Satellite 1800-700 - f3d failed installation of Windows me

Similar Questions

• Satellite L300D - 21 p - failed Installation of Windows Vista 32 bit

  Hello!

  I recently bought a Toshiba Satellite L300D - 21 p, and now I wanted to install Windows Vista Business 32-bit.
  But still, the installation stops at where the screen says "how to complete the installation..." ".

  Do you have any idea what I need to do to fix this?

  Thank you very much for your answers!

  Greetz

  Stefan

  If you use the Toshiba recovery disc then you have no need to reinstall the SATA drivers.
  If you use Microsoft disc, you need the SATA drivers.

  But if the error message indicates that the installation is complete, then the HARD drive is recognized correctly and you should not have the SATA drivers in such a case.

  > Where can I get the SATA drivers?
  It seems that your laptop computer supports the processor AMD and ATI chipset.
  Driver graphics card contains the driver for chipset and SATA drivers needed.
  The different folder for the graphics driver and the drivers are placed in the folder:
  Packages\Drivers\SBDrv\Filter\NB

• Re: upgrade RAM satellite 1800-700

  I would spend my Satellite 1800-700 memory 1024 RAM. My operating system is Windows XP. I currently have 512 of RAM and BIOS 2.20 Trad.
  However, it would allow me to install 2 x 512 RAM.

  Please can someone help?

  Thank you kindly.
  Lee

  Hello Lee

  According to specification of laptop it can handle with 512 MB RAM max, if you already have maximum RAM.

• Satellite 1800-700 and DVDRW DRIVE SD-R6472

  I SEE THE FORUM below OF MAY 2005:

  ================================================== =============================

  Satellite 1800-100 and SD-R6472
  Posted the: 4 May 05 07:19

  lafundacion
  Messages: 6
  Join date: 4 May 05

  Hi all.

  I have a Satellite 1800-100 and I want to change the cd-rom included with a DVD - RW unit toshiba SD-R6472 drive, but then the BIOS not reconigze, shows "IDE #1 ERROR" and deactivates the device.

  That's happened? can I mount the new unit?

  I thank very you much.
  David

  ================================================== =============================

  lafundacion
  Messages: 6
  Join date: 4 May 05
  Re: Satellite 1800-100 and SD-R6472
  Posted the: 1 June 05 09:36

  I fix my problem with sd-r6472 change c - salt for slave, with this program:

  http://www.movies-to-DVD.com/Toshiba.html

  Replaces TU51(C-sel) TR51 (Slave) firmware.
  More info in this forum (is the Czech language)
  http://www.czechcomputer.cz/disc_doc-PB6D243954406911AC1256FBC007CE118.html

  Now works perfectly with my toshiba satellite 1800-100

  Thank you.
  Bye
  ================================================== =============================

  QUESTION:

  I have a Satellite 1800-700. The SD - R6472 DVD - RW drive will be compatible with this model and the program: www.movies-to-dvd.com/toshiba.html work?

  Thank you

  Leon

  ================================================== ==============================

  Hello

  I think that if the drive works in the 1800-100, it should also work in the 1800-700. There are only a few different specifications, which has no effect on this.

  Good bye

• Satellite 1800-700 someone updated for windows XP?

  I want to upgrade to XP so that I can use my ipod software. Has anyone tried this before? If so, were there problems?

  Hello

  Satellite 1800 is pre-installed with Windows ME, but on the download from Toshiba site you can find a lot of drivers for Windows XP Home edition operating system. In my opinion, it should work without any problems. Check it please on http://eu.computers.toshiba-europe.com topic support & downloads. It is possible that there are some problems after installing SP2.

• Satellite Pro L300 - problem for Installation of Windows XP SP2

  I bought a Toshiba Satellite Pro L300-164 without BONES. When I tired to a software install Windows XP Professional genuine, it gives a message "Setup did not find units of hard disk installed in your computer".

  Repeated trial gives the same message. BIOS showing the hard drive. Can someone help me to set up Windows XP?
  Thanks in advance
  Hari

  Hello

  Start-up of facilities you have to load the SATA driver. I think that your laptop has a Chipset Mobile Intel® GL960 Express with code CrestlineGM + ICH8-M name.

  When WXP facilities charge ICH8 SATA driver. You can find it under http://support1.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip

  Please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787&tstart=0
  There is an interesting discussion about the installation of Windows XP Sp2 home edition.

• Failed installation of Windows Genuine Advantage Notification (KB949810)

  After many months of Windows & Office updates there is failure of the last update, installation of Windows Genuine Advantage Notification (KB949810) - OGA notice 2.0.0048.0. Since of attempts by Windows updates to install OGA 2.0.0048.0 reviews all the time, but it fails with one "Installation failed" message in the error log.

  I already tried to install notice of OGA 2.0.0048.1.0 by folloing the instruction provided here:
  http://social.answers.Microsoft.com/forums/en-us/OfficeInstall/thread/3f9f11fa-b4c8-436C-9c32-d696dbc8cf15

  In addition, I tried running manual setup, after I disabled the scanner in real-time of the Norman Virus Control. No other AV tool is installed.

