Satellite 1410-354, a Wifi connection 1 MB/s only: why?

My satellite 1410 354 (Wifi) 'ready' undder XP Pro accepts a PCCard Wifi, everything is OK, except the speed of the connection limited to 1 (one) Mbps, instead of 11. Even at 1 meter from the access point, even with the settings configured to Auto 802.11 mode, same with the other laptop with the same Wifi card to 11 Mbps, there is 1 MB/s.
Is there a special driver / activation use to free bandwidth wifi?

Hello
do you mean a PCMCIA card, which allows you to connect to an Access Point?

Or what type of card Wifi that you use?

Please give us more information

THX

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro NB10 limited wifi connection

    I use Satellite NB10 Pro with version 1.20 of the BIOS and windows 64-bit of 8.1. I have trouble with several times the limited wifi connection. When I remove the driver and reinstall it, it works again. Pilot already updated, but keeps same problem. Tried several Satellite Pro NB10 same problem. Any suggestions?

    For most of the WLan connectivity issues are related to the IP attribute the problems.
    Usually the IP address is assigned automatically using DHCP service.

    In case this question would appear once again, you can try to refresh the IP address.
    Start the console (black DOS window) using the command: CMD (type CMD in search)
    Then use the command: ipconfig / renew

    If this question would never happen again, I recommend you to reset the WLan router.

  • Satellite A300 - give up WIFI connection

    I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
    It's only recently, in the last 2 weeks and I did not install new software that can do this.

    I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
    I use a secure connection which needs a wep key and is compatible with Windows Vista.

    I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
    I have only 2 related both objects and they are not even in the same place or even near each other...

    When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
    If I plug the ethernet cable then everything works fine.

    Very puzzled as to why this happens, having run checks virus on computers and nothing.
    Uninstalling the connectivity doctor, still no joy.
    All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

    Can someone help, I'm not very technical and am now very mentally drained

    Thank you

    Hello!

    First of all, you must update your WLAN driver. You can find it on the Toshiba site:
    http://APS2.toshiba-tro.de/WLAN/

    He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
    In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Good bye

  • Satellite C50-B16T - slow WiFi connection using battery power

    Hello

    I have a new Satellite C50-B16T and discovered that when I take it off the power, wifi is slowing down as HELL, to the point that I can't even use it and have to connect it to the power.

    I saw a few solutions on a TX adjustment, but my Satellite actually doesn't have this option, and if this is the case, I don't know how to find it and why it is happening.
    Would really appreciate if anyone has any suggestions, since my laptop is now essentially a desktop all the time, which makes its pretty useless goal...

    Go to-> WLan card device manager-> properties-> tab power management

    Here, uncheck the option that allows the system to disable or control the unit in order to save energy.

    Also check the tab 'Advanced' for possible energy saving options.

  • No satellite L750D-IDM no WiFi connection possible

    Hello.

    My wireless connection has dropped suddenly dead yesterday.
    He said that the atheros wireless network adapter works perfectly, but my wireless is disabled. support tells me that I have to turn it on, the adapter, but he didn't tell me where.

    really need your help, thank you.

    > He says the atheros wireless network adapter works perfectly but my wireless is disabled. support tells me that I have to turn it on, the adapter, but he didn't tell me where.

    I assume that you have the Windows 7 system preinstalled on this laptop and you don't alter the configuration of the system. Usually, if you get the notification that communication is turned off, the ignition is very easy.
    You must use the function keys to activate the Wlan.

    As I m trunk not on l750 satellite laptop WLan can only be activated using the Fn + F8 keys

    I recommend that you check this!

  • Satellite L670 - using a WiFi connection is not my own

    Using the Satellite L670 with windows 7 32 bit. Australia

    I use my neighbors wireless because I lost my connection to the local network. I don't have a paid Wi - Fi connection

    I have been in contact with my ISP Distributor and the modem. I can see myself as th e local area Connection is not on my computer. I did a system restore and it did not help. Obviously because it is a question of Toshiba... I was told to ring Toshiba, but because it's the weekend they are not available.

    Is there anything that i can do - download soomething? If so it will download to my connection or my neighbor as it is concered, that will be the case.
    Can anyone help please?

    Thanks in advance

    Maybe it sounds silly now, but it is not easy to understand your ad. Sorry, but what is the main problem? LAN connectivity?

    If I understand you right, WLAN option on your laptop works fine.

  • Satellite C660 loses a wifi connection when unplugged from charger

    I have a problem with my C660, when the charger is connected wifi works well, however, when I unplug the charger wifi loses connection within 30 seconds. This happens every time. I've updated the BIOS and no difference.

