Satellite 100-192: questions after the recent MS update...

Similar Questions

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• After the recent windows update August 16, 2012, my connection to Internet is not working...

  Hello

  I use a laptop HP Pavilion with Windows Vista. August 17, 2012, my connection Internet has stopped working. He was showing 'Local' only against the State of the connection, even if my cable internet and routers wireless work correctly. I have connected to the internet from another computer using Windows XP.

  After having tried many options to solve the problem of the internet for fews and realizing none of them solved my problem: (, I decided to restore the computer to the factory settings on August 19, 2012.) But to my surprise, system recommended to restore to an earlier date (before these recent automatic updates are made on August 16, 2012). I thought to try and to my surprise, my connection Internet started working :).  Which made me think that something that happens in the recent update that is causing my internet connection does not work.

  At the beginning I was in doubt, but now I'm fully convinced as next morning of day again my internet connection stopped working again. I checked Windows update history and realized again automatically updates performed on August 20, 2012. I restored my computer to the previous version before updates again and the Internet started working.

  Here's what I see in the history of the update for that day.

  Update of security suites for Microsoft Office 2007 (KB2596856)

  Cumulative security update for Internet Explorer 9 for Windows Vista Systems (KB2722913) based on x 64

  Update security for Windows Vista for x 64-based systems (KB2731847)

  Update security for Windows Vista for x 64-based systems (KB2712808)

  Update of security suites for Microsoft Office 2007 (KB2596615)

  Update security for Windows Vista for x 64-based systems (KB2705219)

  Windows x 64-August malicious software removal tool (KB890830) 2012

  Can anyone help answer more?

  -What day could cause this problem?

  -How can I just remove this one update which may cause a problem (I'd like to get the other automatic updates in the future, so don't want to disable the auto update)?

  The guys at Microsoft told me, problem is introduced by McAfee.  Here is the link for the solution to the problem.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

  I didn't try it myself, as my internet problem is automatically solved in a few days. I think that my version of McAfee must have automatically been updated, which may have solved the problem.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

  Hi, I had the system work perfectly without any problems until he informed me of the 4.1.15 updated. I went ahead with the update and now the backups are incomplete. It stops around folders starting with Mr. to make things worse, backups are reported as successful. I checked the old backups and they do not have a problem. Is it possible for me to go back to the old firmware update? I'm not sure than I had before but and I don't know how to find out who. Model: ReadyNAS NV + [X-RAID] Serial: 23J5127N0033D Firmware: RAIDiator 4.1.15 [1.00a043]

  Should he behave differently if you select Remote: Windows/NAS (Timestamp) ?

• After the recent Firefox updates prevent links to several websites to operate while it doesn't have this problem with other browsers - help please.

  Since a recent update of Firefox links to several Web sites is no longer working. They used to be fine and I liked Firefox. The problems do not exist with other browsers such as Internet Explorer, Google Chrome. Specifically, on talktalk.co.uk news links do not work, any more than those in 'my account '. On Barclays.co.uk the link to print my statement works no-same on MBNA.com
  There are several solutions proposed around the internet, but all are complex, so far none have worked and I don't see why I should have to make the suggested adjustments. Firefox has been great - now, it is not. The problem seems to be the update. Please help me get my Firefox where it should be.

  AFAICT then who are perfectly normal links on the news page

  The http://www.talktalk.co.uk/ opens if I click the guide Link TV/news on the https://sales.talktalk.co.uk/ page.

  If I right click on a link and use inspect element to open the Inspector then I see that there is an event onclick on the links (annex 'ev' button), so make sure that you are not blocking JavaScript.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• eBay does not not in firefox after the recent patch update shipment tracking

  on Ebay looking MYEBAY followed of package for purchases.
  Click the widow number thing open clock tracks follow-up and box remains empty
  works very well on MS internet explore
  running windows 8.1 latestest and firefox (autoupdate) on both.
  well operated until firefox did its last update.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then on clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Apple Watch don't pair after the recent software update

  I've just updated my software and now my iPhone and watch will not pair. Am I missing something?

  Hi Sam

  There is a difference between be unpaired and disconnection. When your watch dial a symbol of red phone with a line through it, it simply means that your Apple Watch has been disconnected from your iPhone:

  

  Disconnections can be normal. For example: your watch will be are disconnected from your iPhone if the devices are moved out of Bluetooth range or if your iPhone is turned off. If your watch is unable to connect to a Wi - Fi network known at the time (as a backup), it will be disconnected.

  The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect, try to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• I can't see the music on my iphone after the recent OS update. All I get is a screen that says music

  iPhone version 9.2.1 6 s more
  All I get is a screen that shows the music.

  Double click on the home button and drag the application to the top music. Then hold down the sleep/wake and the "home" button until the Apple logo appears. -AJ

• After the recent Lightroom update froze on will grow.  Try to remove the p0rogram through CC cloud I was unable to remove it.  Then I deleted the program through the operating program.  I could not download the Lightroom through

  Where should I go from here?

  You're on Mac or Windows and what version?

  You make a good uninstalll using the operating system, or remove the program folder?

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Computer Touchsmart 520: touchsmart 520 pc restarts after the recent update

  After a recent update to the stop, when I restart my computer, it crashes on the initial screen of blue with the hp logo. I hit the button esc several times to enter setup and nothing happens. What can I do to possibly enter safe mode and restore my system to the way it was before the recent update?

  Hi there @kencl65,

  That the Forums are with you!  I understand that you are unable to start your system correctly after a recent Windows Update.  I'm happy to give you a helping hand with this.

  Please see this document which has a process, you can follow this s cover the situation of departure and suspended at the HP Logo: HP - computer desktop PC won't start not (Windows 10.8), as well as covers of system restore and recovery.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Is it possible to restore the realization of streak of moving after the recent update of watch?

  Is it possible to restore the realization "streak more long movement" after the recent update of watch (v2.2)?   I had a streak of 44 moving goes when I updated the watch (04/04/16).  After the update, although I continue to exceed my goal of moving, I no longer get the prize for the longest series of moving.  Data are always available in the watch (I can see all complete circles).

  Hello

  While it may be that for any other achievements being credited, may be useful for the future allocation of achievements to close open applications on your iPhone and then restart your iPhone and your watch:

  • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
  • Both devices turn off together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
    • To reactivate: press and hold the side button until you see the Apple logo.

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports