Satellite 1800-814 does not start after the installation of the software

Similar Questions

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Satellite A200-1If does not start after the BIOS update

  Hello

  It is my first time on the forum posting, I hope someone can help me.
  I recently downloaded the latest update of the Bios (bios - 20090121132526.zip) for my laptop. I ran the bios Setup, after the update it restarted my laptop, but then he went to a black screen and no longer start.
  When I press the power button only power led lights, fans begin to turn and the DVD - rom turns and stops and the screen is blank.
  I am running Vista Home premium 32-bit.

  Can anyone provide a solution on what I can do to fix this?

  Was the system standby standby/extended/recovery?

  Its important to cold starts of the system before and after an update of the BIOS.

  You could try to remove one of the modules RAM (change RAM size) and turn on, otherwise the system may need to be sent to an ASP for repair.

• Satellite L10-104 does not start after the battery totally empty

  Hello

  After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

  Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

  Does anyone have ideas, what I could do to make it work again?

  Thank you

  Christian

  Hello

  Remove the battery and unplug the AC adapter from the laptop.
  Wait a little (1 hour) and then reconnect the two parts.
  Then try turning on the laptop computer. Maybe it helps

  If this will not help, then a hardware problem might be possible
  In this case the RAM modules must be verified in the first step.

  See you soon

• Satellite A40-231 does not start after the incorrect firmware update

  Hello
  I have a toshiba satellite a40 - 231.it unbootable because I flashed it's drive(sdr-6112) dvd - rw with the wrong firmware and I also made a mistake in making a non bootable back active partition, try to Flash the correct firmware. So my question is: can I boot from the usb flash drive? I think it's the only option I have left, if not network startup.

  Thanks in advance!

  Hello

  As far as I know it of not possible to start other devices from the USB FDD / HDD / CD-ROM / LAN

  You can boot from network, but if you want to install the OS via the LAN you will need a RIS server. But it's not easy to do without any additional experience. So I think that this option isn't for you.

  It seems that the drive is dead or is malfunctioning and that is why the best idea is to replace the device's drive. I know, it's hard to hear that, but I don't see any other solution

• Re: Satellite A200-1AX does not start after the BIOS update

  Hi all!

  I wanted to install XP on a Satellite A200-1AX.
  So I tried to update the Bios to the version that supports supported XP.

  When I tried to install it, crashed Vista and now the laptop won't even turn on.

  When I keep the power button pressed, the whistling fan but nothing happens.
  I think the BIOS is gone or corrupted.

  What should I do?
  Thanks in advance for any help!

  > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

  What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

  In this case, you can do anything you will need to contact the ASP in your country for a fix!

  Don t waste time and ask a technician for assistance.

  Good luck and best regards

• Satellite C660D-104 does not start after the BIOS update

  Hello

  I installed the latest version of the bios on my computer Satellite C660D-104, but it has not restarted.

  Where is the place to do a reset?

  Under the ram I have any triple x or B499

  I can not find, can you help me please?

  Thank you

  BIOS update has not this means that the ROM module (where the BIOS is stored) isn t flashed properly.
  As far as I know that this problem could be solved by flashing module ROM using Toshiba BIOS disk of the crisis.
  I guess Toshiba authorized service provider to have this disc of crisis and able to reflash the ROM

• Satellite L500D PSLK0A does not start after the Bios Update

  I've had trouble with an "(ne répond pas) error ' while I was on IE8, so I looked up a few forums that all suggested I go to the manufacturers website and update the drivers for my computer."

  So I logged on the site of Toshiba Australia, put in all my details model numbers and a list of updates came.
  Great, I thought.

  1 was an upgrade of the Bios, so I clicked on the link and let the machine do its thing.
  Now I can't start my machine.

  How can I fix it? Can I downgrade my bios to what it was?

  Thank you

  Hello

  If your laptop isn't the answer (I mean you won't see anything on the screen) then this means that your updates to the BIOS in the wrong way.
  This means the module ROM BIOS was flashed note correctly.

  In this case, you will need professional help to an ASP in your country.

  Good luck

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027