    It's the second C660 with this problem when I bought the first laptop, that was happening, so I brought curries and they replaced the faulty laptop, however, the same question with the second unit.

    We have 3 other laptops in the House and this problem happen with others, if this isn't a problem with my router.

    Forum search function and read some threads in the forum WiFi category could help you find the solution ;)

    Check this box:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59379&TSTART=0

  • Satellite U500 - no automatic WIFI connection

    Hello

    I have a Satellite U500 with Windows 7 Pro installed. I've got also a Netgear Wireless Cable Modem (CVG824g v3) and ESET Smart Security Suite installed.

    Almost in each time after starting the laptop, it is not connected to internet. The network in the taskbar icon indicates that there is a connection limited to my wireless network. I have to go through the troubleshooter in Windows, where it says that "there could be a problem with the driver for the Wireless Network Connection 2 card". Does not work well, sometimes through the steps in the resolution of the problems. In this case I have to disconnect the network, re - connect and it always works.

    Is there anything AI can do to prevent this?

    Thanks for any help.

    Hey Buddy,

    I must say I have never had such a problem, but maybe you need to update the WLAN driver. Portal Toshiba WLAN, you can download a more recent and pre-tested Toshiba:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, I would recommend updating the firmware on your router. Therefore, you should check the Netgear Homepage.

  • Satellite C660D - no automatic WIFI connection

    Hello

    I have a Satellite C660D. Whenever I turn on I have to manually connect to the wireless network. If I check the box "Connect automatically when this network is in range" he chooses but if I open the box a few minutes later, it is deselected. I have the drivers updated and turned off "allow the computer to turn off this device to save power".
    Would be grateful for any ideas.
    Dave

    Hey,.

    There are already some threads here in the forum about connectivity WLAn on satellite C660 and I would recommend checking these threads.

    What you have to do is update WLAN driver and turn off characteristic energy saving feature in Windows power management.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=61475
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=61187
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=61452

  • Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

    Hi there again!

    Now with a new and strange issue.

    We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

    Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

    Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

    A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

    I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

    I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

    At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

    "This Bios update adds functionality to your system.
    (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
    When the computer comes on, the BIOS is launched to perform various functions to start.)

    For more detailed updated information, please refer to Information update BIOS Toshiba"

    (you can find it here):

    [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

    Archives
    Satellite
    Satellite 14xx
    Satellite 1410 604
    PS141E

    Quite specific. Isn't?)

    According to the information in this Web site, the available BIOS fits the following models:

    "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

    Yes... it's here!

    Now when you go into the "Toshiba BIOS update information", you get:

    "Ref. FAQ: TRO0000000b07.

    A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

    Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

    Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

    "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

    This should trigger yellow alarms in our minds.

    + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

    And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

    So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

    As reported by the update program, the system would restart. And in fact he did.

    Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

    {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

    OMG! I never movement something SO bad. 3-1-1!

    And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

    He never came again to life. He's still 3-1-1 beep.

    But now comes the investigation on the human factors involved in this accident.

    I found I committed the following errors:

    * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

    * (2) * I cross checked deep enough (until it was already too late).

    * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

    * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

    * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

    Then I began the most interesting part of the investigation.

    {color: #0000ff} * "what went wrong?" * {color}

    Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

    First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

    And I found something... VERY interesting:

    Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
    These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

    GOOD! Or not?

    Let's take a look:

    First thing I did was download all four files.

    Then I took the same version that made the accident: 1.40

    I unzipped the file, which I found:

    2009-06-05 00:17 < DIR >.
    2009-06-05 00:17 < DIR >...
    31/01/2003 08:38 11410v14.iso 1 605 632
    31/01/2003 08:38 511 764 14 1370. EXE
    {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
    01/09/2003 09:32 250 663 biofca9t.com
    10/08/2002 05:26 30 697 chgbiosa.exe
    31/01/2003 08:36 1 087 instinfo.bat
    2002-05-13 15:25 378 175 launcher.exe
    31/01/2003 08:36 433 launcher.ini
    2009-06-05 00:17 0 list.txt
    31/01/2003 08:36 14 768 readme.com
    * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
    11 archivos 3 530 212 bytes
    3 dirs 9,404,600,320 bytes free

    And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

    So I went the readme.txt and I found this:

    'README. CDC TXT 31/01/2003
    Flash BIOS version 1.40 for Satellite 1410
    -----
    This BIOS is applicable for the following models:

    Satellite 1410-S105
    Satellite 1410-S106
    Satellite 1410-S173
    Satellite 1410-S174
    Satellite 1410-S175
    Satellite 1410-S176
    Satellite 1415-S105
    Satellite 1415-S106
    Satellite 1415-S115
    Satellite 1415-S173
    Satellite 1415-S174
    Satellite 1415-S175
    Satellite 1415-S176
    Satellite 2410-S203
    Satellite 2410-S204.

