Satellite 1730CDT, DVD burner replacement

Similar Questions

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Can activate a Satellite L40 DVD burner

  I recently bought a Satellite L40 (Vista Home) which came with a Pioneer DVD burner. The problem I have is that the player is currently disabled and that any attempt to activate the device fails.

  Can someone advise a solution because I can't use the drive as it is?
  Thanks in advance.

  What exactly do you mean by saying that the player is currently disabled?

  Have you checked the Device Manager and the status of the CD/DVD driver?
  Do you see yellow exclamation points?

  However, no matter if a yellow exclamation point appears or not, you should try to remove the CD/DVD drive device manager and must restart the laptop.
  Finally, the Windows operating system should recognize a new device and should reinstall the CD/DVD drive.

  Hope this short procedure will help you get the job of CD/DVD drive.

  I appreciate feedback ;) cheers

• A dvd burner replacement

  I have a HP Pavilion dv6-6c54nr, Windows 7 64 bit. I have some experience with desktop computers, but I've never opened a laptop.  My dvd burner has to be replaced, I am told that there will be instructions, if all goes well, they are good. Pointers? Thank you.

  It's your maintenance and service guide: http://h10032.www1.hp.com/ctg/Manual/c03099531.pdf

  Use it well!  It has detailed diagrams step by step instructions in case you get lost.

• Of Satellite A200 DVD burner does not work

  The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but when you try to read the disc, Virgin sound.

  Is anyone out there who has the same prob as me?

  need help...

  Try to use it with the Windows option. For data burning, you don't need additional software.
  Can you use the format option and clear the contents of the CD/DVD-R/RW?

• For Satellite A30 DVD burner

  Hello

  I am looking for information on the replacement of my CD - RW Drive with a DVD - RW in my satellite A30 - I tried to google for the info but I'm bad - I've seen some info on the following model: Samsung TS-L532, would - did it or if anyone can help this disc if there is and where you can buy of?

  Thank you

  Simon

  The following readers must be compatible with the Satellite A30:
  -Matsu * a CD-RW/DVD-ROM UJDA740,.
  DVD-RAM UJ-810,
  -DVD-ROM SR - 8177
  -TOSHIBA CD-RW/DVD SD-R2212,.
  -DVD-R/RW SD - R6012

  But every player that is compatible, you can order the Tosh ASP in your country.
  I think the guy order parts directly from the Toshiba neighborhood and you can be sure that the devices are supported 100%

• Satellite C850D - DVD burning problem

  Four months ago, I bought a laptop C850D - 12 L to replace my laptop computer another death.

  A couple of days, I tried to burn on a DVD jpg files; I had not done this before on the new machine.
  Everything seems fine until she reach the finishing process and the disk does not end.

  I tried to fire using Windows own engraving option, Nero and I even downloaded Ashampoo Burning Studio, but whenever I get the same results, i.e. nothing gets burned on a disc. I wasted 12 discs already try all variants of files, engraving, programs, etc., but each of them fails.

  I don't think it's the drive, I think it's a software problem, because * I am able to burn files to a CD *. The player plays also bought the DVD shop so that the part of okay - it's just finish burned DVD that is the problem.

  I downloaded a few programs that may have affected things, (Nero was already on the laptop when I bought it), they are: VLC player and DVD Styler - I downloaded them only that Windows 8 has no creation of DVD as Windows 7 programs don't.

  I phoned John Lewis, where I bought the PC, but they were not able to help, nor were Toshiba, who said it must be a software problem and asked me if I would like to speak to someone else for advice, even if it would cost me. seeing that I have a two year warranty on it, I refused.

  Drivers from the DVD were dated 2006 and a search inside the Device Manager said that these are the latest drivers.

  I went to the website of Toshiba and found a zip file driver, which has been updated in 2013. I downloaded which, to reveal the ten files, three of which are uncompressed application files. I tried to run all three of the latter with no apparent effect. I even tried to search these files when you try to update DVD drivers in Device Manager, but he acknowledged not all ten driver files (mentioned above), even though I copied these to a more convenient location in My Documents folder.

