Satellite 1100 Z6 display problems

Hello

I have a Satellite 1100 Z6 and the screen does not appear correctly. It seems to show what I can only describe as a low resolution image.

I instslled the last card (downloaded at Toshiba) Intel graphics driver and my settings are 1024 x 768 at 60 Hz and I have tried tweeking the settings but without success.

I believe that the cause is due to an incorrect display driver and not the graphics driver that my display driver shows as a standard 'Digital Flat Panel' under hardware devices. I tried several drivers display different but once again with no luck.

Anyone have any suggestions on how to fix this?

Hello

Sorry, but I don't see any problem here. Your device has 14.1 "TFT color display. The resolution is 1024 x 768. If this resolution is shown, that there is no problem at all.

Tags: Toshiba

Similar Questions

  • Satellite M40X Screen Display problem

    My Satellite M40X has a black vertical line which occupies 20% of the screen on the left side. The rest of the screen shows a full view. Change the display settings makes no difference, and there is no mention of this error in the manual. You don't know whether a problem with the LCD screen or a problem with the adapter and drivers. Wanted to check if someone has experienced something similar and can advise you.

    Hello

    Check using an external monitor.

    If the same vertical line would be seen on the external monitor, an internal graphics card problem may be possible
    In this case replace the defective

    Since the GPU is a part of the mobo, you need to replace the motherboard that can be a costly affair

  • Satellite M115-S1061 - display problem - bad colors

    According to my daughter, his portable Satellite under XP - SP2 suddenly went dim. At first I thought that it would be the backlight inverter, so I got a replacement, but to change that did not make any improvement.

    Experiment with display settings it became apparent that a lot of the display of colors were not what they should have been and I started thinking about something had happened to the LCD screen or its wire causing the loss of one of the primary colors for example: Blue however, after restart I have observed a lot of blue in the diplay up to what fully loaded XP.

    Display themes and by setting to try to get a useable simple, it became more and more obvious that there is some type of ongoing video inversion.

    That said, I can't find any setting that could cause this or any similar report of this disease. I scanned for any viruses and returned only several points without results or imprivement of restoration.

    The driver has not been updated, so it there is no possibility of returning to a previous iteration and are looking for a update indicates the current dirver is the last.

    In addition, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly...
    It is not until the Office XP launch things go astray.

    Any help would be greatly appreciated that the school is in session, and I be get this resolved and getting a new laptop!

    TIA,
    Bob

    Hello

    > Also, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly... It is not until the Office XP launch things go astray.
    From your description, I think that this could be a graphics card problem.

    I would really recommend connecting an external monitor, second to this laptop to check if the same wrong colors would be visible on the external monitor.

    If the same bad colors will appear simultaneously on the second monitor then the question could be really related to a bad GPU chip

    In this case a replacement (motherboard) would be necessary

    Bye & welcome

  • Satellite M60-167: display problem

    Hello

    3 days ago, I bought a new Satellite M60-167. Now I have some problems with my screen, maybe it's broken. Whenever the screen resolution changes, I have a few white artifacts (looks like white stripes) in the upper right corner. If I have the black wallpaper there is a grey area that is dark at this angle. Now, I want to know if this is normal or my screen is broken and need to be changed.
    Please respond quickly!

    Post edited by: fabse

    Hello

    Although it is very difficult to say what may be the problem but I don t think that it s a normal question. It s a new laptop computer, and if you're not sure if it s a default display, or everything you need to bring this unit to your dealer. Check it out! It is perhaps necessary to replace the failover of the s display can get a new

    Good bye

  • Satellite P10 832: display problem

    Hi everibody, this is my first post in this forum.

    I have a very annoying problem on the portable computer P10 I bought 6 months ago.

    Since a few days the flickering of horizontal lines appear on the screen: for example when a white window appears on a black background, pink flickering lines appear on the left of the white window.

    Can anyone help?

    Hello

    you did it a day display driver again?
    Look at https://eu.computers.toshiba-europe.com under Download driver for a new driver!

    If you have a hardware problem go to a Toshiba Service partner, they can help you!

    Try and keep us informed!
    Hans

  • Satellite Pro 4600: display problem

    The laptop overheated (for the previous owner). When I bought it all was going well, but after 2 days (not more), the screen started showing artifacts many and varied, beginning with the Toshiba start screen.

    Can it be cured without changing the motherboard or a Toshiba scored another goal by integrating everything?

    You bought a second hand unit?
    I'm afraid, it seems that you have bought a laptop with the hardware malfunction m

    Well, I think the problem is the graphics card. This could be a previous result of overheating
    But have you tried to connect the laptop to the external display?

    In this case, you can check if the same problems appear on the external display.
    If yes--> the graphics card to the Board of Directors must be corrupted
    If not-> there could be something wrong with the screen of the laptop or part of the screen

  • Satellite L40 - A - display problems

    Problem LCD screen according to me pls help... got images tnx

    To, looks as the hardware malfunction of display...

    The same symptoms are visible on the external screen?

  • Re: Satellite L500-1XL - display problem after BIOS update

    Hello!

    I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
    The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

    Any ideas what could cause the problem?

    Thank you

    Can you please make a picture how he looks in and post here?
    2.10 is the right version and I really put t understand what is the problem.

    Toshiba welcome screen appears as usual?

  • The satellite M60 display problems

    Hello

    I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
    When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
    Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

    I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

    Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

    I am quite convinced it's a driver issue, but then again, nothing is certain.

    If anyone can help me please I'm getting desperate.

