Satellite 1900 (PS192E) - does not recognize the CD/DVD

Hey all,.

I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

If there is someone out there who could give me some advice, I would be extremely grateful.

Thank you very much

James

Advertisement

Hello

OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
What version of Windows is it?

If you want to install a driver for the graphics card go into Device Manager and select Update driver.

Tags: Toshiba

Similar Questions

  • Satellite C series does not recognize the CD/DVD drive

    Hello

    I have about a week he did something wrong and now my laptop recognize my CD-Rom drive.
    I guess I accidentally deleted the driver but I'm not sure of (I'm not a computer expert).
    What now? Someone has an idea?

    Thank you!

    Carina

    + The message was edited: translated by Google Translator.

    Hello

    I guess that you do not see the CD/DVD drive in MY computer area.
    Right?

    I think I can help you
    First go to Device Manager and search for CD/DVD drive.
    Select this device and delete it from the list.

    Now, open the registry (type regedit in the search) and remove the filters above and below to the following registry key:
    HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet\Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

    The similar solution is located on the Microsoft page:
    http://support.Microsoft.com/kb/314060

  • Satellite Pro A60 does not recognize the accept/DVDs blank

    My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

    In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

    My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

    Help please!

    Post edited by: EDS

    Hello

    Have you also tried to burn DVD-R discs?
    I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

    I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

    Also check the Toshiba page for an update of the firmware!

  • Satellite C650 - 1 CT does not recognize the CD/DVD

    Hello

    I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

    Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

    System details:

    Satellite C650-1 CT PSC08E-03M001EN
    OS: Windows 7 64-bit
    Place/country: United Kingdom

    Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

    Thank you
    Lamin

    Post edited by: jammehkunda

    As first step try please remove the optical disc drive from Device Manager and restart your laptop.
    After doing this review please the Device Manager and let us know if the problem persists.

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • Computer does not recognize the CD/DVD drive

    For these last days, my computer does not recognize the CD/DVD drive.  I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs.  However, the computer does not recognize this drive.  I also wonder if it is a hardware problem.  The light on the drive is a constant in green, and does not have the Open button.  And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc.  Please advise...

    I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard.  You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/

    There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.

  • Dell Inspiron 17R does not recognize the cd/dvd drive

    I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!

    I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?

    Thanks in advance!

    Hello

    See if that helps you.

    There is a "Fix - it" Microsoft for your problem on this link

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    If above doesn't fix it, continue with the help of Microsoft:

    http://support.Microsoft.com/kb/982116/en-us

    See you soon.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • Satellite L30-105 does not recognize the 1 GB of additional RAM

    Hi there I hope someone can help me

    I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
    and it's terribly slow with vista, not to mention programs.
    The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

    However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

    The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

    Are limited to only some of the Satellite of RAM?
    The old subjects indicate if kingston does not work try corsair.
    Other topics suggested to change slots
    Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

    Can anyone help? everyone knows about similar problems?

    I will not buy any more RAM to try different brands for the same issue to occur

    Hello

    The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

    > Why the RAM 1 GB module cannot be recognized?
    Perhaps the two modules are not compatible with each other
    I would recommend using two identical modules of the same manufacturing
    I use Kingston modules, they are ok for me

  • Satellite A200-1AE does not recognize the USB 2.0 flash drive

    I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
    The same USB works without problem on other computers with vista!

    Someone knows what to do?

    Hello

    First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
    After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

    Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

    Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

    Best regards

  • Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

    After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

    Laptop is only a few months old.
    Have you tried the Toshiba check system - it ignores DVD disk check.
    Tried Windows Update - does not help.
    Tried registry fix - does not help.

    Cannot use the CD to reinstall all drivers - because it is not recognized.
    The DVD drive LED is on. If the disk looks ok physically.

    Does anyone have an idea what to do?

    Very strange what s
    Try this:

    Access the BIOS and set the default settings and save the changes.
    If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

    You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

    Good luck my friend

  • Satellite L30-113 does not recognize the two modules DIMM RAM

    Hello

    I have a Toshiba laptop Satellite L30 113.
    It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
    It's DDR2 553 MHZ (PC4200.

