Satellite 1640CDT lack of recovery boot disk

Hello
I'm trying to reinstall Win 98SE on a 1640CDT of friends old Satellite that is to come with a lot of errors when loading. I've got two product recovery CD Toshiba but not the product recovery startup disk that will contain all the batch files to load the cd in my opinion. I can create a workable Win98SE boot disk, but as it lacks the batch files to do anything with the CD it is not very useful. Any ideas where I could get Boot Recovery Disk of Tosh or other options to load the system back from the recovery cd?
Any assistance received with gratitude :)
Dave Chester

Hello

You must start the laptop with restore disc 1. If you have lost this disk, you can buy one from a Toshiba service partner.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L300D-222: "insert the boot disk and press any key".

    Hello

    My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

    I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

    Thanks in advance for any help!

    Hello

    He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
    But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
    If it s not recognized, then you need a new HARD drive.

    The recovery disc can be ordered here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite L770D-10J wouldn't boot - Disk Read Error

    Hello

    My laptop cannot start and it gives me the Error Message:
    Error reading a disc like the case, press ctrl + alt + delete.

    I did it a couple of times and I tried to solve this problem because I have no Win7 DVD to boot from, I tried to reset the BIOS to its standard options and now he wants a password for me.

    I was not even enter a so I won't know it.
    After 3 attempts the system stops and I have to restart my computer.

    Now, I have an external hard drive but I can't try to boot from it because my laptop wants that password.

    To enter the BIOS or menu I also need this password.
    I really need help, if you know anything please contact me with 'NOTEBOOKS TOSHIBA computers SUPPORT. My warranty ran out already.

    Sorry for the bad English is not my mother tongue.
    Thank you for helping me.

    I assume you mean the BIOS password.

    This BIOS password can be deleted by authorized service provider available in your country.
    I have no idea why a BIOS password is displayed if you have not defined it in the past, but it is impossible to delete this unknown password by common laptop user. The BIOS password is a very important security element, and only authorized individuals are able to remove it.

    Also Toshiba information here:
    http://APS2.toshiba-tro.de/KB0/FAQ35002I000IR01.htm

    Error reading the disk:
    I'm not quite sure what disc do you mean exactly, but where the installed system cannot start, I think that the HARD drive is faulty and must be replaced. After this replacement, you will need to reinstall the system. The best way to install the system is using the Toshiba Recovery disk because all drivers and tools Toshiba would be installed with the Windows System.

  • Satellite L300 - 20 d - recovery system disk backup is missing

    I have Norton Protection against viruses and when I backed up my laptop I saved the backup in the D drive which is partition backup drive...
    I want to factory reset the laptop but I can't do t it says can t find disk backup

    Is there a CD I can clean the laptop with... I think there must be something missing in the D drive backup.
    Can someone tell me how to sort plsss
    I have no backup disk and no CD came with the laptop that I lost.

    The history is somewhat confusing.

    Factory settings you can have on two different ways:
    -using the installation discs for recovery
    -with the help of HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    > I want to reset the laptop but I t this, as it says t find disk backup
    Can you please explain to us how you tried to reset the laptop to the factory settings and on how you got this message?

  • Satellite A30: Lack of recovery CD-> how to install XP?

    Hello

    I have a second hand Satellite A30, without recovery cd. Windows XP crashed completely. How install xp family without a recovery cd, an OEM cd does not work with the code on the sticker of the series.

    TIA,

    bjorri

    Hello

    A Toshiba Recovery CD can be ordered from the partner service allowed in your country and especially it s much cheaper than the original CD of Microsoft Windows.

  • Boot disk for Tecra 780 recovery DVD

    Please can you help me? I have a Tecra 780DVD. I need a product recovery boot disk (Win 95) as mine is corrupted. Disc Ref T #RB - EN - 20W95.

    Hello Rodger

    If you want to have a new product recovery disc, it can be ordered by the Toshiba service partner authorized in your country. Please contact them and see if they are able to order one for you. It's a good old classic and it is also possible that the CD cannot be stopped anymore.

    Good bye

  • Problem getting all the portable versions of firefox from 28 to start without error xpcom in DO PE 48 boot disk place at the start of the P-Start

    I built an emergency recovery boot disk using MAKE PE3 - 48 and P Start to enable the use of portable programs after booting into the recovery environment. I have used with success of Firefox Portable till and including version 28.

    All portable versions since then up to the last 35 Version will not start. All display the error could not load XPCOM.

    These same portable versions of Firefox, however, will begin in the normal environment of Windows 7 Ultimate on all my computers, however, in the environment of DOING PE 3, on the same device, they will not.

    You can ask about it in the support forum for Firefox Portable here:
    http://PortableApps.com/forums/support/firefox_portable

    Firefox Portable is a 3rd party application, not published by Mozilla. I installed it myself for dealing with changes in it and how it differs from the official version of Mozilla, but don't know enough about it or something DO PE 48 to be able to help you.

