Satellite 1900-303: DVD/CDRW (SD-R2212) does not work

Similar Questions

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• CD-RW/DVD-romDrive sd-R2212 does not work with 6050?

  Hello

  I bought a combodrive 2212 but my pro 6050 does not recognize this drive. What can I do?

  I hope that there is someone who can help me.

  Peter

  Hi Peter,.

  That's the typical problem of many users of portable computers. Each combodrive can t work correctly with each laptop model because Toshiba built in devices of different producers. He has above all a problem of compatibility.

  In my opinion, you have two options to solve this case. You can restore device or if you want to keep this combodrive, you can buy box of external device and connect with USB 2.0 or firewire.

  Good luck

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Satellite M40-185: DVD super multi drive does not read the CD

  I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
  When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

  However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
  Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
  I wonder if his software level problem.

  I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

  Maybe it s only a registry error?
  I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

  For more information, see this page of Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop

  Good luck

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite P50-A-144 - FN + z key does not work after update Win8.1

  Hello
  a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
  Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

  How could I solve this problem? It's my OCD tingle.

  Thanks for all the replies :D

  Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

  I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

  You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• DVD Player & touch screen does not work after last update DX1210 to Windows 8

  Hello
  I know. I should have checked the upgrade information before doing so, but I have upgraded to Windows 8 about 3 months ago and my DVD player and touchscreen no longer work. I don't know what else does not work.

  I searched drivers but can't seem to find a.

  Can someone point me to the right direction?

  Or do I restore to original settings - Windows 7?

  Which brings me to my second question. How to restore? I did not have a backup, but I left all my data on a hard drive.

  I can't find any help on any of these challenges.

  Thanks in advance.

  To be honest that I n t have this unit and don t have experience with it but I ve checked Toshiba to THE support page and of course, this model is not supported for Win8. What you need are utilities and tools specific to Toshiba.

  In my opinion, if the device is not fully supported you should go back to original Win7 and supported.
  I put t know why you didn t follow the Toshiba s advice on the creation of recovery media. From my experience, that the recorded data are unnecessary, and you will not be able to start the recovery image installation.

  What you need now is the recovery disk. Visit the Toshiba page if there is possibility to order a new. Otherwise contact the closest service Toshiba and ask if they can help you with this.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Satellite L40 - 16 d and WXP - WLAN does not work

  After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

  maybey upgreate BIOS solve the problem?
  the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

  Anyone know?

  > bios maybey upgreate solve the problem?

  Update the BIOS?
  Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

  I think that you have not installed the right WLan driver.

  Satellite L40 - 16 d belongs to the series of PSL48.
  The drivers are available on the page of the Toshiba UE driver:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
  Note: You must select Archive first Optional product Type

  In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite M70 - 170 - Touch and the launch does not work

  Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

  I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

  I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

  Can you explain why?

  I love this commercial and I want to know why it does not work.

  I put t know why the touch & launch does not work, but I would try to reinstall again.
  The Touch & launch is placed on the European driver Toshiba page.
  This time it s a v 1.2.9.0 for Win XP.

  Uninstall first touch & launch and after restarting again install it again!

• Key satellite L510-S401-touchpad FN and F9 does not work under win xp

  Toshiba user,

  I have recently purchase a toshiba Satellite L510-S401and I install windows xp
  and my problem does not have the FN key. I have install all the drivers that I think useful, but still does not work...

  If anyone has had a driver for Satellite L510-S401, that works with Windows XP, please contact me with the help of this thread.

  Yours sincerely.

  Hello

  It is not easy to help. I don't know in which country you bought this laptop and where to look for drivers.
  The fact is that the FN + F9 key combination works if utility to toggle the Touchpad is installed.
  Have you checked Toshiba support for this tool page?
  Which page you have downloaded all the drivers for Windows XP Home edition?