Satellite 1800-400, what CPU?

Similar Questions

• Satellite 1800-400, ERROR! F3D failed

  Someone can help me troubleshoot above?
  First of all what does this mean?
  I had a very small Satellite 1800-400 with me running. I was convinced that it was full of viruses so wanted to start all over again with the recovery disk. All I got was this error.
  In addition, it is said software being installed, please wait and a 0-100% bar. (nothing happens)
  Being a novice surf autour, I picked up a new BIOS @ this site. After the install was not successful so I used the command chgbiosa on the a:\, this gave me a command prompt to enter the biosfile in and I have upgraded to version 2.2 (I really thought he could help silly)
  Retry the recovery disk didn't give no solution so I'm really looking forward to all the solutions to this disaster.

  Hi sms,.

  Sounds strange! Is the recovery CD in good condition? Is this perhaps a scratch?

  Goodbye Tom

• Satellite 1800-400: CD broken

  Hey,.
  A week ago, my CD-ROM started acting weird. It doesn't read any cd what so ever. I want to replace it, but my question is... I can do it myself, and if not it'll be expensive...?

  My Toshiba Satellite is a series of 400-1800

  Hello

  Sorry, but the DVD of the Satellite 1800-400 drive is set up.

  If you have no chance to swap it out.

  Good bye

• Satellite 1800-400: cannot run/install applications after installing XP

  I bought a Satellite 1800-400 for my daughter for her school work, formatted, installed XP pro, and when I tried to install the software for a wireless card (3Com) for internet access, he said only: "the application failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  So I tried another card (Belkin) software it says "D:\ is not a valid Win32 application". So I tried to install the printer software and he says: 'the entry point of procedure not found in KERNEL32.dll dynamic link library.

  So I thought I'd try XP Home, exactly the same, Win 98 and WinME function without problem.
  I have also flashed the Bios, but it made no difference.

  Someone at - it ideas

  Simes

  Hmm, it s very strange. For me, it seems that some applications are not compatible with Windows XP. I m not 100% sure why it happens, but I put t think that it s a RAM problem because the other Windows Me and 98 to work properly.
  But nothing is impossible

  What version of BIOS is installed on your laptop? On the Toshiba page pilot 2.20 BIOS was released.
  If your laptop uses an older version, you can try to update.

• Satellite 1800-400: need DVD - Rom

  I'm looking for a dvd - rom for a Satellite 1800-400. Where can I get one?

  Hello

  If you check the manuals for Satellite 1800, you will see that this camera comes with different drives. One of them is SD-R2002. Google all over the place. You will find a lot of online shops where you can order one. Another solution is the Toshiba service partner.

  By the way: check the ebay also.

  Good bye

• Satellite 1800-400 ME upgrade to XP Pro?

  All successful one satisfactory to a Satellite 1800 400 upgrade or similar (384 MB of RAM, 20 GB HD, 800 MHz Celeron) of Win ME?

  Would prefer to upgrade to XP Pro, but pure install 2nd choice.

  If I have the HD format for a clean install, an updated XP version would recognize the recovery CD Toshiba a legitimate copy of the ME - I've heard that there may be problems?

  I have the intention to upgrade the BIOS and collect all the drivers available for this model proposed by Toshiba for XP, but will there still be problems with all the material?

  Toshiba drivers must be loaded in a special order, and that is during or after installing XP?

  XP is likely to be faster or more slow/about the same thing as ME, with above hardware specifications?

  All advice welcome, because I have not upgraded the OS on a laptop before, and the potential problems seem more important than with desktop computers.

  Geoff

  Hello

  I put t not see why Windows XP Home edition should not be working on your device correctly. On this forum I have read many topics where users present on Windows XP Home edition on the old models as yours.

  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp and you will find drivers for Windows XP Home edition.

  After installing WXP install display and sound driver first. Then install other drivers of material. The next step is installation of Toshiba stuff:
  Common modules
  Controls
  Energy-saving
  Public services.

  It is important to install common modules like the first.

• How to connect by Satellite 1800 400 on TV?

  Hello
  I want to connect to my Toshiba Satellite 1800/400 on my TV, but I don't know how to install a secondary graphics card. My graficscard is a Trident Cyberblade Ai1 video accelerator.
  Please help because I get hopeless and frustrated because I need for school

  Hello Kevin

  As far as I know you don t need to install a secondary graphics card. The laptop got the output video output jack to transfer NTSC or PAL data to external devices (TV).
  If you want to activate the TV-out function, please go to display properties, and then click Advanced. Now click the device tab to display.

  There you can set the parameters on television and in the multi-screen TV/LCD devices section. Don t forget the TV Standard (PAL or NTSC).
  However, with the FN + F5 key combination, you can choose between the LCD and TV.

  Good bye

• Satellite 1800-400: CD Rom is not working / can't use recovery discs

  Hello

  I have a satellite 1800-400. The cd present in Device Manager, but it does not recognize the cd is in the drive. I need to use the recovery cdsas the system was damaged virus etc. Is there a way I can work around the problem of cd player.

  Thank you

  Hugues.

  Hi Hugh,.

