Satellite 1800-514-display is off every few seconds
Yesterday, I have a Toshiba Satellite S1800-514. I have install the OS (Windows XP Home) again.
Laptop screen turns off every few seconds. When I press the small button above the power switch (sensor for portable fence) there is a beep and the screen wakes up again.
Same procedure again after a few seconds (5-50 sec).
Is there someone who can explain what happened and how to fix this?
The problem exists in all modes (Setup/bios dialogue, BACK, starting of WinXP, running current WinXP command prompt).
It's not easy to say what is causing the problem, it could be the inverter FL, chip graphic, LCD display...
In your case, you should first test an external monitor. If the external monitor doesn't work properly, it s a problem with the graphics chip or motherboard. If the monitor does not work this is a problem of the FL inverter or LCD.
I have a portable satellite 1800-514. now recently I can not the laptop for initialization or power on when I press the power button. Although sometimes it lights up then the sreen flips on and off with a beep. Fortunately, now it's on and uses it to write this post may be at the time wherever I stop later he won't come again. also, I need the display driver for this laptop please help.
Copy all the files in a folder. Go to Device Manager and open display adapter properties. Change tab pilot and use the update driver option and navigate to the folder of the driver.
Try it on this path.
It's very strange that you can not start the unit at all. In this case it is probably a hardware problem (beep).
I'm looking for a driver for xp for Toshiba Satellite 1800-514 grafikcard
Can someone tell me, which grafikcard have this laptop?
Why the S series is not listed in the socket driver?
You can find the display driver on the European driver Toshiba page.
You must choose Archive for laptop product type.
This laptop is old so that the drivers have been moved to the archive area.
The graphics card seems to be Trident but there are two display drivers;
I am trying to install windows on my Satellite 1800-514. but when Setup tries to copy files to the hard drive I have some errors on some files are not copied correctly (it says it can't find them, I checked well and they are on the cd).
is not always, but often the same files. jump results in an unnecessary installation (cannot start). It is the first time ever I am trying to format and reinstall windows on this laptop. I tried gentoo (linux) for a few days and it seems to work very well (except it's me mistakes sometimes when starting from cd)
so far I have tried:
-Another cd (all seem to give me the same problem, they worked on all the others I've used them on front of the pc...)
-windows XP pro cd, gave me an error of not being able to load a file (looks like the installation of 2000?)
-have you memtest86 to check memory, he finds no errors, also I tried to install with just 1 of my 2-bands memory, that has not helped either. so I don't think that memory is the problem.
-do you have a chkdsk /R from the recovery console to check the hard disk for errors, no have been found...
I'm naïve, what to do/try then?
Reset you HARD drive after using the Linux operating system? If please do it properly and then try to install Windows using the recovery CD.
If the error again please contact the Service partner. In my opinion there must be a missing file.
I have a portable Satellite 1800-514, I need to get some parts of second hand for this that I have a few internet size for parts, but I need to know what other laptop I can take parts to repair it.
These are the parts that I need of keyboard, screen, inverter and the front of the case where the screen is.
If you are looking for second hand parts then I would recommend the search on Ebay for a Satellite 1800-514 of second-hand sites.
Especially a full section of second hand is much less expensive than individual parts and devices!
In my opinion, you can use the entire Satellite 1800 series parts.
The screen, keyboard, FL inverter and the screen frame must be the same.
In addition, if you want you can contact Toshiba service provider in your country.
Guys might provide a list of compatible parts and devices
I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.
It is a little annoying and it disctracts me of what I'm doing... is there a solution?
Thank you very much.
This behavior is perfectly normal and nothing to worry about. If you find the noise irritating cooling fans you are likely to change their behavior by using the utility of Toshiba power where you should be able to set the cooling mode to run more quietly. I think trhe default is to allow the CPU to run at full speed, which will, of course, the fans turn every few seconds, but by reducing the speed of the CPU, the heat produced will be lower and therefore the fans will run less often.