    Please note that the model 1410-604 is * NOT * listed.

    I thought ' well, there must be another archive... ". »

    But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

    {color: #0000ff} * 2410A9V140. EXE * {color}

    So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

    * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

    So I once again, uncompressed to find:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\2410A9v140

    2009-06-05 00:43 < DIR >.
    2009-06-05 00:43 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,793,984 bytes free

    No readme file...

    Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

    This:

    El volumen of the D unidad no tiene etiqueta.
    El n£ series volumen del mero are: 8838-E175

    Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

    2009-06-05 00:46 < DIR >.
    2009-06-05 00:46 < DIR >...
    * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
    2002-07-17 03:38 biosupd2.ini 35
    13/07/2001 13:22 6 277 chgbios2.vxd
    * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
    11/09/2001 09:14 134 clean2.reg
    2002-07-17 03:35 342 064 install2.exe
    2002-07-16 06:55 241 664 nchgbios2.exe
    18/08/2001 11:41 3 435 nchgbios2.sys
    23/10/2001 18:55 11 476 nchgbios2NT.sys
    26/08/2001 09:00 49 152 nchgbios2svc.exe
    13/07/2001-17:05 49 152 tbdecode.dll
    2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
    2002-06-21 11:25 1 796 tosclean2.bat
    11/09/2001 12:01 967 tosclean2.pif
    2002-06-21 11:34 toscleanAUTO2.bat 1 841
    2002-06-21 11:44 toscleanSMS2.bat 1 796
    2002-06-21 08:51 2 038 tosntclean2.bat
    2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
    2002-06-21 08:52 2 038 tosntcleanSMS2.bat
    Archivos of 20 bytes, 1 046 461
    2 dirs 9,402,781,696 bytes free

    * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

    And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

    (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

    The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

    In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

    Thanks for reading so far.

    Now, what I need is to get ideas on a work around for this, my ideas are:

    (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

    (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

    (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

    (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

    Wwwaaaaoooowww... what a falks long post! Sorry about that!

    Forgive me, but I wanted to be really clear.

    Someone give some tips or advice will be greatly appreciated.

    Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

    Thank you once again, in advance, and sorry again.

    FenixDigital

    Post edited by: Fenix_D
    Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

    Hi Fenix,

    Wow... He tooked a lot of time to read your post...

    Maybe I can help you.

    The Bios in the website is the right one. If you have downloaded the right version of the Bios.

    Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
    This should be the reason, why does not the readme file contain the European model.

    I'll try to do an update of the fresh Bios using the update of the traditional Bios.

    Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
    After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

    If your laptop does not power perhaps the most, the RAM is default?

    Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

    I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

    The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

    Best regards

    Maurice

  • Unable to connect to my wifi connection

    I have a laptop hp envy m6. The problem is I have 2 wifi connections, but the laptop only take one. My Twc provider said connections are good, so it must be my computer laptop anyone can help me with a few solutions

    Honestly, I don't know if it's my laptop or the fact that I went on and install windows than 8.1 so any help would be welcome

    Hello darioblanco82,

    It seems that you have two networks, the laptop is picking up one and not the other. I will try to help you with this.

    If you connect to one of the two wireless, this indicates that this network card works. You see other networks, neighbors ect? There could be a distance factor.

    Troubleshooting wireless network and Internet (Windows 8) - this document may also be able to help on the problem you are experiencing.

    Please let me know how it goes.
    Thanks for posting on the HP Forums.

  • When I click on onknown icon wifi connections are checked with "connect automatically" why?

    the small icon 'wifi' on the taskbar of my laptop has six other House and wifi connections listed. I only know me. When I click the wifi icon, four of the six say "connect automatically". is it safe? Why it will remain unchecked in the box? concerned.

    Hi Lynne,

    This option is by design. The option "connect automatically" is always checked for any open network (such as a secure network) so that you do not manually connect (each time) if the laptop comes in the range of open network.

    If you do not automatically connect to an open network, then uncheck the option.

    If the option is checked, even if you do not want to connect to a network, there is no harm.

    If you have concerns, please let us know.

  • Satellite Pro A200 failing to connect with iphone via wifi hotspot

    My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

    I have a Satellite Pro A200 and had problems connecting to various wifi connections.
    The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

    The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

    Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

    Thanks for any help that anyone is able to give.

    > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

    This isn't a question of the age of the laptop
    As far as I know not that support all mobile operators
    You should first ask your mobile operator if you can use the tethering service.

