Satellite 1800-514: I can put 60 GB HARD drive

Similar Questions

• Satellite U500 - what size can be a new HARD drive?

  Hello

  I have the Satellite U500 series
  I would like to improve my ability to drive, what is the maximum I can do and where... ?

  Concerning
  Sagar

  Hello

  With the help of the search function of the forum you will find this answer ;)
  The controller SATA HDD from the laptop support.
  SATA controllers are not confined to a specific size of the HARD drive. So, theoretically, you can use any HARD drive 2.5 SATA.

  Welcome them

• Satellite P200-1EE I can install a 2nd hard drive in the Bay of spare?

  First of all, Hi everyone!

  I have the laptop model above, and he has a spare drive Bay. There are connectors for pins at one end, but it doesn't seem like the drive will fit. It's like there's a missing - like component case Connector for the 1st disk slot. I bought a 500 GB drive and tried to see if he would be in shape. The 1st disk has a metal basket attached, and who does not.

  Is it possible to install a 2nd drive for this model? If so, what would need to do?

  Thank you!

  Andy

  Hello

  If you have a connector in the second HARD drive Bay, you can add a second HDD. But you will need a wire basket as on the first HARD disk. Therefore, you can contact an authorized service provider because you can get all the parts on their part.

  On the Toshiba site Web is a list of all ASP s, check it!

• Satellite 1805-S253: How can I replace the HARD drive?

  Anyone know where I can find a manual installation to install the new hard drive? Recently bought a new drive hard, but don't can't find how can I change drive.
  TKS.

  Hello

  As far as I know the HARD drive is placed on the right side of the laptop.
  I think it's on the same side where the reader is placed.

  1. turn the computer.
  2. remove the screw of the cover of the HDD location and remove the cover.
  3. remove the screws fixing the HARD drive ASSY.
  4. hold the HARD drive door handle and remove the drive HARD ASSY.
  5. remove the screws that attach the HARD drive.
  6 detach the HARD drive from the HARD drive support.

  That's all

• Cannot install Windows 2000 on my Satellite 1800-514

  I am trying to install windows on my Satellite 1800-514. but when Setup tries to copy files to the hard drive I have some errors on some files are not copied correctly (it says it can't find them, I checked well and they are on the cd).

  is not always, but often the same files. jump results in an unnecessary installation (cannot start). It is the first time ever I am trying to format and reinstall windows on this laptop. I tried gentoo (linux) for a few days and it seems to work very well (except it's me mistakes sometimes when starting from cd)

  so far I have tried:
  -Another cd (all seem to give me the same problem, they worked on all the others I've used them on front of the pc...)
  -windows XP pro cd, gave me an error of not being able to load a file (looks like the installation of 2000?)
  -have you memtest86 to check memory, he finds no errors, also I tried to install with just 1 of my 2-bands memory, that has not helped either. so I don't think that memory is the problem.
  -do you have a chkdsk /R from the recovery console to check the hard disk for errors, no have been found...

  I'm naïve, what to do/try then?

  Hello

  Reset you HARD drive after using the Linux operating system? If please do it properly and then try to install Windows using the recovery CD.

  If the error again please contact the Service partner. In my opinion there must be a missing file.

• Need satellite 1800-514-pilot display for Win XP

  Hello

  I'm looking for a driver for xp for Toshiba Satellite 1800-514 grafikcard

  Can someone tell me, which grafikcard have this laptop?

  Why the S series is not listed in the socket driver?

  Hey mate.

  You can find the display driver on the European driver Toshiba page.
  You must choose Archive for laptop product type.
  This laptop is old so that the drivers have been moved to the archive area.

  The graphics card seems to be Trident but there are two display drivers;
  4.12.01.2307
  6.4022.22

  Check it!

• Recovery from sleep - Satellite 1800-514

  Hello
  I'm developing an application on a Satellite 1800-514. Here's the problem: is it possible to turn on the laptop in sleep mode without pressing the power button (for example, by pressing a key on the external keyboard to PS2, or by moving an external mouse)?

  Thanks for any help!

  Hello

  You should know that if the Toshiba power saver is installed on the unit the Microsoft power management doesn't work. In addition the energy saver is responsible for standby and hibernation mode.
  Here, you can set different parameters.

  Well, I can't say much about your developed application. I think that if you want to use you own tool, so you should remove the energy saver. But you know all the tools and the 3rd party applications, you can use at your own risk.

  PS: I'll be a happy man if someone here in the forum will give you a precise answer.
  It is a forum for users with currents and issues problems and not an application developer.

• Cannot find drivers for Satellite 1800-514

  Hello!

  I just installed Windows 2000 on my satellite 1800-514 because with Windows XP, it's so horrible slow and I hope that goes better with win2000.

  then I tried to install the drivers of my cd but then after restarting, I got a blue screen. so I guess that the pilots were not compatible with Windows 2000.
  im looking for the correct drivers, but in the section download toshiba is now no Posibility to select the 1800 series. So where can I get them.

  Greetings

  Hello

  Please check a little better all the options before you write something absolute here. Everything you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Please note that Satellite 1800 is old enough laptop model, and you should search under Satellite-Archive first choose Archive under product type.

  All that s!

• Satellite 1800-514: display strange question

  Hi all

  I have a portable satellite 1800-514. now recently I can not the laptop for initialization or power on when I press the power button. Although sometimes it lights up then the sreen flips on and off with a beep. Fortunately, now it's on and uses it to write this post may be at the time wherever I stop later he won't come again. also, I need the display driver for this laptop please help.
  Adams

  Hello

  Copy all the files in a folder. Go to Device Manager and open display adapter properties. Change tab pilot and use the update driver option and navigate to the folder of the driver.