I'm developing an application on a Satellite 1800-514. Here's the problem: is it possible to turn on the laptop in sleep mode without pressing the power button (for example, by pressing a key on the external keyboard to PS2, or by moving an external mouse)?
Thanks for any help!
You should know that if the Toshiba power saver is installed on the unit the Microsoft power management doesn't work. In addition the energy saver is responsible for standby and hibernation mode.
Here, you can set different parameters.
Well, I can't say much about your developed application. I think that if you want to use you own tool, so you should remove the energy saver. But you know all the tools and the 3rd party applications, you can use at your own risk.
PS: I'll be a happy man if someone here in the forum will give you a precise answer.
It is a forum for users with currents and issues problems and not an application developer.
I just installed Windows 2000 on my satellite 1800-514 because with Windows XP, it's so horrible slow and I hope that goes better with win2000.
then I tried to install the drivers of my cd but then after restarting, I got a blue screen. so I guess that the pilots were not compatible with Windows 2000.
im looking for the correct drivers, but in the section download toshiba is now no Posibility to select the 1800 series. So where can I get them.
Please check a little better all the options before you write something absolute here. Everything you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Please note that Satellite 1800 is old enough laptop model, and you should search under Satellite-Archive first choose Archive under product type.
All that s!
Hello, I installed puppy 431 and 412 (frugal HD) on a Toshiba Satellite 1800-514 with processor celeron 1 ghz, 256 MB of ram and 15 GB HD.
When I try to restart it just hangs in a black screen, but does not restart. If I want to stop, no problem.
Windows XP restarts correctly.
could someone help me please?
I have updated the bios with the latest version, but makes no difference
I tried several versions of linux, but all have the same problem (puppy 412, eccentric 1.1, pup214rc5).
I tried everything I was advised to do in linux forums, they think it's something related to bios...
Post edited by: abarnabe
If Windows XP starts correctly, the problem is related to your Linux distribution. What does s and there is no hardware malfunction.
As you know I hope, Toshiba doesn't supports Linux distributions. This means that you have to look for a solution yourself, and here the most users use Windows. So I think you should ask the Linux professionals.
Here's a helpful article:
[You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]
can I put a 60 GB HDD in a satellite 1800-514
AFAIK you can certainly use the 2.5 s of 10 GB, 20 GB or 30 GB HARD drive but I m not 100% sure if BIOS will recognize the size of 60 GB.
I searched a bit for certain part numbers: HDD2151B, HDD2157G, HDD2154B, HDD2159B
What other Toshiba can I take the inverter of to adapt to a satellite 1800-514
If someone posted check if please http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true and request technicians.
I finally decided to add wireless to my old Satellite 1800-514, but when I try to install the card, reports of windows that my drive does not contain the correct driver. I downloaded the latest drivers from the website of Dlink but I get exactly the same error, is this model of incompatible card with the machine?
I was originally under XP Pro SP2, but I went down to XP SP1 incase it was an SP2 issue, but nothing did.
I don t think that there is a problem with the device.
I studied a bit on the net and found information about the pilot.
It seems that users have problems with d-link driver that was downloaded from the d-link website. The driver on the CD supplied with the PCMCIA card should work properly.
But if there is no if you need to contact d-link support.
Also check this site:
On iOS 9.3, 6 s iphone, the phone will freeze every few seconds in ANY application. When it thaws (after 3 to 10 seconds), all entries with the touch screen, the home and lock buttons will be running very quickly.
I tried the following:
-Turning off the night shift
-activate airplane mode
-cleaning and restoration from backup
-downgrade iOS 9.2.1 (seems remedy) and back to iOS 9.3 (back problem)
It's extremely unusable because typing seems frozen, then a bunch of letters appears when it thaws, pressing the buttons for locking/unlocking inadvertently takes screenshots because it saves that kept pressed buttons, apps are impossible to use, and scroll of sites and application will freeze and then jump down/up.
