Satellite 1800-400: internal modem does not work with Ubuntu Linux?

Hello

I try to get the internal modem on my departure from 1800-400 of Satellite under Ubuntu Edgy. All other works out of the box except the modem software and I was wondering if one can be able to help with this.

I have been on many Linux forums and followed a number of tutorials, but none have worked for me so far.

Toshiba seems to say it should work, but not enough for me detailed instructions are!
http://newsletter.toshiba-tro.de/main/main/MachineInfoAus.php?OS=1&machine=119&devices=5&d_ty p = 208

The modem manufacturer's site say it should work but still not enough instructions
http://www.Modemsite.com/56k/lucentamr.asp

And found some good info here...
http://www.Heby.de/ltmodem

But I'm still stuck not being not very irritable not! Any ideas would be greatly appreciated.

See you soon

Hello.

It seems that this laptop uses a Modem Chip Askey (Lucent)
I see only one way to use this modem in Linux.
You must look for the modem a pilot who takes in charge this chip and is designed for the installation of Linux.

It s very difficult to find the right driver for Linux because there are a lot of different Linux distributions and not all drivers will work.

Tags: Toshiba

Similar Questions

  • Satellite 1800-400: CD Rom is not working / can't use recovery discs

    Hello

    I have a satellite 1800-400. The cd present in Device Manager, but it does not recognize the cd is in the drive. I need to use the recovery cdsas the system was damaged virus etc. Is there a way I can work around the problem of cd player.

    Thank you

    Hugues.

    Hi Hugh,.

    When you try to start the laptop from the CD made in fact tru to access the CD-ROM or it directly boot from HARD drive?

    If the notebook is actually an attempt to boot from the CD but do not then it can mean that you CD-ROM is defective or that the recovery disc itself is damaged in some way.

    HTH

  • Satellite C660 - new internal keyboard does not work

    Hello

    I'm completely stuck I have a portable satellite c660 keyboard did not work.
    So I bought a replacement keyboard and installed and checked in the Device Manager and it says it is there and works correctly, but the replacement keyboard still does not work.

    I updated the bios and uninstalled the keyboard drivers and reinstalled them that I've done everything I can think off to try and get this new keyboard working but I am having no luck and could so with some assistance.

    Have you ever checked if the USN external keyboard works properly?

    I ask because in the case where the external keyboard does not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or a problem of system m.

    In case the external keyboard would work properly, you had any luck with the new keyboard. It might be possible that the new keyboard is malfunctioning.

  • Satellite S50T-B - internal microphone does not work

    I have never attempted to use the microphone before today, so I don't know if it's a question that has always existed or barely took place recently.

    I have Windows 8.

    The internal microphone is not working I have a microphone with my recording devices menu. There are currently enabled, and another one that says that it is not plugged. This second microphone appeared after that I uninstalled the driver Conexant Smart Audio that was suggested on another forum.

    Currently, I use Microsoft windows HD audio device and outside this second pilot disconnected microphone in the sound menu. When you use the registered sound software sometimes I hear a click and when I click on the menu of the bar beside the microphone fills.

    I can't take the laptop where I brought what I moved the country after purchase.

    Hello

    As I m not wrong not the internal mic belongs to the internal webcam.
    From my understanding, you need to activate the webcam in Windows settings

    Open the camera app Point to the lower-right corner of the screen, move the pointer of the mouse to the top and then click settings. Click on Options. Here, you can adjust the settings for each option.

    As I m not wrong there, you should be able activate the microphone on or off.
    Finally if you want to use this microphone, you must set its default value in the sound? recording device tab.

  • Satellite L500 1QK - output HDMI does not work with a Toshiba DVD player?

    Hello

    Why Toshiba DVD player does not work when I plug the HDMI out on my other bigger screen...

    While he plays well the DVD on the computer and, if I can get the signal HDMI OUT with VLC playing other video formats...

    I hope there is a way to unlock this, because I prefer to play DVDs on my computer (for his problem because I have the ear is not good)

    Thank you in advance for your help, if you can.

    Kind regards.
    Mylène
    (Satellite L5001QK France)

    Hello

    To be honest I n don't know 100% what your problem is.
    If you want to watch DVD movies on your computer with the help of a reader DVD Toshiba but the captain must be indicated on the external screen follow these steps:

    When you have connected the HDMI cable (other) outside on the screen, use FN + F5 and switch to the external display only. When you see the desktop on the beginning of the display external Toshiba DVD player and I think that everything should be OK.

  • Satellite L300-22R - fan control does not work on Ubuntu

    Hello together,

    I have a problem with my Satellite L300-22R model PSLB8E-0QL028GR (Ubuntu 8.10) and the fan control. At first the fan does not work. After a few minutes, the fan operates at 100% until the laptop is turned off. I think it's a problem with acpi.

    The BIOSis: InsydeH20, worm. 1.60. There is not a more recent.

    Thank you for your support.

    Hello

    Is this laptop model is not supported for Linux and everything you find on the Toshiba download page (updates to the BIOS) is for the use of Windows XP Home/Vista edition only. :(

  • Satellite A500-1f5 - FN key does not work with Win 7 64 bit

    Hello

    The FN key does not work

    I have the installer: added value package + Flash Cards Support utility

    Laptop model: Satellite A500-1f5

    WIN 7 64 bit

    Thank you

    Hello

    Try restarting Flash cards.
    Start > all programs > Toshiba > utilities > restart Flash cards.
    After doing this press FN button several times.

    or remove the vap utility and support of flashcard and download:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    Then install the utiliy and flashcard Vap, support.