  When you try to start the laptop from the CD made in fact tru to access the CD-ROM or it directly boot from HARD drive?

  If the notebook is actually an attempt to boot from the CD but do not then it can mean that you CD-ROM is defective or that the recovery disc itself is damaged in some way.

  HTH

• Satellite 1800-921 - what memory I need?

  Hello

  I have a toshiba satellite 1800-921. The hard drive is broken and I managed to get my hands on one. My problem is. Is that I want to upgrade the memory on this subject but I can't know what kind of memory stick that I need.

  I searched the forums and the site with no luck. Think im going blind... haha. Is could someone please tell me what I'm looking for or maybe even a Web site that I can buy an of? I am from the United Kingdom.

  Thanks in advance for any help you may be able to give me jay

  Hello

  Satellite 1800 is old enough for laptop... I searched a bit using Google and it seems to PC100 SDRAM SODIMM for her, but you can also choose PC133 modules, they will also work with low speed PC100.

  I m not sure how it supports RAM, but I think 512 MB maximum for this oldie

• Satellite 1800-400: How do I install the driver for graphics card

  Hello

  As I mentioned in the topic I downloaded a graphics card driver
  http://be.computers.Toshiba-Europe.com
  for my Satelitte 1800-400.

  The problem is that the Once unzipped downloaded zip file does not contain a Readme with some information or an .exe file to install.

  I have no idea what to do with it, but I need the driver car-DVD playback is disappointing.

  Thank you in advance.

  Hello

  Well, if the folder doesn't contains all .exe files, then you should try another option.

  Go to Device Manager and select the graphics card. Then right click and choose the option install or update driver. Then choose the driver source.
  This procedure should work properly.

• Satellite 1800-400 additional memory

  starting at the... legacy laptops a satellite s1800-400 with 128 MB of ram and 20 GB hard drive. want to upgrade the ram, but what do need me and how do I do it?

  You can improve it to max 512 MB and you can use the modules:
  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  The slot should be placed at the bottom of the unit. Just remove the screws and the cover and you will see the banks

• Satellite 1800-400: internal modem does not work with Ubuntu Linux?

  Hello

  I try to get the internal modem on my departure from 1800-400 of Satellite under Ubuntu Edgy. All other works out of the box except the modem software and I was wondering if one can be able to help with this.

  I have been on many Linux forums and followed a number of tutorials, but none have worked for me so far.

  Toshiba seems to say it should work, but not enough for me detailed instructions are!
  http://newsletter.toshiba-tro.de/main/main/MachineInfoAus.php?OS=1&machine=119&devices=5&d_ty p = 208

  The modem manufacturer's site say it should work but still not enough instructions
  http://www.Modemsite.com/56k/lucentamr.asp

  And found some good info here...
  http://www.Heby.de/ltmodem

  But I'm still stuck not being not very irritable not! Any ideas would be greatly appreciated.

  See you soon

  Hello.

  It seems that this laptop uses a Modem Chip Askey (Lucent)
  I see only one way to use this modem in Linux.
  You must look for the modem a pilot who takes in charge this chip and is designed for the installation of Linux.

  It s very difficult to find the right driver for Linux because there are a lot of different Linux distributions and not all drivers will work.

• Satellite A200-1ZB: what CPU max can I use?

  Hello..

  I have Toshiba Satellite A200-1ZB model with processor Intel Pentium Dual-Core T2370 @ 1.73.
  I was wondering, what processor max speed is supported by this model? Anyone know? (without overheating of course ;)

  Specs. (HWiNFO32)
  Processor: Intel Pentium Dual-Core T2370 @ 1.73, FSB:533 MHz, L2: 1 MB
  CPU platform: Socket P Μpga478 (Micro-FC-PGA) / mBGA479 (Micro-BGA)
  Motherboard Chipset: Intel GM965 (Crestline-GM) + ICH8M
  Support FSB frequency: 800 MHz
  Memory: 2 x 1024 Samsung 667 MHz (PC5300)

  Upgrading CPU is always risky, and in my opinion, no one can tell if the laptop would have functions properly after these updates.
  Another problem may occur.
  First the BIOS of laptop computers could not handle the new processor or there may be a compatibility problem should be know that a CPU creates stronger more heat dissipation that could lead to overheating or unstable work.
  Last but note would less affect these updates and void your warranty!

  But if you want to know what CPU can be used and then check the properties of the chipset on the Intel page and you should find the information on compatible CPU s

  See you soon

• Satellite 1800-514: what FL inverter is compatible

  What other Toshiba can I take the inverter of to adapt to a satellite 1800-514

  If someone posted check if please http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true and request technicians.

• Satellite 1800-400: need new motherboard

  Hello

  I have a Toshiba Satalite 1800-400 it is about 4 years old and is under warranty, but I know there's a problem with the motherboard to irreparable. Since I didn't know this problem I tried to source a replacement, does anyone know where I could find one? I looked everywhere.

  Thank you

  Mark

  Hello

  I also recommend to ask the service partner Toshiba for this motherboard. In this case, you can be 100% sure that this motherboard is supported and compatible with your device.

  Good bye