Satellie Pro A40: need driver Cardbus
I just bought a second hand A40 offshore from a friend who has managed to turn the wine around his machine.
She had lost the recovery CD, so I re-installed Windows directly from CD, download additional drivers from the support site.
However, I couldn't find a CardBus driver for my model. I searched high and low and even tried the drivers for A30, A60 and A80 etc in the hope that they are compatible, but unfortunately they are not.
Does anyone have a copy of this driver or know where I can download it?
I m not 100% sure, but as far as I know that you can not download explicit the cardbus driver.
Please do not forget that you have installed the drivers of Tosh in the right order.
Chipset utility at the beginning.
Also check if all MS OS updates has been installed
Have the Toshiba Satellite Pro A40.
The drop down selection options to specify in this model.
It is further complicated by upgrade this computer to Windows Vista Ultimate.
Looking for the good BIOS, ACPI, video drivers.
It is a Satellite Pro A40 and this laptop series doesn't support Vista. It s too old series.
Other drivers for Win XP and W2k are on the European driver Toshiba in archive page.
You might find in * Archives *-> Satellite Pro-> Satellite Pro A-> Satellite Pro A40
I need to for the Toshiba Satellite Pro 4340 * Sound Driver *, please!
System: Win Server 2003
Sound card: + Yamaha Native DS1 Audio Codec +.
(I'm loking on google but without suxes).
I put t know what OS you have, but all the available drivers are located on the European driver Toshiba page.
There is a zone of ARCHIVE. Looking at this place!
I'm trying to load a portable Satellite S200 with WinXP Pro.
It doesn't have a floppy drive and I have no idea how to access the BIOS or driver load in my WinXP custom disc so that I can load windows.
Please help as it is constantly with no hard drives have been found
You need the Intel Storage Manager. This package contains the SATA drivers to use the AHCI mode which has better performance than the compatible mode.
The drivers, you can integrate with nLite ([www.nliteos.com]). It of pretty easy to use and I have good experience with this tool.
If you have further questions, you can also read the discussions here in the forum because this procedure is on each identical laptop.
Please help me find the driver for HP LaserJET COLOR PRO 200 for MAC OXC 10.10 YOSEMITE
This should be what you need
Driver for OS X 10.9 Mavericks and OS X 10.10 Yosemite
I try to install on a PC with a clean 750 Gig drive Win7 Pro. It starts during a boot of the computer it starts on a CD. It is the Win7 Pro DVD .iso image.
It starts with the installation very well until I get a may appear indicating installation to a USB/DVD Driver needs and wants to get him.
The DVD is a Sony DRU810A. There is no driver for this DVD. In fact, on their website they stipulates expressly that he didn't need a driver. Now THAT?
Win7 32 bit. I also went to Sony and got on the live chat with them... the gal he says there isn't a newer version of the firmware that I have and to the extent where the driver, they use the standard XP driver and it didn't need a separate so driver...
I reminded Corp and they burned a new copy of the CD-DVD for me. Of course the download from the server just won't cut it. I read in some places that burn the CD at a speed too fast can be a problem. A person has recommended that burn at 4 x at 6 x speed. Another person said when they used an older DVD installation work, but with the new ROM disks, it would be a problem.
It sounds like back in the days XP where there are specific problems with hardware and software compatibilities for sure.
I should be able to simply insert the ROM and go, but that has not happened.
And they ask why I drink LOL
I installed win 98 is for my sp 4200 series laptop. Before the installation, I formatted the C drive. After installation, I discovered that the screen resolution is 640 x 480 (1024 x 768) and there were 16 colors. Windows won't let me edit these settings.
There must be a problem with the driver, right? Could someone tell me where I can find the right driver?
I couldn't find it on the site Toshiba´s. help!
I managed to find the drivers for Windows 98 on the site of Toshiba Canada:
On Toshiba Europe site, you will also find some drivers for the 42xx Satellite Pro series. I recommend checking out other laptops in this series that have the same graphics card, then use the graphic driver for this device.
I formatted my laptop and later tried to install the drivers from the Toshiba site. Network adapter is not installed correctly despite my efforts of many.
Tried the drivers but it does not work. I tried under the heading wireless drivers, but that does not work too.
If someone could help... thanx
Do you mean the LAN or WLAN card?
The device is listed in the device with the yellow exclamation point Manager? And what OS are you using?
What exactly happens if you try to install the driver?
Just a question: why you n t use the Toshiba Recovery disk? There are already all the drivers installed and after that the laptop is ready for use. :)
Hi, please help.
I just upgraded my laptop from Windows Vista 32 bit Vista 64-bit.
I managed to find all the drivers apart: the driver "Mass storage controller" (yellow exclamation in Device Manager).
I don't know where to look for this driver.
Any help would be appreciated. Al
I guess you didn't search in the forum for similar issues? Is this good?
