Satellite 1800-314 memory problem
Hey everybody.
I just bought an old Satellite 1800-314 (Cel 1.1 GHZ, 256 RAM, 16 MB graphics card) from my college and I tried
the parameters of this model using the AIDA 32 program.
To my surprise to read RAM showed only 148 Mbps - slower than the Pentium MMX 166 test and the writing of RAM showed only 51 MB/s-more slowly then K6 266.
Any applications, such as games (too old) works very slowly.
What can be a reason for this?
And what is DMI problem?
Thanks for help
Hello
There is the original memory built in Notepad?
Seems to be something with the RAM or the motherboard is wrong!
But it is very difficult to find a solution!
In my opinion, you should backup your data and do a restore. After the recovery of finishing procedure install a few different benchmarks and test if the RAM is now faster, isn't.
Campino Bye
Tags: Toshiba
Similar Questions
-
Satellite 1800-314: upgrade of memory and CPU
Hello everyone,
I'm interested in upgrading my old satellite 1800-314.
Does anyone know the upgrade of the maximum for this machine processor?
It does support only pc100 or pc133 memory modules?My idea is to upgrade from the origin to a Celeron 1.4 or even a Pentium III Coppermine Celeron 1.1 / Tualatin processor and add more 256 MB machine.
Thanks in advance,
André
Hello Andrew
Upgrading the CPU is not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.
Expansion memory is not a problem. You can use PC100 256 MB (PA3069U - 1 M 25) memory module.
Good bye
-
Satellite 1800-314 - what memory is taken in charge
I just got a Toshiba Satellite 1800-314 of the internet for Christmas from my daughter.
I installed the memory is 240 MB and I'm trying to source more that when you watch a DVD it vibrates.can someone tell me if pc133 ram is supported?
Thank you
Maybe this site would be useful
[Memory for Toshiba Satellite 1800-314 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=30683&ft=m&st=3]
According to this site, you can use the 512 MB SODIMM PC100 144 pins are supported
-
Satellite 1800-314-replacement of the CD-ROM disc
We have an old Toshiba Satellite 1800-314 the CD-ROM drive appears to be failing - it often will not recognize a CD, or run the applications of one.
First of all, the CD-ROM drive is not removable, so the laptop must be open. I'm familiar enough with opening, laptops, but in a hardware store or repair is not currently available, I thought I would ask if there is something to know, such as coins out of condition precedent, when I open the case?
I would also like to take this opportunity to replace the old CD with a DVD - ROM drive. But I read that there is a problem with a possible conflict of IDE bus:
[REPLACE CD-ROM DRIVE WITH DVD OF TOSHIBA SATELLITE 1800-314 | http://www.tomshardware.co.uk/forum/page-28372_20_0.html] (Their caps, not mine ;))Apart from "shorting pin 45 and 47" on the connector, there are other suggestions?
The laptop belongs to my little girl, who will give me + hell + if it is out of use for too long, or worse, break... X (so I would like to correct it at once.
Thanks in advance.
Hello
The fact is that each optical disc drive cannot be used on every laptop. you are right and there is nothing other than the compatibility issue. The assignment of pins is the same for all readers and ratings and because of this, you must use compatible discs only.
The good thing is that Toshiba has listed 6-disc compatible optical disc that can be used with this old Satellite notebook.
All of them are listed in the paper manuals user s. check it out. -
Utility Satellite 1800-314 installation material
I have a portable Satellite 1800-314. Some "distributor" has installed Windows XP Professional on, but it seems that he "forgot" to install the Toshiba Utilities.
Because of intractable suspend and wake-up problems, the client came to me and I do not find anything Toshiba utility.
The problem: sometimes the laptop suddenly stops working, the fan blows very strong windows unresponsive, turn laptop off with the powerbutton, but then you start over. Sometimes when you are lucky, it starts.
This problem sometimes also occur when the laptop is in mode 'sleep'.
I have already installed the powermanagement Toshiba but
I need to check the BIOS, only the Toshiba HW utility is not installed. I searched on the Toshiba site but I can not find this program for this laptop. Can someone help me?Thank you very much.
STAF
To access bios, you will need to press ESC at startup. Then, the computer will display "control system. Press
'.» Press F1 and the configuration of the system starts. BR
Michael -
Update the BIOS on a Satellite 1800-314
Hello
I have an old Satellite 1800-314 and I want an update of the BIOS. I did an update of the BIOS on my desk, but never on a laptop. Is there someone who could help me with a manual or something else?
