Satellite 1800 - 752S does not load Windowx XP in the beginning upward

Good day to you all,.
While I worked with the software 'Money', suddenly the "Hourglass" was released on the screen for a few seconds and the machine frooze.
Impossible to do anything to stop it with the start/stop button.
Sart up even once, windowz XP will not load and a message comes on the screen and read follow:

First: tomorrow contact Toshiba,
The latter: press f12 for the boot device selection menu (anything happen with this function)
Then the following are displayed:
Version Intel boot agent 4.0.18
Copyright (C) 1997-2001 Intel corporation
PXE - E61: media test failure, check cable of
PXE - MOF: exit intel PXE rom
Insert system disk in drive
Press any key when ready
What is happenning, I do not have a system disk, but only the recovery cd, I would like to know what I need to do and what is the procedure?

Thank you very much for her
See you all and best regards

JCP

Hi James,

The message you describe indicates that your laptop is trying to boot from a connection to the local network. Normally, this is the last set in your BIOS selectable boot devices. The usual order is to have the HARD drive first followed by the CD and then the LAN option (it can also be a floppy drive in there too).

If your defined boot device selection command is similar to the above it would indicate that your laptop has been unable to boot from your hard drive and since he was probably not a CD or DVD in place at the time where he then tried to boot from the local network as the last option available.

If you turn on your laptop and then hold down the F12 key until the phone beeps you should be able to see the boot device selection screen. If the sequence shows the HARD drive of first or second in the list, then I think that your hard drive may have failed and the unit can charge is no longer the operating system of it. In this case, you can try to boot from your recovery CD by loading the CD and then turn your laptop while now the key 'C' until the machine beeps.

Kind regards

Tags: Toshiba

Similar Questions

  • Satellite A300 PSAG8E does not load

    I have a Toshiba Satalite A300 PSAG8E, which does not load.
    I was given a few days ago by a person stating that he is not working or light - vague details.

    At the reception that he turned on, asked to start windows normally or not, then started absolutely perfect, it powered by the charger, no problem.

    I let him on during some time different tasks.
    I came to him a few days later to find that he had himself set to off.

    I enabled again, how he asked to start windows normally or not. I started normally, and it came on the property.
    Since then I could not to power it on the sector.

    Why not load it now?

    Hi mate

    > Since I could not to power it on the sector.
    > Why didn't he care now?

    I m a bit but confused. What's wrong now? You are not able to feed the device or battery is not charging?

    If you are not able to turn on the unit, then you should try this:
    -Disconnect the battery and AC adapter
    -wait a while (2-3 hours)
    -connect the two parties to laptop and check again

    If your battery does not load:
    Try to update the BIOS and set its default value
    If that does not help, then the battery should be checked
    If the new battery does not solve the problem, then the motherboard must be checked and replaced if necessary.

  • Satellite Pro A200 does not load if current enforcement

    Hello

    I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
    It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

    This means that the battery is sinking and ended up to be recharged so just off the coast.
    When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
    At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

    Can anyone offer a solution?

    Thank you

    That s very strange and I guess that this problem could be linked to the hardware problem.
    Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
    In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
    This test can be performed by a technician of the ASP.
    That is why it s advisable to contact an ASP in your country for audits.

    This is a new laptop and warranty should cover everything!

  • Satellite A300-288 does not load the operating system

    Hello everyone.

    Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

    Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

    Thank you very much for your help.

    Start your laptop with F8 and test if you can start the operating system in safe mode.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Flash does not load when you use the standard account in Windows 7

    I use the latest version of Flash on IE9 RC and on some sites, while that connected to Windows 7 (64-bit) as a standard user, does not Flash, but if I go to my Windows 7 Administrator account and go to the very site where the content Flash won't load, it does not load.

    It's Fancast.com on IE9 RC connected with my standard account of Windows 7:

    http://img695.imageshack.us/i/20110224093054.jpg/

    It's Fancast.com on IE9 RC connected with my Windows 7 admin account:

    http://img403.imageshack.us/i/20110224093021.jpg/

    I tried to uninstall and reinstall Flash and disabling hardware acceleration, but nothing happens.