    Hello

    Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
    In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

    However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

    Second, if video playback is erratic, it seems that the OS is fully committed.
    In this case, you should check the processes that run in the background of the operating system.
    In addition, try to defragment the HARD disk

    Good bye

  • Graphics/display problem - Satellite M60-105

    I'm having a little problem with the display (or graphics). In some programs of CAD (Inventor, Solid Works) 3D solids are displayed with lines that normally are not displayed. "I see the solid. In the games like Doom3, I see only a chequer (Exchequer) with black, the blind, the tasks of rectangle. I tried to update the graphics driver, but the results were the same. Problem is more complex that I have thaught, because I noticed the same problem after formatting HD and mounting of Toshiba Recovery CD. Also, I noticed the same thing happens when I'm trying to change something in the BIOS. Maby some of you have had a problem like this, please help.

    Hello

    Believe me on this path is not easy to say what may be the problem. The explanation of your problem is good, but it will be interesting to see what you mean exactly.

    One of my friends has M60 and I didn't see any display problem on his unit. If the unit is installed with recovery media that produced with other applications, watch DVDs or simply with 3D CAD program?

    It will also be interesting to know what you exactly changed in the BIOS.

  • Satellite 1100: Excel keeps freezing - too low virtual memory

    I have a satellite 1100. My Microsort Excel program keeps freezing (mainly when I print or you are trying to save) and then tells me to stop.

    So, I also have a message icon telling me that I am low on virtual memory. Microsoft stop related to memory being low?

    How can I increase the memory? Or do I just need a new laptop! Help, please.

    Hello

    Satellite 1100 is really an old classic, but he should be able to use common desktop applications such as Word or Excel with no problems
    Virtual memory also known under the name a paging file is a file on your disk (default C:\pagefile.sys) than Windows applications and use more physical memory (RAM) according to your needs. The default and the recommended of pagefile.sys size is 1.5 times the amount of physical memory. Virtual memory is the amount of physical memory and the pagefile. So, if your computer has 512 MB of RAM, there is a page file 768 MB by default, for a total of 1.25 GB of physical + virtual memory.

    So what to do in your case? Generally, the RAM upgrade should solve this problem. You can also try to increase the size of the pagefile.sys.
    This can be done in system-> tab advanced properties-> Performance settings-> advanced-> virtual memory change tab.

    After the change of virtual memory, you have to restart the laptop again.
    If this will not help then an upgrade of RAM would be required or a new laptop effective ;)

  • Display problem on my A60 Pro Sat

    The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

    Hello, Robert

    Have you changed anything on your device or this occurs suddenly display problem?

    I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

    If there is some serious hardware issue please let us know.

    Good bye

  • Satellite L350 - strange screen problem (contrast is gone)

    Has anyone met on Toshiba Satellite L350 - 14f (PSLD0E-00v01men) a display problem where looks contrast went?

    Is this a common fault so that it works well on screen/TFT external?

    I checked gamma, even started in safe mode and used a standard VGA driver.

    Stand by.
    Since when you noticed this problem? On the first day?
    It is not easy to understand exactly what is happening.
    Can you do peak, transfer to http://imageshack.us/ and send the link?

  • Satellite 2410-303-display flashing, update the BIOS

    HY!

    I am the owner of the Satellite 2410-303 series. Display does not work very well. I do not know it is because of drivers (even me, I installed the drivers by default) or maybe it's because the LCD screen. Maybe poor contact or something like that? I don't want to take my turn for the service center more because they don't know how to solve the problem. Only what they say is: «I'm sorry, but you have to buy a new...» »

    In speaking of the bios it is 1.20 in 2002. I want to download 1.40 (think it's most recent) but do not know where to download... Please help because this is my first tour & I want to revive his soul... THX.

    Hello

    I always thought that this forum is serious, but you try to make us laugh reading your ad.

    Sorry, but your comment about service is for me really ridiculous. Do you really think that all the issues can be fixed and nothing should be exchanged? I respect your opinion, but I think you're not qualified to talk about. Or maybe you're a technician material. If so, then I feel sorry for my comment.

    Anyway, if you have a display problem trying to connect to external monitor and see exactly what is happening. It will be interesting to know how starts flickering.

  • Satellite 1100 Z3: enable LAN port

    can someone tell me if the lan port at the back of the laptop (satellite 1100 z3) can be activated
    Thank you

    [Edited by: admin October 22 05 18:41]

    Hello

    as far as I know that the Z3 Satellite 1100 is not a network card.

    But normally, if the network driver is installed correctly and that the network card is not a problem, simply create a connection to the local network. The LAN port needs to be activated separately.

    Good bye

Maybe you are looking for

  • No way to disable an unwanted 'characteristic'?

    I find the location of the calendar line a convenient place to enter the mileage of departure for appointments. Calendar, however, lost time trying to turn this into an address. Is it possible to disable this "feature" undesirable?

  • Need help to create a new Xbox account

    I deleted my Xbox Live account, a long time ago and I want to create a new. My old Xbox Live account is associated to my the Microsoft Account. But when I want to create an Xbox Live account, it says I have one using my that already have Microsoft Ac

  • My HPC :) Memory status

    Out of 456 earned I won only 366 left. About 67G. B is used. Where is the rest?

  • Microsoft Project Professional 2007

    I would like to know if there are problems with Project Professional 2007 running on Vista Ultimate 64?

  • FastMail contacts access blackBerry 10 using Mac OS x Server

    Hello community, I configured my Z10 (OS 10.3.2.2474) to access my contacts FastMail using Mac OS x Server. The contacts are downloaded to my phone and I can view, edit, and delete. All changes are synchronized with the FastMail server. I only have a