See if you can do a reset... it can help him freeze.
Tap settings > general > reset > reset all settings
Then, restart your iPhone to test.
* No data is lost due to reset
Computer model: HP Pavilion e040us 17
Product: EOJ89UA #ABA
Windows 8 (not 8.1)
My wife left her cell open and when she came back, she was asleep. She tried it to wake up (hit the wrong key), got frustrated and held down the power button to turn off. She doesn't think that updates have been applied since the screen was black
Now, once it is started, it can use one of the applications 'tiled' who do not use the desktop computer. Once the office is open, the screen refreshes every few seconds. The entire desktop goes blue, the desktop icons and background image disappear, and everything disappears from the system tray. The system tray starts to rebuilds with the battery indicator, indicator of network, "speaker" icon, date & time, then all the rest of the system tray is back with the office (background image and all the icons). In about 1 or 2 seconds, the cycle starts all over again. I left the laptop that works thinking that something just needs to work to stand, but two hours later, it was still there.
If I press the windows key enough times, he swaps ends up back in the tile view, and then he begins to paint it too. The screen goes blue and then everything comes back.
While this is the case, the only way to get the stop menu is ctrl + alt + delete. Moving the mouse to the bottom right of the screen to bring up the menu of the settings does not work because the screen refreshes faster that you can click on the settings button.
I restart the computer in safe mode and it didn't happen.
I'm stumpped and really need help!
I don't know if this will help, but for me, I used system refresh to restore my laptop to factory settings (but keep my documents) and the problem seemed to go away. Partially, I think it was because I was running Classic Shell for Windows 8.0 rather my 8.1 - Although may not be the problem, refresh the laptop seemed to work!
My 16 month old 60 "Sony Bravia TV KDL 60EX720 begins to turn and the automatically every few seconds.
Follow these steps below:
- Turn off the TV.
- Unplug the power cord of the TV from the power outlet.
- Let the TV remain without power for 60 seconds.
- Plug the power cord into the power outlet.
NOTE: If the TV is connected to a surge protector or power strip protector he remove the power strip or surge protector and plug it directly into the wall outlet. If the problem is resolved, the problem is with the power strip or surge protector and not the TV.
If the problem is still not resolved after following all the steps of troubleshooting, service will be required.
You can locate the centers of nearest service from the link below.
If my post answered your question, please mark it as an "accepted Solution".
Maybe you are looking for
Charge of 'mapsgalaxy' and a 'request' toolbar presented themselves. Hate to ask as it is for me a good search engine. It has changed my home page to ask, with on demand, took me 45 minutes to correct this. Topical issues has can't circumnavigate the
I need to access a webpage of Ethernet switch to activate certain settings, but I have to do it by programming that my application is used in a manufacturing environment. Any ideas how I can do this. I managed to read the page with DataSocket Read,
How can I have my default server (ATT) e-mail format, windows XP (which I want to keep as a default), replace the Outlook Express window when I'm tryin for a company whose I am the web site e-mail browzing?
Currently, when I'm browzeing a website and click on their email option to write, I always get the format of Outlook Express. I have it fill my msg, click on send - he's trying to send but don't market not to go. I just get a msg of error that server
I'm working on a friend's computer, a shitty Compaq Presario CQ60, running Vista. Now the computer cannot start from the CD drive or HD. Each time, computer throws this error window "need to restart the installation. I have access to advanced and tri
I HAVE PENTIUM 4 laptop OF hP, I RECENTLY LOAD WINDOWS 7 on IT, BUT NOW IT IS No. AUDIO OUTPUT to COME. IT IS SAID REALTEK AC97 AUDIO DRIVER IS NOT INSTALLED CORRECTLY. I WANT TO GET THESE DRIVERS. PL. SUGGEST FREE DOWNLOADS, DRIVERS, AND A LINK, IF