    Flash sites like YouTube videos, no matter which account I'm connected to.

    Also, when I go to NESN.com on IE9 RC in standard mode, content Flash does not load: http://img684.imageshack.us/i/20110224092957.jpg/

    It started happening yesterday when I upgraded to Windows 7 (64-bit) SP1. I don't know if that has anything to do with it, but it was the last major change made to my system.

    Post edited by: A340-600 - Edit to add correct link.

    It's a matter of current Flash, here is your answer

    http://forums.Adobe.com/thread/729200?TSTART=0

  • Satellite 1800-814 does not start after the installation of the software

    Hello
    If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

    Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

    Thanks for your help.

    Hello

    Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

  • Satellite 1800-712 does not start with the new HARD drive

    Hello world.

    I am currently trying to install a new HARD drive in my notebook of 1800-712.
    I'm having a few trubbles as my Satellite won't start with my new HARD drive.

    I upgraded my BIOS to the latest version.
    The new HARD drive is a 40 GB Samsung.

    Any suggestions on what I need to do to make it all works?

    THX, Philippe

    Hello

    This device was shipped with 20 GB HARD drive.
    You again is 40 GB.
    I guess that the BIOS does not recognize the HARD drive because of the size.

  • Satellite 1800-400 does not start, or crashes after upgrading RAM

    I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

    When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

    I removed the new RAM and it works well again.

    What can be the problem:

    (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

    (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

    (3) is there any other problem that I don't have?

    TKS

    Hi Ricardo

    I agree with feliks.
    The module is not compatible and not taken in charge can be responsible for your problem.
    The best way is to use the Toshiba recommended of the memory modules.

  • Satellite 1800-814 does not start if the power adapter is plugged

    Hello
    I have a problem with my 3 year old, 1800-814.
    It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

    Thank you

    Jens Grieger

    Hello

    It could also be something wrong with the electronic power supply on the motherboard.
    It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

  • Satellite 1800-712 does not recognize my USB external HARD drive

    Hello

    I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

    When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

    I tried the external hard drive on a desktop pc and it works fine.

    I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

    Please help and thank you in advance!

    Hello

    Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
    The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
    You have an external power supply for the USB HDD? You should use it.

    Good bye

  • Satellite L300 - Windows does not load

    Laptop Toshiba Satellite L300
    I bought this laptop as a Christmas gift for my son. I don't have the chance to watch it until he caught it so I n t aware that I had to do the recovery disc. Now Windows will not load or repair.

    I have performance of PCs that told me that I needed to contact Toshiba to send me recovery disks. Toshiba confirmed this but will be closed until7/1/2009 and will charge £30 for send me recovery disks.

    Can anyone help me with any solution or if I have to wait then would be what someone knows how it is easy to load the recovery discs as I'm a novice

    Thank you

    Hello!

    You can also get this disc of recovery of an ASP (authorized service provider). Here you can find one:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

    Good bye

  • Satellite L755D-128 does not load

    Hi guys, first thread here. Can't see its been covered yet.

    I live in Greece for a summer season and a few months ago I went to put on (it was low on battery power).
    I plugged in the charger, but has met with no fees or lights or anything. Tried a different outlet, still nothing. I tried several.

    I get a negative reading of 19,28-volt charger, 3.32v with the voltmeter on both terminals battery (laptop upside down) on the right and the first three shorts. If negative is on and in terminal and positive on one of the two most left, he reads a variable less than 1v.
    There is no lights on display and even with the charger and battery removed, nothing.

    Shouldn't it work on only ac? Im a marine engineer can thus weld not etc, but I'm no computer Wizard.
    Does this sound like a problem with one of the processors inside and (probably) of many regulators?

    I'd like to get it going again so I can set the music on my phone outside!

    Cheers for reading, I hope that we can find a solution.

    Best regards, expectantly, George

    Shouldn't it work on only ac?