    If this would be supported in my mobile operator, then connect the iphone to the laptop first
    So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

    (PS: as far I know to attach is supported by iOS3.0 and higher)

    After that the iphone was connected to the laptop, you must activate the tethering on iphone.
    Under settings of-> network, you should see the option internet tethering it must be enabled.
    Now you should be able to see that in the Network & Center sharing control panel.

  • Satellite NB10T - A - Wifi connection limited running Windows 8

    Hello

    So I got a new NB10T-A Satellite with windows 8 and have problems with wifi connectivity.

    It says I'm connected but the connection is limited.
    I know that's not my wifi because all other laptops and computers in the work of the House very well with windows 7 and proffessional ect.

    I tried almost everything, including troubleshooting, who comes up with the message: problem with access point or adapter without wire and/or invalid IP configuration.

    Any help would be greatly appreciated.

    I guess you don t know that win 8 happened and obsolete. The new 8.1 Win was published by Microsoft a few months ago and you could upgrade the Win 8 to 8.1 win free.

    For this I recommend you follow the instructions step by step for Toshiba
    [How update of Windows 8, Windows 8 | http://www.Toshiba.eu/innovation/Generic/windows8_1-Upgrade-stepbystep/]

    With regard to the Wlan.
    I think the Win 8.1 upgrade should solve your problem, but I think you should also remedy in new installation of the Wlan driver

  • Satellite L550D - WIFI connection stopped working

    Hello!

    Satellite L550D, WIN7, Realtek PCIe FE Family controller

    My wifi stopped working suddenly.
    Although my router works fine for 2 reasons
    > I am currently connected with an ethernet cable to the router
    > I have 2 Android tablets that are WIFI connected to the router

    I read a few threads.
    I understand that I must:
    1. uninstall/reinstall 'Toshiba Value Added Package.
    2 uninstall/reinstall "Support of Flash memory card utility"
    3. uninstall/reinstall "Realtek Wlan adapter"

    Please tell me more.
    1. my Ccleaner found 'Toshiba value added package "; I can uninstall it. Once discharged, how will I re - install the new version of PVAT?
    2. How will be the uninstall/reinstall "Support of Flash memory card utility"?
    3. How do I uninstall/reinstall "card utility technical support Flash?

    I'm sorry. It is obvious to you. I am only a user of PC; and it's not obvious to me.

    Thank you.
    Concerning

    Flamboyant

    Hello

    Before you begin to uninstall or reinstall some Toshiba firmware, I would like to know what Satellite L550D-xxx you exactly.

    The point is that different L550D models were equipped with a different wireless network cards.
    Not quite sure if your have a Realtek Wlan card. It looks like a Realtek LAN card.

    However, you must first check if the wireless network card is recognized correctly in the Device Manager.
    In the Manager of peripheral devices, network cards, you should see LAN and WLan card.
    In the case where the card WLan display correctly (no yellow exclamation) WLan driver installation is not necessary.

    In this case, you should go to the next step: check if you can enable / disable the wireless network adapter using the FN + F8 key combination.
    Where this is not possible, check if other keys FN function.
    Where other keys FN don t work, you must reinstall the software mentioned (Toshiba Value Package added, Flash cards).

    This can be done in the control panel-> programs & features
    After that the two software can be removed, clean the system using CCLeaner.
    Now, you can check the EU Toshiba driver page http://www.toshiba.eu/innovation/download_drivers_bios.jsp to download the software deleted.
    Installation is easy; Unzip the package and run the installation exe file

    Then you should be able to use the FN + F8
    After that the WiFi network has been successfully activated, go to the network & sharing Center-> manage wireless (left) and click Add to configure the new wireless network

Maybe you are looking for

  • Refresh regarded as harmful

    Howdy; I'm a bit frustrated at what has become a chore to 3 hours after to make the upgrade more formidable, it is for me - Firefox. I'll try to keep it civil. One of the things that has consumed a lot of my time is that I fell into the trap of "cool

  • How to get back the classic look

    I got FF 3.5 and it old to 6. I didn't like how it worked so I downloaded 5.01. I miss the classic look with the file menu at the top. Is there a way to get this back, or should I just downloaded 3.5 again.Thank you

  • HP Pavilion 1209sz g6: laptop does not turn on

    Hello My HP Pavilion g6-1209sz lights. When I press the power button, this will happen: -I can hear the computer start, but the fan won't move; -l' screen stays black -the led power button on and near the power adapter is turned on (white), the led o

  • How can I register for updates for windows 7

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem

  • Auto volume leveling audio playback

    It's really annoying: His sound is amplified to sound at a reasonable level. When a strong part of the song comes automatically to the grave level then produce audio quiet parts annoyingly loud & the annoyingly quiet strong part... Sorry it's the bes