  Try it on this path.

  It's very strange that you can not start the unit at all. In this case it is probably a hardware problem (beep).

• Satellite 1800-514: what FL inverter is compatible

  What other Toshiba can I take the inverter of to adapt to a satellite 1800-514

  If someone posted check if please http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true and request technicians.

• Satellite 1800-514: need parts such as keyboard, screen, inverter

  I have a portable Satellite 1800-514, I need to get some parts of second hand for this that I have a few internet size for parts, but I need to know what other laptop I can take parts to repair it.
  These are the parts that I need of keyboard, screen, inverter and the front of the case where the screen is.

  Hello

  If you are looking for second hand parts then I would recommend the search on Ebay for a Satellite 1800-514 of second-hand sites.
  Especially a full section of second hand is much less expensive than individual parts and devices!

  In my opinion, you can use the entire Satellite 1800 series parts.
  The screen, keyboard, FL inverter and the screen frame must be the same.

  In addition, if you want you can contact Toshiba service provider in your country.
  Guys might provide a list of compatible parts and devices

  Greetings

• Satellite 1800-514 - reboot with puppy linux 431

  Hello, I installed puppy 431 and 412 (frugal HD) on a Toshiba Satellite 1800-514 with processor celeron 1 ghz, 256 MB of ram and 15 GB HD.
  When I try to restart it just hangs in a black screen, but does not restart. If I want to stop, no problem.
  Windows XP restarts correctly.

  could someone help me please?

  p. s.
  I have updated the bios with the latest version, but makes no difference
  I tried several versions of linux, but all have the same problem (puppy 412, eccentric 1.1, pup214rc5).

  I tried everything I was advised to do in linux forums, they think it's something related to bios...
  http://www.Murga-Linux.com/puppy/posting.PHP?mode=reply&t=56314&SID=b46b2fe24eb0834 5021bed2078a398b0

  Post edited by: abarnabe

  Hi abarnabe,

  If Windows XP starts correctly, the problem is related to your Linux distribution. What does s and there is no hardware malfunction.

  As you know I hope, Toshiba doesn't supports Linux distributions. This means that you have to look for a solution yourself, and here the most users use Windows. So I think you should ask the Linux professionals.

  Here's a helpful article:
  [You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

• Satellite 1800-514: D - link G650 + PCMCIA card - cannot install drivers

  I finally decided to add wireless to my old Satellite 1800-514, but when I try to install the card, reports of windows that my drive does not contain the correct driver. I downloaded the latest drivers from the website of Dlink but I get exactly the same error, is this model of incompatible card with the machine?

  I was originally under XP Pro SP2, but I went down to XP SP1 incase it was an SP2 issue, but nothing did.

  Hello

  I don t think that there is a problem with the device.
  I studied a bit on the net and found information about the pilot.
  It seems that users have problems with d-link driver that was downloaded from the d-link website. The driver on the CD supplied with the PCMCIA card should work properly.
  But if there is no if you need to contact d-link support.

  Also check this site:
  http://support.Dlink.com/products/revision.asp

• Can I replace the hard drive of my Satellite A100?

  I have a Satellite A100 - 033 PSAANE, running Windows Vista Home Basic Edition. The hard drive is 60 g. I save almost all of my data to an external hard drive, but nevertheless hard drive eventually won't have enough space for the growing number of programs that I have installed various temporary files, etc.. For example, I would like to install VirtualBox and run XP (Ido have a copy), and Linux and perhaps a few other systems operating within it, but that is likely to consume more of hard drive space I have available.

  Anyone know if it is possible to get out of my existing hard drive and replace it with another of higher capacity? Is this possible?

  I need to reinstall Vista on the new disc, from the emergency disk that came with the PC. I don't mind this, but will be Windows Vista "recognized" when I try to install the new hard disk?

  Sorry if these questions seem naïve, but I don't know how to put a new hard drive in a laptop computer, or even if it is possible. I bought the Toshiba in February 2007, which was just after Vista had been released. I had not given the choice of XP: Vista was the only Toshiba operating system provide at this time. I was assured that a 60G hard drive would be perfect for Vista, but I have to tell you that, in my opinion, that I was wrongly advised, and that Toshiba should never have released a 60G machine for use with Vista. Where my wish to have a hard drive with a larger capacity.

  Yes, you can install a larger capacity HARD drive. In my view, the A100 can take any size SATA 2.5 "HDD, so you should be able to successfully install a 250 GB or 320 GB.

  In terms of Windows, you can reinstall using the Toshiba Recovery disk came with the laptop.

  Directions for use:

  Remove the screws from the cover of the HARD drive based on the laptop to access the HARD disk.
  Pull the HARD drive out
  Transfer media cradle of HARD drive to the new HARD disk
  Slide in the new HARD drive and screw the cover of the HARD drive.
  Turn on the laptop and press F12 to access the start menu.
  Insert your recovery disk and choose CD icon to boot from it.
  Follow the prompts to install Windows.
  Connect your original HDD to the A100 using a USB adapter to restore your files/documents.

  PS. Don't forget to back up your important files regularly. HARD drives can fail at any time, since they have delicate moving parts, even when new.

• Can I install second HARD drive in the Satellite A200-AH7

  I wonder if I can install the second hard drive in my laptop and if I can do this what equipment should I.

  Laptop computer has two covers of hard disk and manual is not clear on this subject.
  He said: some models.

  Thanks for the info

  You can't find the answer very easily.

  Remove the second HDD Bay cover and check if there are a few HARD drive connectors/pins.

  If Yes, then you could install a second HDD.
  If not, you can not use second HARD drive.

  Good bye