I think that I m straight because I searched the forum and found that Toshiba FAQ doc.
+ No driver Windows XP for PCI Memory Controller +.
Here you can find this text passage:
After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * "Mass storage controller" * in Device Manager.
This unit is probably the module of Robson former Turbo Memory.
This material will be supported only by Windows Vista.
There is therefore no Windows XP driver.
Now, everything should be clear ;)
Can anyone help? I broke the left hinge on my A40. I can't find anywhere to get a replacement and I don't know where I can find the part No. so I don't know, I get the right one.
Does anyone not know the part. and where I can buy a hinge?
Replacing display hinges is not easy and kinda hard you must remove the entire screen, and I imagine that someone without experience could damage parts during disassembly procedure.
I recommend you contact the ASP for details and help.
The authorized service partner can also order the right and new hinges for this laptop directly from the head of Toshiba warehouse.
Good luck and best regards
My laptop has no analogue modem/fax. Because I have to send a fax, please send us factory and model * WIN7 driver compatibile * to send by fax.
To send a fax, the modem must be installed correctly and that's why you can find the driver on the Toshiba site:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
There you can download the modem for Windows 7 32 bit and Windows 7 64-bit driver. :)
Driver with Ms issues I´m 4200 laptop computer series with win 98. I managed to find the display driver, but the driver for pcmcia card is missing. And I can't connect to internet because im using for internet access Wlan pcmcia card.
I m writing this with my friends computer.
Could someone help me please?
AFAIK the PCMCIA port uses the common Windows drivers and so there is no driver PCMICA.
I recommend you to install SP all the updates for W98
In addition, you must enable the PCMCIA in the BIOS
This should help to solve this problem.
Whenever I turn on, it will take 15 minutes before you begin to use the lap top.
For example, I click on an icon on the desktop, nothing happens, if frustrating to wait for my lap top to warm up until I can do something, I must admit, it gets hot.
Hey you this oldie.
I think the best solution for you is to install WXP again using disc delivered facilities. Own pre-installed operating system will work well.
For best performance, I recommend you upgrade RAM to the maximum level. The modules of RAM memory for these old models of laptops are not more expensive.
And at the end I recommend you clean your laptop. I can imagine that this oldie is full of dust.
Does anyone know if a Toshiba DVD/CD-RW drive with model number SD-R2412 will be compatible with my Satellite Pro A40? If not, anyone know where I could find? Some muggins broke the CD drive on my laptop by bumping the case off a cargo cover. As a result, I can't claim on the warranty... statement of accidental damage... bah. :-(
A friend of mine, think the new drive can need CSEL or M/S setting... What is it exactly and I need for an A40 Pro Sat? The laptop model number is PSA45E - 0184H - EN
Sorry, but I can't tell you which model will fit your laptop because there is not a public document on this subject. I know that your drive is set up and if the warranty is still valid you should not o alone because you can lose your warranty. I also found information that your device may also use a DVD-R, - RW drive. These types of information have all authorized partners. Try to contact them. I'm sure they can give you correct information on this subject.
I am passing on a Satellite Pro A40 to a brother. It is in very good condition, but has slowed down over the years. I want to get rid of my data (I have on a new machine) and speed up the system by formatting the hard drive.
The machine didn't come with a disc for Windows XP, or a recovery CD (just a CD "tools and utilities"). I'm sure the drive HARD will be partitioned, and I can format the drive without such a disc.
If this is true, how should I do?
I can't believe that you do not have recovery media.
The laptop must be supplied with recovery CD, Tools & Utilities CD, and WinDVD.
But back to your question;
If you insert a new HARD disk, you will need to use the Toshiba Recovery CD or the original CD of Microsoft Windows to install the operating system.
The new drive is not partitioned HARD and doesn't have any OS pre-installed!
If you n t have the original CD of Microsoft OS you can contact the service provider allowed in your country and you can order it.
I hope I could help
Maybe you are looking for
First stop, I want to say that format TDM/PTM is really useful. It allows you to perform all sorts of things that would be a real pain if you've tried to do with spreadsheets, delimited by tabs. You can format data in spreadsheets excel for analysis
Hi all I am writing to the following problem (and I'm desperate enough): I have this laptop, which, in the last days sometimes not been started, giving rather beep errors. Today, it just does not start. Now, the weird thing is that it gives a long be
Hello Sorry if somone is asked this question before, but I was unable to find the answer or by mail. So here's the intro: Symthom: I installed and config with a 1240 AP G base still running the office to provide wireless connectivy, but users complai
When I try to convert the file, it says PDF maker files are missing. What can we do?
We are a school in Mac OS X 10.6 (Snow Leopard) with Rosetta to Photoshop CS.We would like to upgrade the operating system to a newer version, but we are unsure of our status as a license to this product.The person who held the access on behalf of Ad