  KB949810 is an optional update. As long as you have been able to validate your installation of Office by clicking on the button post Office on thishttp://www.microsoft.com/genuine/page, do not hesitate to hide KB949810.

  HOW to hide an update or restore a hidden Update [good for Win7 & Vista]
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• delete the partition after a failed installation of windows 10

  Hello world

  How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

  So I made a failure (several) attempts to install windows 10 on my new iMAC.

  I could download an ISO of windows and start the bootcamp assistant.

  In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

  I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

  Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

  Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

  I was unable to delete the Mac partition.

  Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

  However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

  Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

  So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

  any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

  concerning

  Evan

  1. your iMac has a Fusion drive?

  2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

  3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

  4 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Satellite M50D - A - 10 L - installation of Windows 7 UEFI

  I m trying to install Windows 7 on TOSHIBA Satellite M50D - A - 10 L with UEFI boot.

  First time I used facility with CSM Boot EFI and it worked fine.

  But after I tried to spend in UEFI and make the installation of UEFI, whenever it starts loading setup files and after freez windows on "Starting Windows" screen.

  I have two pieces of these ultrabooks and they do the same thing.

  I used Flash disk, USB CD-ROM, two different versions of windows 7, but it have same endpoint...

  Secure boot is disabled

  I've got a Satellite M50 - A model (its similar to the M50D-A, but it was equipped with instead of ATI GPU nVidia GPU) and able to install the Windows 7 change the start mode MSC mode.

  Generally the UEFI boot mode can only be used for the system support UEFI as Win 8 or 8.1 win and some Linux distributions.
  Win 7 isn't taking system support UEFI.

  However, there are various workarounds to install Win 7 64 bit (not 32-bit) in the UEFI using the partitionstable GUID (GPT). Win 7 64 bit only contains the UEFI boot loader.

  But, very important is that UEFI installation isn t available (by default) is booting from USB due to lack of uefi boot loader! In case you use the key of USB for installation, you must add the UEFI (search in google for details) Start menu.

  Finally and above all depends on BIOS support in the case where the BIOS would only mode Setup CSM; all of these solutions workaround would be unnecessary.

• Satellite P750-12 t - new installation of Windows 7

  I have a P750 Satellite that has been used by my children for the game - Windows 7 is pre-installed. Now, I want to install Windows 7 again to have a new and good system. I don't have any Windows installation media has been pre-installed, and I don't have an idea how to proceed. Any help welcome.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  You will find a step by step description how install the original recovery image using disk HARD recovery option.

  In any case, if your laptop is always original OS preinstalled before starting with the installation of HARD drive recovery that I recommend you to create DVDs from recovery to the preinstalled using Toshiba Recovery Disk Creator.

  I hope that you will be able to create these disks. If something goes wrong with the HARD drive recovery facility, you can use these disks and install original recovery image.
  If you have any other questions you are welcome.

• Re: Satellite L450D - blue screen during installation of Windows XP

  Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation.

  I installed the new HARD drive and began to install XP. Implementation of process gets to the point where windows will write the files to the HARD drive and the blue screen appears! What is a SATA driver problem?

  Have tried with a copy of XP, I with the SATA drivers on it but don't know if it's a problem of controller or a specific driver from Toshiba.

  Any help would be appreciated... TIA

  Hey,.

  As you can read in 100 other discussions here in the forum, the problem is the SATA driver you need.
  As far as I know Satellite L450D a AMD chipset, so you can find the SATA driver in the display driver package that you can download from the official website of Toshiba.

  In addition, I would recommend reading the other discussions here in the forum. You can also read the son of other laptop models, it s always

• Failed installation of Windows XP on the laptop replacement

  I replaced my old machine with an Acer netbook and load my version of Windows XP on it. I have uninstalled from original machine, but implemented on netbook fails with STOP 0x0000007B. I think it is because the installation cd/dvd is an original version, as my investigations imply that it works with SP3. How can I get a cd/dvd containing the SP3 to replace my original cd/dvd?

  Cool. You are welcome!

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77

• Satellite L750 - cannot complete the installation of Windows

  Just bought new computer initial sart upward and installing Windows.

  Get the loop of the error. "The computer started unexpextedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart, then restart the installation. Whenever I click ok to install Windows error reappears.
  Cannot install Windows.

  Maybe the computer back and get a new one?

  Hey,.

  You can already access the Windows Advanced Boot menu and start the recovery of disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Otherwise I agree with and you must return the phone and ask for a replacement. These things shouldn't t generally occur on output from the computer to the box. I m sure that the store will replace it for free. ;)

• Failed Installation of Windows Server 2008.

  Hey,.

  I recently tried to install Windows Server 2008 on ESXi 4.0.0 (revision 1).

  The installation went all the way until they have to 'Finish installation', how come wrong stop installation.

  "Setup.exe - bad image".

  

  After that, another windows came up saying that windows could not be configured for use on the hardware in my server.

  Could someone advise me to solve this?

  Thank you.

  Oliver.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.