    Yes, the laptop has no battery if the AC adapter is plugged.
    So even if the battery would be deleted, the laptop should work correctly using the AC adapter.

    I can not tell you what's not here, but the fact is that if the AC adapter is working properly and the laptop does not power upward, then there must be a problem with the internal parts of the laptop as RAM modules, card mother etc...

    Faulty motherboard cannot be resolved (or maybe it could be fixed with a wiring diagram, special tools and enough experience)... Cases of dysfunction of the motherboard, you need to replace it, but it will certainly be a costly affair.

  • Firefox does not load pages unless moves the mouse or keyboard is pressed

    Hello

    I saw this problem listed several times before this post, but none of the solutions have helped me.

    I am using Firefox for ages and the latest 3 updates or so were expose this problem. When I try to load a website, Firefox will start to takes me to the page and then hang. The circle in the tab will stop moving and it will stay there until I move the mouse or press a key on the keyboard. As long as the mouse moves permanently or the keyboard keys are pressed, the page will load very well. The same thing happens with YouTube. The video starts and then freeze unless the keyboard/mouse is moved. Firefox also has this problem when I try to download a file from a Web site. The download starts and then hang on until I move the mouse or press a button, then it will continue for a few seconds and hang on again until I repeat the movement of the mouse or press the keyboard button.

    So far, I tried to update Firefox, Java and Flash; Starting Firefox in Safe Mode; uninstalling and reinstalling Firefox: do a complete uninstall and reinstall of Firefox with removing profile and creation. I ran ad next and malware detection with no infection found tools: Malwarebytes' Anti-Malware, SuperAntispyware, and AdwCleaner scan Microsoft security, Windows Defender, Spybot Search & Destroy, utility Kasperky free Security Scan and Anti-rootkit TDSSKiller.

    The only thing I tried that 'seemed' to work was from Windows Mode safe mode with networking and run Firefox there. I was able to watch YouTube videos without freezing and websites seem to load properly. Of course, I can't run in Mode safe all the time.

    I've attached a screenshot of what it looks like when Firefox crashes on Google News. Note that the images in part loading, but a good number of them is waiting or not loaded.

    I hope someone can help me, because I like Firefox and I wouldn't switch to Chrome or (shudder) IE.

    Thank you in advance for your help!


  • IPad does not load second page on the internet

    When I go to Internet search on my Ipad browser navigates to the first page OK but when I try to choose a location in the list of possible sites the browser does not open it. I tried different browsers and I tried to reset all my settings network and the Ipad itself. I tried to change the settings of cookies etc. without result. Would appreciate any ideas thanks

    Tap settings > Safari and then tap to clear the history and data from the Web site , and then restart your device and then try to search.

Maybe you are looking for

  • How can I down to create a new paragraph in the signature text?

    I am trying to create a signature with a paragraph break text. Instructions and I find all samples show text where just hit return apparently does the trick, for example: "Thank you, Bill Watson Culver City. When I space down (press return) to a new

  • Blocker does not work after the click of the mouse

    Lately (since Feb) almost all the Web sites I visit issues this popup asking me to participate in a survey of my use and offers a "gift" for taking part. This happens usually after that I click on a link to a secondary page of the site. I tried to ta

  • Equium M40x - no access to D: / drive

    I can't access anything on my D drive.I get a pop saying that:D: / is not accessible.The request could not be performed because of an i/o device error. No matter what I try, nothing seems to help, including uninstalling drivers and restart my laptop.

  • How instaill of recovery on hard drive during the recovery process

    Installed windows update and then computer wouldn't boot.  I am now HP recovery cd back when, so I put in the disk and part of the recovery process was to save photos etc. and the default was to put the info on the D drive called HP_Recovery.  If I o

  • T61: Problems with interruptions material when it's on battery

    Not quite sure, but I was wondering if someone had made the experience. I've recently updated my laptop T61 with the included system update tool. I am fairly regular in my paychecks (two week or so)... and I've noticed a disturbing behavior after upd