Hi Antoni,
I also have a Sat 1800-314 and I could explain how to upgrade a BIOS.
The first step is to find your current version of the BIOS (in the HWsetup or look you in the BIOS, after turning on the power button, press and hold ESC and you will enter the BIOS), then the next step, go to the Toshiba site http://eu.computers.toshiba-europe.com, then click on support & downloads and go to the support home page and look if there is available as your latest BIOS version and download it.
If the preparation is done and you have to extract the zip file containing the upgrade of the BIOS on a 1.44 MB formatted floppy. Make sure that the PC is connected to the power adapter. Stop, and then turn on the PC. Press and hold the button depending on the layout of the keyboard is located right between the keys Alt Gr and INS pushed until a beep sounds and the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward,"will be displayed.
Place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin. When you're prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart", remove the disk and turn off the system and turn it on again to restart the PC.
BEWARE: Info-BIOS-Ce is only for a SATELLITE 1800 314!
I found this Information on the following site http://eu.computers.toshiba-europe.com when you go to the Support home page and click on the Knowledge Base. You will find a very good FAQ of the BIOS that contains all the various procedures of BIOS for Toshiba laptops.
Rudi Bye
-
DVD player for Satellite 1800-314 - which models are compatible?
Hi, I have a satellite 1800-314 with teac cd-224th-ba cd-rom drive and I need to change it with a dvd - rom drive.
the models that are compatible?
do you have any suggestions?
Thank you.Hello
If you want to buy a compatible player, please contact ASP. Here, you can order 100% compatible player.
-
Satellite 1800-314: when I close the lid it won't go in standby mode
I hope someone can help.
I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
I'm tired now.
Is there a simple solution that I'm missing?Grateful in advance for any help!
Hello
You know it's very important to install drivers in the correct order.
The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
If the energy saver has been installed on the operating system windows power settings will not work.
Toshiba crash parameters the parameters of Microsoft.In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
But be careful. You must use the good BIOS and the right procedure upgrades. -
AC adapter PA3283U-1ACA and Satellite 1800-314
A model of PA3283U-1ACA AC adapter is for use with a laptop S1800-314?
Bo SonnHello
I searched a bit on the internet and discovered the following models ca to be used with a Satellite 1800
PA3048E-1ACA 15V 4A
PA3083E-1ACA 15V 5A
PA3092U-1ACA 15V 4AGoodbye, Meier
-
satellite 1800-214 memory upgrade
Hello
Can someone tell me if the modules memory pc133 supports satellite 1800-214? I looked everywhere to find the specifications, but I can't find, even not in the manual.
Greetz
satelliteHello
the technical specifications. said that the Sat 1800 only supports RAM PC100 modules!
At https://eu.computers.toshiba-europe.com you can order:
PC100 256 MB (PA3069U - 1 M 25)
PC100 128 MB (PA3005U)
PC100 64 MB (PA3004U)Hans Bye
-
Satellite 1800-814 memory upgrade
I have a Satellite 1800 814 with 256 MB of RAM and have been looking for an upgrade of memory for a while. I used a critical technology for an upgrade of my old Packard Bell 6500 multimedia PC, but they could not help with my Satellite laptop.
I have now found an upgrade to 512 MB at Offtek, who seems to have a good range of Toshiba of refoulement (2 x 256 MB modules). See the site:-
http://www.offtek.co.UK/
Their site States that the max memory for the 1800-814 is 512 MB.
Anyone has any experience of Offtek updates before I shell out £131,16 Please? If I can count on the accuracy of their information and the reliability of their product?Kind regards
Hello
Looks like Offtek memory is right. And yes it's true 512 MB is the maximum that can use a Satellite 1800. But if your laptop is already 256 MB, you only need a 256 MB module.
Good bye
-
The SD-R2612B Combo drive is compatible with Satellite 1800-314
Please help with the following upgrade:
The SD-R2612B Combo drive is compatible with the 1800-314?
