Satellite 1805-S204 - does not start a DVD

Similar Questions

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Satellite 1805-204 does not start

  Computer laptop just down one day, said the motherboard was the question replacing the motherboard with a new Board of Directors. Always the same thing.

  Green power lights, LCD begins lights HD then stops. Then maybe two or three hours or days before able to get that much. Replace the CPU & fan climb too. Almost brand new. Please, any help would be great. Support where I bought the jury does not return calls or e-mail, won't throw $ 150.00 at the door. Check the power pack.

  Thanks in advance.

  Hello

  First of all, you should tell us what laptop, you have exactly. The! 805 204 does not know me do you mean Satellite 1805-204?

  OK, the motherboard has been exchanged and also CPU. I m right?
  It's really hard to say why laptop stops itself but perhaps the new mother card is too bad and you're lucky just bald.
  In addition, perhaps he could a problem with the AC adapter. If you can try another adapter, check this please!

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite P200-143 does not start

  My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

  I tried to take out the battery for the afternoon, but no effect

  Any suggestions?

  P

  It looks like a dead last.
  The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

  Good luck

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• SOLVED: Why don't Satellite 4090XCDT does not start with DVD-R/W drive?

  Hello
  as I said in the other thread that has already been closed, I bought a used Satellite phone who would not start of 3rd party DVD - RW (Quanta Storage SDW-042) included, even if Windows couldn't read well enough.

  I found out why, starting with the help of the user answers in the other thread.

  In the user manual, there is a description in the capitel on the configuration of the system about tconfig, which proved to be a valuable indication: HDD = Primary IDE (1F0H/IRQ14) (...), CD = secondary IDE (170 H/IRQ15). Compared to my desktop, it seems to me that two readers need to be masters on no. 1 and no. 2 cable, not as master and slave on the same cable from HARD drive. So, my CD-ROM would probably be master.
  Then I did the research further into the issue and found out, that there is no CD-ROM where select things cable if they are master or slave. Then I found in
  http://www.dschen.de/laptop_brenner/ a note in his Toshiba Satellite Pro 4290, seemed to be no Cable Select and his planned book on the CD (or DVD player, he wants to use) as a master.
  CSEL means that 47 Pin is connected to the Earth, which he did by applying a drop of Tin from Pin 47 to 49, pine, which is also Pin 47. I tried the same thing and disassembled the DVD drive that was in my notebook. (My record to disassemble my laptop and all editing again properly is now gone in 50 minutes). And know what, my Satellite 4090XCDT can now boot from the DVD-RW!

  To perform the task, I needed a screwdriver of the watchmaker to open the DVD RW (three live, then you need to insert a PIN to open the tray and see the back), a 12 Volt type iron pin solder for SMD and I ordered the strap of welding with a stereo microscope, so this task is not negligible. See the link mentioned to know what pins are bridged (sorry, the website is in German but the picture is clear: in the top row of pines, only you can see, the 2nd and the third from the right). And of course with a replacement part "scrap", you could give your laptop a second life, but you run a risk, because you may not know what you have, master or slave (for firmware or hardware), broken in any case, select cable - and one other Web site indicates that they looked up to 17 variants of firmware in exactly the same drive , depending on what laptop, it was intended for use.

  Nice display. Thank you very much.

• Satellite P840/016 does not start a CD or DVD

  F2 using activated BIOS to boot from the optical drive, backed up and restarted. Find the CD created bootable from the same laptop computer using the recovery of Windows 7 repair disc but will not start.

  Tried the Ubuntu DVD that works like on all other laptops boot disk - still does not start.

  Changed the setting in the BIOS for non-secure - same problem.

  When you start your laptop press F12 to get into the boot menu. Place the bootable disc into the optical disc drive. Choose the CD/DVD device from the list in the menu and press ENTER.

  It work?

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• My Satellite 1405-s151 does not start

  Soory for my poor English
  my laptop does not start. When I press the button, the power turns on (green light) but nothing else happens. the screen, the CD-ROM drive does not work. Sometimes, the fan runs.

  Sometimes when I turn on the laptop it works but rarely

  I tried to remove the battery but nothing

  Please help me

  Is it possible to be the motherboard? I ask this because sometimes he dot.

  I would also like to know how to boot from a cdrom drive external usb?

  Thank you very much

  Hello

  This does not seem very well! Would you see the Toshiba logo red when you try to start because when you do not see the Toshiba logo there is a failure that is quite sure of the hardwaree!

  How long it works when it is started?

  Have you changed any hardware in the past?

  Tips: Your Satellite 1405-S151 is an American model.

  So if you want to install drivers or to do a BIOS update to go to the following site

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?MOID=&hideModName=true&BV_Session ID=@@@1329406085.1096615446@@@&BV_EngineID=cccea dcmjdkdldecgfkceghdgngdgnj.0

  To bye chris

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.