Satellite 1000, Network Port

Im having trouble setting up my satellite 1000 as host on a network. It has a network port, but is not acknowleging that there is nothing plugged into it. I think I need to activate my network card, but have no idea how.
Can anyone help?

Hello

Are you sure that there is really a network card installed in your machine? On some models, there is a connector, but it is not connected to any network card.
Check the Device Manager if you are not sure.

BR
Tom

Tags: Toshiba

Similar Questions

  • Connection digital projector for laptop Satellite 1000

    I would like to help please by connecting my Satellite 1000 to
    a digital projector to make a Power Point presentation.
    I use other laptops to work and am quite familiar with the process. However, I could not the 1000 to work.
    I have connected using the blue monitor port and tried to select RGB using Fn + F5, but as a first step, nothing is displayed on the projection screen - no rocking. Finally, my laptop screen is displayed on the screen, but not on the laptop, which completely freezes.
    Any ideas would be very appreciated.

    Hello

    You must uninstall your display driver and download/install a new driver from
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    The Driver Downloads you will find all the drivers for your laptop

    Also check the comments
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3386&MessageID=10462#10462

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5531&MessageID=19777#19777

  • RV180 getting is not gigabit/1000 WAN port speed

    I have my RV180 connected to a modem Motorola SB6121 cable into the WAN port. The modem indicates that the connection to the router is only 10/100. If I plug my laptop directly into the cable modem, it indicates that the connection is full gigabit.

    RV180 configuration, less Networking > port management, the WAN (Internet) port is enabled and Full Duplex value and speed of 1000. Auto-negotiation and flow control are unchecked. I also changed the WAN port for auto-negotiation and restarted the RV180. But none of these settings seem to affect the speed detected on the modem end. He always shows a light orange Link that says 10/100Base-T, instead of a blue light of the link indicating full 1000Base-T.

    Am I missing another setting somewhere, or is there another reason why the modem insists that the connection to the router is only 10/100?

    If I plugged my laptop into the RV180 rouoter's WAN port, I do not see how that would be a proper test.

    Then two different cables do you use?  The reason why I ask because there are some cables Cat5/Cat6 "shonky" that are not properly completed.  If they are properly finished cables, you can obtain 1 Gbps.  If this isn't the case, you will get 100 Mbps.

  • iOS 10.0.1 "not allowed to use the restricted network port.

    I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

    Safari cannot open the page.

    The error was: "not allowed to use the restricted network port.

    On iOS 9.3 using Safari 9, the same URL opens fine without this error.

    Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

    I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

    It seems I was looking at the wrong source code.

    I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

    https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

    It seems port got 4190 recently added to the list of blockedPortList

    2306 2049, / / NFS
    220V 3659, / / apple-sasl / PasswordServer [addition of Apple]
    2308 4045, / / lockd
    2309 4190, / / ManageSieve [Apple adding]
    2310 6000, / / X 11
    2311 6665, / / alternate IRC [addition of Apple]
    2312 6666, / / alternate IRC [addition of Apple]
    2313 6667, / / standard IRC [addition of Apple]
    2314 6668, / / alternate IRC [addition of Apple]
    2315 6669, / / alternate IRC [addition of Apple]
    2316 invalidPortNumber, / / used to block all the invalid port numbers
    2317 };
    2318 const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);
  • Satellite 1000-Z2: cannot find operating system

    Hello

    I have a satellite 1000 Z2 with a windows xp operating system. When I turn on the computer, I get the message "cannot find the operating system". I tried using the recovery disk, but I get an error message saying that there is a mistake of partitioning, and it does not work. I watched utility recovery options to see if I can reformat the hard disk that you use this method, but I'm out of my League and don't know what do the options mean. Any help would be greatly appreciated.

    Thanks in advance

    Hi Dex

    I hate to be the bearer of bad news, but it means that your hard drive is broken or is a failure.

    If you have a bootable diskette that puts in the BACK, use it and see if it recognizes your hard C disc drive (or whatever your drive letter). If she sees it then do a DIR and see if your files are still there. If it does not find your hard drive chances are, there not.

    Good luck!

  • Disable the touchpad? Satellite 1000 Help!

    Hello

    I have a satellite 1000 and when typing I continues to catch the touchpad/mouse pad. How can I disable that I use a mouse usb anyway. Thank you very much
    GAV

    In my opinion, you can disable the touchpad in the Manager device or when you press Fn and F9!

    Good bye

    [Edited by: admin]

  • Update hard disk for Satellite 1000 z2

    I learned that I can only spend my hard drive Satellite 1000 to 20 GB. Please anyone know if that is correct? The laptop has a 6 GB at the moment.
    Thank you.

    Hello

    I found the information that your device supports 15 GB of HARD drive. Maybe it's the official statement from Toshiba, but that you will be lucky with 20 GB of HARD drive. Try it!

    Good bye

  • Satellite 1000-Z2 - replacement of the FL inverter

    Anyone know where there are instructions for the replacement of the FL on a Satellite 1000-Z2 inverter?

    Thanks for any help.

    @clublad82

    -I think that you can upgrade the memory to 512 MB max
    -On this unit 2 slots should be available.
    -CPU update is not possible

  • Tecra 8100: Don't know if the Network Port Replicator II is working properly

    I had a PA3017E-1PRP, i.e. a Network Port Replicator II, for my Tecra 8100. The fact is: I don't know if it works. I plug the computer in and no new material appears. At least the 3Com NETWORK adapter should be recognized, but no sign of life is presented at all.