Is the version of the BIOS relevant?Hello
Sorry, but I think that this kind of information you can get from a partner Service. Contact with them. You can find Service partners authorized on
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good bye
-
Satellite L30 - 113 memory problem
I have a Satellite L30-113 that does not have the right
size of the memory.The system was shipped with 512 MB and 1 GB extra, I installed
Stick, but for some reason any windows reports only 896 MB installed and graphics card
use 128 MB. The BIOS also pointed out that only 896 MB of ram is installed.When I run the system information for windows it only detects 1 GB module
Although if I remove a memory module and have either 512 MB or 1 GB installed
It works very well.I also installed the latest version of the BIOS and does not seam to
have had no effect.Also the two sticks of memory were tested in another laptop, so I know that both work.
Are there problems with the mixture of sizes of memory in these laptops or to memory
Poles should be assorted sizes?The operating system is Windows XP Pro
* Excerpt from system information for windows
The value of property *.
* + Memory: + * summary
+ * Place: * + motherboard or motherboard
* + Maximum capacity: + * 1024 MB
+ * Memory: * + Slots 2
* + Error Correction +: * No.
* + Physical name: + * matrix memory
* + Operating system: + * memory
* + The device index: + * J501
+ * Capacity: * + 1024 MB
* + Memory + type: * DRAM
* + Width of data: + * 64-bit
* + Bank Label +: * channel B0
* + Form factor: + * DIMM
* + Total width: + * 64
* + Type Detail: + * synchronousThank you very much
Matt TyrrellI agree with Abe. I noticed a few comments about it in the forum, and it seems that the Satellite L30 should be upgraded with exactly the same modules.
I mean that the modules must support the same speed (MHz), the same manufacturer and so onFor me it s clear that other computers are able to manage these modules, but it seems as the can-do that L30!
-
Satellite Pro 4600 memory problem
What is the problem with this model? I bought second-hand laptop computer with 2 x 256 MB of RAM. After a few days memory module stops working (not recognized by the system), the next second module memory stops working. Problem is no slot, the two modules are defected some how. I bought memory as new ATC-SO815 AEC memory ten (www.memoryx.net), after one of the modules of memory stops working. BIOS is the latest Toshiba, version 2.60. Looks that mainboard burned some how the modules of memory, it's not good for me, I've already spent too much money for this laptop.
What's wrong??? Is there a solution for this situation?
I can't buy laptops and parts constantly, I don't have a lot of money.Post edited by: petar2258
Hello
How do you know that the problem is not associated with mainboard? I mean, you're a technician to know?
As your machine is really old and you got no warranty on it, try the following:
Install both modules of memory and make sure that the machine starts correctly.
Download the latest knoppix (linux live CD), burn it to a CD, boot from this CD and choose at the start of the 'memtest '.Let memtest run for a day. If memtest reports no errors with your memory (you can see if the modules are defective), then your motherboard is faulty.
So try this method and give feedback on your progress...
Welcome them
-
Satellite Pro A60 - memory problem?
I have a machine at 3 years which became progressively slower, especially at the start. I installed original specification and use the installed MS Firewall and Antivirus it.
Opportunities, with more than 1 window/application open, the screen freezes during use. On other occasions, I get an error message (something like) "Out of Memory Line 56", press OK and then displays the information.
I wonder if an upgrade memory will solve these problems? Thank you
Hmmm, you can simply test the memory using the freeware as Memtest86 +.
> was wondering if an upgrade memory will solve these problems?
Upgrade memory always improves the performance of laptops.
But the question is whether this problem is related to the fault memory or to of memory performance.
For me, it looks like a malfunction of memory.Try to remove a module, and check if the same error message using that one module of memory.
Maybe you are looking for
-
The AirPod will work with the iPod 5th generation?
Thank you.
-
Qosmio DX730 - 10K: no fullscreen is palpable
We bought a new Qosmio DX730 - 10K, but its touch screen seems to not work properly. There is an elliptical area in the center of the screen (about 10 centimeters in diameter) that is "dead".In this area without contact is being felt at all. any help
-
Bug report, created of notifications
Whenever I have unlock my phone, it displays a notification that Bug report was created. It is very annoying. Help, please
-
IdeaPad 14 "evolutionary Y700?
The Lenovo Ideapad Y700 discreet graphics AMD Radeon R9 M375 14 "is scalable? I would like to get more FPS.
-
Why can't I install sp3 on my computer? It such that I need the CD-ROM or the floppy disk
I try to update and I go through the express recommendation once the computer checks all updates He recommended that I use a CDROM or floppy to install service Pack 3, and I don't have the CD or the floppy disk.