    The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

    Did I miss something?
    They should be the same size as in the bad old days?
    What is going on?

    Thank you

    Adam

    > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
    Seems that the two RAM modules are not completely compatible...
    I've read several times on these issues and to be honest it s are not uncommon

    I advise you to buy two identical RAM modules ad then to try again

    I'm afraid there is no other solution for your problem of m.

  • Satellite L655 sometimes does not recognize the wireless card

    I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

    The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
    Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

    Under network card it has only ethernet. Its as if it does not exist.
    Basically the way to solve this problem is by restarting simply my computer until he figures it.
    Sometimes, it can take 5 or more times.

    Any help please?

    Hello

    What satellite L655-xxx you have exactly?
    As far as I know there are different models with different wireless network cards.

    Your BIOS is up to date? Please check this box.

    So now to a few proposals of solution:
    First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
    In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

  • Satellite A300-1J1 - does not recognize the CD key

    Hi all, after 3 days of searching for any type of information I've found this site and I hope that someone can help me.

    I have a Satellite A300-1J1, and had to do a complete reinstall of Windows using my recovery disk that was provided with the laptop (Vista Home Premium).
    In any case, the installation went well and he had restarted and said I had to activate Windows is not a problem, I thought looked under laptop for key typed in there and it will not recognize the CD as being for Vista Premium key. Now how is that possible that the disc that came with the laptop and the CD key is there?

    Any help is greatly appreciated

    Shaun

    Hello Shaun

    I know it may seem stupid now, but your story is somewhat strange. Why?
    To the first Satellite A300 laptop computers are never shipped with recovery DVDs. Recovery DVDs must be created by the owner of the laptop. All A300 laptop come with what is called HARD disk image. AFAIK some A300 laptop computers come with an additional CD/DVD but it is recovery of Windows XP Home or Vista 64-bit edition, but laptop always comes with Vista Home Premium 32 - bit (recovery of HARD drive image).

    So the question is what installation media you are using exactly? Is - this support recovery, that you created yourself or a version of Microsoft?
    Original Toshiba recovery image is created for each laptop model separately and should not be enabled.

    Recovery image can not be downloaded. If you want to have another copy, you must order it under https://backupmedia.toshiba.eu/landing.aspx

  • My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

    Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

    Hello

    Perform the following methods and check if it helps.

     

    Method 1:

    Please run the difficulty of following article and check if that helps.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

     

    Method 2:

    You can read the following article to see what might cause this problem.

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    http://support.Microsoft.com/kb/939052/en-us

    If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

     

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    http://support.Microsoft.com/kb/929461/en-us

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/  

    Hope this information is useful.

Maybe you are looking for

  • HP photosmart C4680: reinstallation of HP photosmart C4680

    I have the installation cd but it does not give me the option to install.  I am trying to install on my new ASUS X751LN computer that has Microsoft Windows 8.1 (although I said 64-bit I don't know this!) What can I do to install my printer/scanner pl

  • Ghdstartval-ChenLingGenImp

    Hello I want to create a few horizontal curves/lines; the value of each row is different and given through SOUTH and the user entry/setting Call the ChnLinGenImp ("upper meadow" ", 200, ghdstartval, 0," "" ") Call View.Sheets ("Blatt 1"). Areas ("are

  • protect the smart HP: long dst

    Hello: -chek smart = passed -summer long time = failure -failure ID: RXL6MF-6MJ6NO-MFPX1F-61F703 -product id = C3N01EA #ABZ hard disk1 my hard drive crashed? Thank you in advance.

  • Lenovo ThinkPad2 settings problem

    Hi, I installed the Lenovo settings app metro v1.1.0.10585 and section "Mobile hotspot" is missing. Someone help please!

  • Why my poster Task Manager my CPU 100% busy so no or few applications is running?

    Why my poster Task Manager my CPU 100% busy so no or few applications is running? In particular the process explorer.exe (the OS) occupies CPU resourses. Thank you very much Angelo