    In addition, the USB ports does not work, but at least, the leds of the watch of the computer there is come from there because they show that battery is charging and the power comes from the DC.

    So, how can I check that everything works correctly? The computer is Windows XP SP2 installed, and I installed all the drivers and the support of the utilities (common modules, mobile and other extensions) util Toshiba USA and Toshiba Configfree of Toshiba Asia...

    Hi Toka

    I really put t know why you install software mix on your device. In my opinion, you should install European tools and utilities if you live in Europe. But if everything works it is also OK. I just want to make this comment because I don't know if all tools can consort with each other.

    As much I know this unit only is not supported for Windows XP Home in Europe. If the US page has mobile extensions for Windows XP Home edition, I assume that it has been tested.

    You can use a ports from there or all of them are dead?

  • Satellite 1000-Z2: want to upgrade the RAM

    I have the above model, but I can't find any information on this subject on the Toshiba site. I want to upgrade the RAM, but the documentation with the machine that was purchased from PC World in 2001 does not contain details of the speed or the type of RAM to use.

    Can anyone help please?

    Hi George,.

    I think the Satellite 1000 came with two memory slots and was initially equipped with 256 MB of RAM. It is expandable to 512 MB total RAM.

    the following link contains the details of reference numbers and RAM options: -.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5392&ft=m&St=3

    Kind regards

  • Most recent need graphics driver for a Satellite 1000-Zx

    Hello

    I have a Satellite 1000-Zx which I recently rebuilt since the original CD (for various reasons...). I'm now getting occasional graphic problems which points me Intel of the site to get the latest pilot chart of Microsoft error report.

    However, as I recall I did it before and had problems with the driver advised by Intel, but was eventually done in the right direction by someone here, however I cannot now find the post or even remember my login ID (this is probably a couple of years).

    I have a M 82830 Chipset and am running driver version 6.13.1.2004 dated 02/15/02, can someone tell me what is the correct version for this machine?

    Thank you
    Eliot

    Hello Eliot

    You will be very happy if someone can give you some good information on this good old classic. I think you don't have a lot of choices there. Either you can use driver Toshiba designed, or search on the net for the latest.

    Video card on your laptop must be Intel 830 MG. Intel download page check and maybe you will find latest driver. Google around a bit and I am sure that you will find enough pages to download the latest version of the driver for this card for Windows XP Home edition.

    Good luck!

  • Satellite 1000-z2: where to buy a power supply?

    Hi guys, does anyone know where I can buy a straight plug for Toshiba Satellite 1000-z2, I tried so many sites, but they do not have my model.
    Please help me.

    Hello

    Check this site:
    http://www.dcpowerjackrepair.com/viewpart.php?id=73

    In addition, all supported and compatible parts, you can order at the service partner who is responsible for your country.

  • Satellite 1000-Z2 request graphics driver update

    Hello, I would like to know if it is better to have the performance of the computer if I'm updating the graphics card driver that is graphics controller Intel(r) 82830 M - 0 / 1. The laptop is satellite 1000 - Z2. If so, where I can downloard the latest driver, thank you for your help in advance.

    To get the latest driver for your machine, you must visit www.intel.com for more recent drivers since your graphic chipset made by intel.

    If they have newer drivers, so you may have better performance, but that is not guaranteed. :)

    Have a nice weekend

  • Satellite 1000-Z2: need Driver Modem PCI

    I'm looking for the driver PCI Modem, any idea where I can get one? Thanks in advance

    Have a look here on the Toshiba Europe driver page:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Here, you choose Archive-> Satellite Archive-> 10xx Satellite-> Satellite 1000 - Zx

    I hope I could help

  • Replacement of the CPU on my Satellite 1000-s158

    Hello from Russia! Sorry for the poor knowledge of English, the message is translated by the translator of the computer. With the greatest pleasure a few years that I use Toshiba Satellite 1000-s158.

    He is very happy with the purchase. Unfortunately, my income does not allow to get more modern notebook. If the replacement of the processor for this notebook on most recent processor is possible? And if so, on what model CPU? Grateful in advance. Yours faithfully, Andrey, Russia, Arkhangelsk

    Hello

    Unfortunately, it is not possible to change the processor of your laptop. Your motherboard is built in such a way that it is not possible.

    Best wishes

Maybe you are looking for

  • Some details on caching in firefox

    Basically, I want to have all the cache in RAM instead of my SSD.[I have disabled "disk cache", do I have to disable 'hide offline' too?]1 setting browser.cache.memory.capacity - 1, I noticed that he was staring at 32768 KB. Would it automatically in

  • Why aren't my keys PgUp and PgDn working properly?

    Today, after an update of the browser, I find my PgUp and PgDn keys no longer work to scroll my page. Somehow they have become related to being backward between pages, with in return PgUp and PgDn being forward and therefore no sensitive on the pages

  • Several libraries of photos?

    I have been using iPhoto for many years. A few years ago, I broke my a giant library in separate for each year.  It was a tedious process but was well worth because iPhoto has been so bogged down with the size of the library.  I realize in iPhoto is

  • HP b110 printer range, try to print I got the following message: "failure ink system - error 0xc19a0003.

    I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original H

  • System Restore does not properly!

    I clicked on the system restore and received the following messages;  "SYSTEM RESTORE DOESN'T SEEM TO WORK CORRECTLY ON THIS SYSTEM.   and "a VOLUME SHADOW COPY SERVICE COMPONENT ENCOUNTERED YEAR ERROR INATTENDUE.»  CHECK THE LOG OF THE APPLICATIONS