • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

  Any tips?

  
  

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Satellite C50D-B-120 - buttons on the touchpad does not work after upgrade to win 10

  I just bought this new laptop. I have updated to Windows 8 Windows 10. Everything worked fine before the update. I am now active on Windows 10 and the mouse pad does not work. Initially, the entire mouse pad not working, I couldn't even move the mouse on the screen. I had a play around in the settings and have managed to get the work of the mouse, but now the button of mosuepad. I searched around the computer for the settings to solve this problem, but I had no luck.

  Please any help would be great, begin teaching and could do with getting this issue sorted.

  Thank you!

  You need to uninstall the driver for the touchpad (MOMENTUM or Synaptics)
  After that, restart the laptop...

  You can also try to update the driver in Device Manager... but the unit must be connected to the internet...

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• S7-392: touchpad does not work after you connect an external mouse

  I plugged my Logitech Performance Mouse MX my S7-392 yesterday and since then the touchpad doesn't work anymore, not even when I disconnect the mouse. I used another front (wired) mouse, and there is no problem with touchpad. I tried to reinstall the driver from the Elantech touchpad, which did not help. Also started Windows in safe mode, but the touchpad still does not work. I'm on Windows 8.1. Maybe somebody has the same problem?

  Hello...

  On the top row of the keyboard, thr wil b a button with the symbol 'a helping hand on the touchpad. Locate this button (probably the 7 key). Press and hold down the FN key and then press this button. This wud help.

  Hope it works...

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Duo 13 Touchpad does not work after the reactivation of hibernation

  In my 13 Duo running Windows 8.1, when I put on after his hibernation because of the battery, the Synaptics driver stops working and pilot generic Microsoft hid resumes (erratic behavior). I have to reboot to get it working again. I use the Synaptics 17.0.8.5 driver. The VT is enabled in the BIOS because I use VirtualBox extensively. Also, when I do ' shutdown/h' cmd and Hibernate manually, the touchpad works after I turn it on. This problem arises when it is low on battery power. Does anyone also have this symptom? I noticed Synaptics has released the most recent drivers, but Sony is not keep in touch with updates.