  • CM100 modem does not work with BELKIN router

    Hello

    I just bought a CM100 used on eBay, so I can get rid of my Charter rental, but it doesn't seem to work with my BELKIN router.

    The model number is BELKIN F5D7230-4. I tried everything, but the 'CONNECT' led will continue to Flash.

    I thought it was my mode, but when I bought a new LINKSYS WRT54G2 router, it works perfectly.

    Could someone help me please? If I can't use the BELKIN one, I'll keep the new router LINKSYS, suggestions?

    Thank you!

    (Mod Note: under the direction of compliance from the forums.)

    As CM100 works with the WRT router... This means that there is no problem with the CM100... If the Belkin router does not work then, you make the Belkin router settings. Your modem CM100 is absolutely perfect...

  • WiMAX Motorola USB modem does not work with my laptop. Help, please.

    My clear USB modem worked for a year and a half and now it will not.  It does not work on my desktop PC.

    A clear employee told me that it is a problem with my laptop.

    Can someone help me?  I do a system restore?

    I have a wireless modum and my Presario CQ50-130US will not accept the connection.  I called the provider, and they say that all systems are a 'go' at their end.  The problem is with my laptop.  I didn't let any guarantee.  Any suggestions?

  • Satellite A100 - 906 internal LCD does not work

    Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
    Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
    What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

    Help, please.

    > External monitor works too.
    You said that external monitor is not affected. Right?

    Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
    If the graphics chip would be affected, both screens would not work properly.

  • Satellite 1800-100: video output does not work

    Jen
    I just installed windows XP on my old Satellite 1800-100, but now my video output no longer works. So I just downloaded the latest version of the driver, but there is no way I can get it installed. According to Windows the new driver is more recent, so it won't let me update. And when I try to uninstall the display driver, I have to restart for the taking of effect and wile it restart automatically installs the standard driver again.

    Can someone help me?
    Welcome,
    Daan

    Hello

    You say TV out port, or monitor the port? As far as I know, this unit is pre-installed with Windows XP Home edition at home and all the drivers can also be used for WXP Pro.

    You preinstall your own OS (no recovery image)?

  • Satellite 1800-911: standby mode does not work properly

    Hello.
    I had use the model of my laptop Toshiba Satellite 1800-911 for 3 years and it's great and I had a few problems. But now, after the installation of Windows XP Professional SP2, I have a big problem. When I put in stand by mode cell phone it's going to sleep and it's great. But the problem is when I would go my work since the mode ensures that is on the HARD drive on the laptop, but the screen is always black and I have to reboot the system. I can't use my PC and my work came out... Help, please

    Best regards
    Nikola comedy
    [email protected]

    Hello Nikola

    I guess that the Windows XP SP2 update is responsible for this problem.
    Well, in this case you must update the Power Saver utility.
    What you can try on the Toshiba site.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Perhaps it is also important to update the BIOS.
    Please check if your device has the latest BIOS version.
    Here you can find the BIOS.
    http://www.toshiba-tro.de/subpage/BIOS.html
    If you decide to update BIOS please check the update on this device procedure.

    Good luck

    Good bye

  • Satellite M40-307: accessibility utility does not work with the limited user account

    Hello everyone,

    I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

    This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

    In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
    I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

    So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

    Hello

    Well, you should try to activate the rights for the TACSPROP.exe.
    To do this, you must enter the operating system as an administrator.
    Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

  • Re: Satellite A300-234 - product key does not work with another disk the

    Broke the new Satellite A300-234, flied Windows Vista. I did not the backup copy of the system. At the system from a disk of another laptop Toshiba A200-23d.

    The key away. What should do?

    Hello

    The point is that the product key from the underside of the laptop can t be used with another drive in Windows. It s just for the preinstalled OEM version and doesn t work with other versions.

    Normally you n t have to enter a product key if you are using the Toshiba recovery disc because it contains a picture of the factory settings and is different from a disc of Microsoft Vista.

    Anyway, as said Akuma you can order a new drive Toshiba Recovery directly.
    The another model of laptop recovery disk will not work because the hardware is different.

    Good bye

  • Satellite Pro 2100: Quick fix does not work with Win XP SP2

    pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
    Are there drivers for Windows XP service pack 2?

    Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

    When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

Maybe you are looking for

  • Using the Excel sort function through tiara.

    Hello I'm looking to make use of the sorting function in Excel via DIAdem. I export the data of my. TOC files in a newspaper running in Excel, and I'd like to be able to sort out a selection, in ascending order, based on the data in the first column.

  • Any new license of Connect

    Is there anyone know about the new license all connect for asa5500-x. License is all ASA 5500 - x 2 still free just connect more or apex? Please let me know, thanks Rgds,Charis

  • Draw straight lines with Photoshop and the Wacom Tablet pen?

    HelloI was just wondering how to draw straight lines using pen Wacom Intuos and Photoshop. I was hoping there was an a little sovereign tool or something that will help you with it but can not understand. Thank you ahead for your help with this.

  • How to download new standard design adobe suite bought in 2013? [was: Hello.]

    I bought the standard design adobe suite in 2013. my computer recently crashed and I am trying to get all my programs. How can I re-download the programs and enter my old serial numbers... When I tried to do so earlier he said that my serial number w

  • My serial code is 18 digits, but I need a 22 digit code?

    HelloI recently got Adobe CS5 Master Collection of a semi distant recently deceased relative. I have the box, three disks and a serial number, but when I go to install the product, it takes a 22-digit, and the registration number is written has only