  • Satellite Pro A200: Recovery using a ghost network boot disk

    Hi all

    Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (hardware works fine under XP/Vista)

    I tried to boot from CD, Mem Stick and USB floppy with the drivers of toshiba and realtek without success, research on google seem to point to there needing to be a driver to interface with the cardbus / PCMCIA adapter - if it IS the case can anyone shed light on the fate of a pilot and how I could continue on this?

    Thank you very much
    GAV Shakespeare.

    Thanks for the clarification best regards

  • Satellite L750D boot issue no boot device - insert boot disk and press key nay

    Hi all!

    I just bought a brand new model of l7501N0 real satellite. I turn it on and "No. bootable device-insert boot disk and press nay button" I tried 3 discs of BONE, nothing. I also connected to the internet, nothing.
    Is is fundamentally flawed?
    Thanks for the replies!

    Please, enter the BIOS settings and set its default value. After this try to restart your laptop.

    The same result again?

  • How can satellite M50 - what is on the disk recovery - I run

    Hi, people, I have a Satellite M50 and a recovery disk, which is on the recovery disk? Y at - it windows Xp on it? Y at - it all the tools and utilities on it?, can I use it to reformat? How can I run?

    Thanks if you can answer

    On the Toshiba Recovery CD, you will find a picture of Toshiba!
    The image contains a Windows operating system, Toshiba drivers, tools, utilities, and additional programs like WinDVD, for example.
    Using the Toshiba Recovery CD is the easiest way to install the OS on the laptop and set the notebook to factory settings

    As said above the recovery CD will format the whole HARD drive. It would also be possible to erase the partitions! So be careful!

    If you want to install the operating system or run the recovery CD, you put it in the drive and the start of the player. The pressing the C button allows you to start from the CD/DVD drive

  • Satellite Pro 430 CDT - boot disk problems

    I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

    I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

    I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

    If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

    Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

    Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

    Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

    Will provide you with my e-mail address later if necessary.

    Thanx

    Steve Jones

    Hi Steve

    I found the information that the device was shipped with 10 x player XM - 1502-B.

    Check this box:
    http://www.cdrom-drivers.com/companies/1066.htm

    There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

    Good bye

  • I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

    I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

    Replace your hard drive.

    You have a backup of trust? If not, buy a disc of exterrnal for that as well.

    The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

  • Pavilion 6735 b: REPAIR Boot RESTORATION of HP Windows 7 Pro SP1 64 bit RECOVERY DVD disk

    I currently have Windows 7 32 bit on my HP laptop.  Will be 64-bit recovery HP and restore DVD Boot disk allow me to upgrade to Windows 7 64 bit?

    Hi @carlcomputer ,

    I saw your post about using the recovery of Windows 7 64 bit upgrade CD to 64 - bit from 32. As long as there is a CD of restoration for your model and your processor supports a 64-bit operating system, then you should be able to upgrade.

  • Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

    I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

    You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

    You start with a chkdsk/r from the XP Recovery Console.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • I need a floppy boot disk (recovery) for windows xp pro w/SP3

    Windows xp pro does not start until... It starts and a long error message then comes on the screen saying that windows ha closed due to an error during the installation of xp pro w / sp3 I forgot to click on Yes to a boot disk (recovery).  How to get an or after the operating system instaaling

    Hi ronfine,

    · What is the error message that you receive with the error code?

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

    For reference: how to get the installation discs for Windows XP for installation of boot floppies: http://support.microsoft.com/kb/310994

    How to install and use the Recovery Console in Windows XP: http://support.microsoft.com/kb/307654

Maybe you are looking for

  • in Lightroom color management

    I use Lightroom and mediocre results of my new iP8720 printer.  How can I turn off color management in the printer?

  • Change password on WAP54G

    I use a linksys WAP54G distribute throughout my house to my ISP router wireless is not wireless. I tried to change the password on WAP, but somehow I can't access using the default IP and the password. Unfortunately, I have reset the linksys and it n

  • DeskJet 5650 printing problems

    Good evening everyone, I have a Deskjet 5650 which do not print on the computer. When I click on 'Print' nothing happens - no flashing lights, no noise, no movement of cartridge nothing! I tried to print a page of test and configuration (now the powe

  • Windows 7 does not take into account swap file settings

    I have Windows 7 Professional 64 bit installed on a system with a mirrored system disk and two disks no mirroring, including a SSD drive which is configured with ReadyBoost. Because mirroring is to the integrity of the data, and has a performance cos

  • Shortcuts Windows opens the default program

    I don't know how it happened, but somehow my shortcuts of windows 7 that got ready to open Adobe Reader, instead serve as links to the program in the folder programs.  Can I change the default program that appears when the user clicks on a link by ri