  I would be grateful for any suggestions as to how I can solve this problem.

  Best regards, Martin.

  > I don't think it's the drive, I think it's a software problem, because I am able to burn files to a CD.

  I think you use not entirely compatible DVD disks.
  It was my problem burning DVD disc.

  Recommend test you the discs DVD-R from different manufacturers but I had the best experience using R TDK and Verbatim DVD R

  PS: Windows system using common Microsoft CD/DVD driver. This is why there is no special driver for optical disc player sound is always part of the system.

• Satellite 5200 DVD burner

  Hello

  I want to change the cd Writer to a dvd/cd burner in my 5200
  My prefernd writer is the NEC 6500 is that possible or is it an endless story of a lot of trouble
  The writer before didn t UriPattern the original author, but I can live with it.
  Thanks for your help
  Thomas

  Hello

  I can't learn about the NEC 6500, I think you have to try.

  But I know that these discs for Toshiba work:
  DVD-R/RW drive of modular Bay PA3295E-1DV2
  Drive Toshiba Style Bay DVD RAM PA3219E-1DV1

  Good bye

• Satellite A80 - DVD burner does not

  Hi all

  I have a portable Satellite A80 two year old. I noticed that my laptop DVD - RW is not able to read a CD/DVD. Its not able to write either one! It gives just the error "D is not accessible. The request cannot be performed because of an i/o device error? "My DVD drive is dead or is there another problem? Also, when I put a CD in the drive, I can see the lamp LED flashes for awhile and then it stays in place.

  Thank you!!

  Shashank

  Hello

  At first please can you us the CD/DVD device status in Device Manager? When you start your laptop, press F12 and please tell me if the CD/DVD device is listed there.

• How to reset the BIOS to resolve a problem with Satellite P100 DVD burner

  Hello

  I'm trying to reset my cmos to solve a problem with my dvd writer.
  I tried to run an old game I own and which was protected by starforce and ran starforce nightmare with a made the device completely unusable.

  After much research, I heard to reset the cmos.
  I have treid through debugging and nothing happened. I really don't want to open the laptop and remove the cmos battery or leave it for a month until the battery runs.

  Y at - it advice on what I should do.

  Could you please put more details on the model of your laptop and you CD/DVD driver problem? This will be useful for other suggestions.

  To be honest I don t think any reset BIOS, the RCT battery remove, etc. is possible or could help you.
  Only the ASP would be able to remove the TCR battery (if necessary what I don t think), but would not reset the BIOS like on the desktop PC!

  I appreciate feedback

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Need replacement for M70 - 191 DVD burner.

  My DVD burner on my M70-191 (has my * a UJ-8415) refuses to recognize most CD and fails when you try to burn the DVD, with various errors. I've tried different types and different burning software. Re-installed, cleaned up by car drivers. No luck.

  So, I'm looking for a new drive... where can I buy a suitable replacement?

  Hello Steve

  First of all, I think you should buy the same drive. Doing this will allow you to possibly avoid compatibility problems. I have too many Satellite M70 and the optical disk drive is really good.

  I advise to use Google and you will find many online shops where you can order the new ODD.

• I can build in the Satellite Pro 4600 DVD burner?

  Hiya

  Can anyone help with this? Has anyone equipped with a DVD burner (dvd - rw drive Toshiba sd-r6252)?
  Which models are compatible? I'm good fight opening and Exchange.
  Compatibility just in fact know.
  Thank you

  Hello

  I put t found any information if this drive is compatible with the Satellite Pro 4600, but you should be careful to replace the drive.
  You should check the dimensions of the car. Very important is the drive (master, slave, csel) settings because it is not possible to change this settings as on the usual desktop drive.
  I'm not sure about the settings on the Satellite Pro 4600 but the ASP Toshiba should know that.
  You can also order the caught player supported by the Toshiba service partner in your country.