Satellite 1800-400 does not start, or crashes after upgrading RAM

Similar Questions

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• Satellite C660-108 does not start with 8 GB of RAM

  I bought 2 x 4 GB memory modules to upgrade memory up to 8 GB.
  With 8 GB installed, the laptop does not start, but he will start with 6 GB installed.
  Modules 4 GB 6 GB configuration and wood East of 1.8.

  Any ideas?

  Hello

  According to the manual, this laptop can be upgraded up to 8 GB of RAM.

  Then you should be able to use the 2 x 4 GB RAM modules

  I think that both modules are not compatible with each other and therefore cannot boot up the laptop.

  You should test the laptop with the help of other modules.

• Dell Dimension does not start in Vista after upgrade

  A friend had a Dell Dimension E521 that won't start - has the missing file system\hal.dll.

  As there was nothing on this computer, he needed, I rebuilt it install a new copy of Windows XP, used the upgrade disc closed for upgrade to Vista and ensured everything in its original package has been installed. Let him install the Windows updates at night and in the morning, after a reboot it indicated that there is an update available. I've updated that and restarted and he said there are only four more updates that memory on the video card. I've updated those, but now it does not start at the top.

  I'm going through the boot process, but as soon as it is the screen black with the Microsoft Corporation and the (green?) bar he starts moving forward a very small amount, and then restarts. It comes up with the selection of Windows startup screen and I tried the secure boot and last good Configuration known without result.

  I tried the original XP disc to do a repair, but this doesn't seem to work with Vista?

  How can I recover a work computer or do I have to reinstall again?

  Thanks for any help, that all the world can offer.

  If you have installed Windows Vista good the first time that the hard drive should be fine however I would suggest running the Dell diagnostics just to be safe. To do this follow the instructions on page 405 of this document and perform extensive tests.

  http://philipyip.files.WordPress.com/2013/02/Windows-reinstallation-guide-02-02-2013.PDF

  What video card you have? Have you tried to remove the video card and running using the onboard video? Have you installed Service Pack 1 before the system drivers?

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

• Satellite Pro A200 - does not start with 4 GB of RAM

  Hello

  I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

  Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

  Hi caribman

  What Satellite Pro A200 you have exactly?

  I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

• Satellite 1800-712 does not start - DC IN flashes orange

  Hi all.

  My toshiba laptop Satellite s1800-712 has suddenly stopped working. Whenever I try to turn it on, I get the following blink code that repeats on the DC-IN power icon.

  The icon flashes orange in the following diagram. 1 short, 1 long, short 5, 1 x long. Anyone know what this means?

  If it helps, I use a TPA90DC APC travel power adapter PSU (as my original toshiba one broken. The APC unit is located at 15V.

  I think it's a hardware failure, but that's all that can be easily fixed? I opened the laptop a few times to replace the CPU and clean, but I don't think that the fault is negligence on my part because I always open it in an antistatic environment. To be honest, this laptop to cost me too much money in modernization and if this fault is something that requires expensive repairs, I can just sell it for parts.

  Any help is appreciated.

  Hi Mary,

  The blink code is used to locate the real failure so that the repair technicions knowing where to start checking for problems. Unfortunately these codes are published not generally then I suggest that you call a Toshiba authorized repairer and ask their opinion on fault. This way you do not have to engage in costly repairs until you know how much they are likely to cost.

  Kind regards

• Satellite 1800-400 does not illuminate

  Hello!

  Recently, I have install windows xp pro. The computer worked OK for a week. Sound suddenly, I press the power upward and nothing happens except the energy that lights up. I looked and seems to be in hybernation. I try to press the "BACKSPACE" key at the same time and touch power, but nothing.

  If someone could help?

  Thank you.

  Hello

  Remove the battery, connect the device to the power supply and press the power button only. If you want to enter the BIOS settings press the ESC key after you start the laptop.

  If the device is connected to the power supply power led indicator panel system must be green all the time. After the start of the unit, the second Green led must be enabled to show that the unit is running. HDD led show also initially HARD drive activity. If there is no response after pressing the power button / stop, I guess that there is a hardware problem

• Satellite P100-400 does not start correctly

  Hello

  I left my laptop on and when I got home, it's sleep mode, I hit the mouse and the screen is always black, and then I restarted... When it restarted, some green lines and Red appeared on the screen, what is - anyone know?

  When I start windows, it goes to the loading screen and then everything goes black and it restarts again...
  But when I go to safe mode, it's all ok, but he said that I've got some graphics card conflict... I already tried to reinstall graphics drivers...

  Help please. I really don't know what to do...
  Sorry for my bad English and thanks in advance...

  Hello

  I don't know what the problem is here, but you can start Notepad in safe mode and try to roll back the BONES at that earlier time. You may be able to use the laptop properly. Test it and post the results.

• Edge 15 does not start in Win10 after upgrade

  Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another power cycles, I saw a screen for "automatic repair", then he went and I'm still stuck on a white screen, noise from the hard drive, it is not read.

  I also tried to boot "Windows boot manager" and hard drive, both got white screen.

  Any help?

  P.s. I upgraded to Win10 once a factory reset to Win8.1, so I do a factory reset, but it seems impossible to get to the option more.

  Thanks for your help, I've actually made a diagnosis of HD and found too many errors, I'll replace the HD.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite P200-143 does not start

  My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

  I tried to take out the battery for the afternoon, but no effect

  Any suggestions?

  P

  It looks like a dead last.
  The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

  Good luck