Satellite 1905-S303 PCI Wireless card does not start code 10

I put a PCI BCM94306PM broadcom wireless card in my laptop. The laptop is equipped with led however one is damaged and can not be connected, these cards may work with only one side and I even read somewhere that they can work on a short range with no led. My problem is the Device Manager indicates that the device cannot start code 10. I have a fresh install of XP Pro SP1 (not from the original restore disk). With this in mind, I think there must be some Toshiba utility or the missing driver to allow the map to work. Any help appreciated.

Hello

Code 10 means that it is not present, not working not properly, or does not have all the drivers installed.
In this case you need to download the latest driver on Toshiba website and install it.

Best regards

Tags: Toshiba

Similar Questions

  • Satellite 1905-S301: internal WiFi card does not

    I have a Satellite 1905-S301 laptop. I just bought a new Intel Pro/Wireless Mini PCI WiFi card because I discovered that my laptop is WiFi active (I have had it for two years and did not know this).
    I installed the card, attached to the antenna to it and installed the software. The computer recognises the card, but he won't find not all networks that are out there and it gives me the error that I need to turn on the hardware for the WiFi switch, even when it is turned on.

    Anyone have any ideas?
    DJ

    Hello

    On the right side of the laptop, you should find a WLan hardware switch.
    It must be on the use of the Wlan card.
    Also, try to use the FN + F8 key combination to activate the Wlan antenna.

  • Satellite L300-17N (PSLBCE) - wireless card does not work

    Hello

    I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

    No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
    May this be a conflict with the other dirvers or WXP PRO SP2?

    Thank you

    Hey Buddy

    Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

    I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

    I would appreciate your comments

  • Satellite P850-133 - extended graphics card does not work

    Hello!

    I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.

    Hello

    The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
    The European driver Toshiba page provides 3 different display drivers.

    2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 8.15.10.2712).
    You must install the Intel driver and one of the nVidia drivers.

  • Satellite C55 - Has - 1 L 0 does not start in Windows 8

    Hey guys.
    I hope you can help me a bit.
    I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

    I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

    I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
    I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

    So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
    Is my HARD drive broken? Can I try something else?

    Thank you very much!

    You are right. This issue should be fixed by the authorized service provider.
    Furthermore, why do some risk steps to check this problem, if the warranty is valid.
    Warranty will cover the repair costs.

    Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    Good luck.

  • p6745f: new graphics card does not start

    I have a HP P6745f I decided to update my graphics card because the default map is not compatible with Adobe CS6. So I bought a new power supply 600w and a GeForce 750ti. The PSU works fine with the original card, but when I put the new graphics card, the machine does not start. Just of is located on the blue screen and beeps every minute or so.

    I've scoured the forums and tried the bios update, but that did nothing. Any ideas?

    Ericz, welcome to the forum.

    750ti GTX requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer is released in 2011.  The latter does not demand of UEFI cards were 640 GT.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • transfer of data to the sd card does not start

    Hi all
    In the storage of settings on my Xperia Z2 section, there is an option "transfer of data to the sd card. It allows to work very well. Once the internal memory was terribly full, is come to a notification that says "75% full, data transfer to sd card" tried as always but this time it does not start. When I try to run within the parameters, also does not start.
    Any suggestions are appreciated.
    Thank you

    Use the file Commander app > cut > paste > on the SD card.

  • Wireless LAN does not start automatically

    Hey,.

    I have a HP-Compaq CQ60-100ED and my phone does not start automatically.

    If I boot my laptop it comes on when Windows starts, but then stops again.

    I need to push my wireless button 2 times and it works perfectly.

    Also if I close my cover, and then open it again it works without pressing the button.

    It's only when I do a cold start.

    Kind regards

    Kevin Walter

    Hey,.

    I fixed that by installing this driver: http://h30434.www3.hp.com/t5/Wireless-Internet-and-home/Atheros-WLAN-Driver-Fixes-Connection-Issues-With-Linksys-Exxxx/td-p/701407

    Greetz,

    Kevin

  • Satellite Pro 4220 - update the BIOS does not start

    Hello!

    Please, someone tell me what is the problem with the update to v1.60 SP4220 BIOS? It does not start even do it according to instructions.

    I did the following:
    1 download/have unzipped the package v1.60 since the BIOS page on a non-bootable floppy disk empty
    2. put the floppy in the computer
    3. turn on the device with the F12 key

    With a floppy, I got the "non-system disk" error and another with a "EMBRL" error message missing. What is it, I'm not familiar with that one?

    Best regards

    Pete v.

    Hello

    Can I ask why you want to update the BIOS?
    You have problems?
    If the laptop works well the update of the BIOS is not necessary! My laptop is about 6 years old and I have no day BIOS!

    However, I think that you didn't use the right update procedure.
    Please check this document before starting the BIOS update:
    http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

  • Satellite Pro 4600 Wireless card does not work with WIN2K?

    I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

    The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

    But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

    the router works well with other laptops in my house.

    I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

    'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

    What I then please? It works with Win2K, is it "another driver" and so on?

    Thank you

    Hello

    I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
    Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
    Please see this page:
    http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

    In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
    You should check your WLan settings again.

  • Satellite P750 - wireless card does not work

    PSAY3A - 02q 001. Laptop is around the age of 20 months. Turned on this afternoon and the Wireless does not work. Atheros AR9002WB-1NG. Can't b on / off switch material. The switch will beep when pushed. Network troubleshooting indicates the card is not activated. Card is always detected in windows.

    I feel that this indicates that the card has failed. Any thoughts?

    was soon Simon

    > Card is always detected in windows.
    Does that mean exactly?
    WLan is listed in Device Manager?
    And if SO, have you tried reinstalling the WLan driver again?

    If you tried that, do it!
    Uninstall the Wlan driver (in Device Manager), download the latest driver WLan driver Toshiba page, install the driver, reboot the laptop and try to set up the connection.

  • Satellite Pro L300 - wireless card does not work under Ubuntu

    Hi all,

    I want to know what is the model of my wireless card. I need to know because I need the driver of windows for Ubuntu. I see on the internet for the L300 series, we have a lot of wireless card... I want to know what is the card of my pc.

    Thanks a lot and best regards

    LOL: D you're funny type. Please don t do it harder they are.

    There are many opportunities to find out what card WLan has been inserted.

    The easiest way is to check the bottom of the unit.
    There are a lot of different labels and on one of the labels you should see a WLan card model or part number.
    Take this number it in the google search and google for this field.

  • Re: Satellite Pro A60 - PCMCIA WLAN card does not question CardBus

    I received an A60 to upgrade for a friend and one of the necessary things is a wireless card.

    I got a 32-bit cardbus card but when I insert into the laptop, nothing happens. XP does not recognize, the oo lights do not come on the map.
    First I thought it was a faulty card but I tried other cards and get the same results and I reinstalled XP and all the drivers but nothing.

    I've seen other messages on the change of the mode in the BIOS, but there is no mention of the CardBus in the BIOS.
    The laptop uses the BIOS version 1.9. I just want to check is there something escapes me or the CardBus location just does not work?

    Hello

    Satellite Pro A60 was equipped with the 32-bit and 16-bit PCMCIA slot that supports PCMCIA card * Type-II * only!

    Have you used the * PCMCIA Type-II card?

    Perhaps you have used is not compatible PCMCIA card, you should check this first!

  • Satellite L40-18 X - wireless switch does not work

    Hello

    I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

    It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

    Please can someone tell me the possibole solution?

    concerning

    Salahaddin

    Hello

    I agree with resident.
    The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

    The FN + F8 key combination that allows the WLan should work on if install you value added package.

    You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

    See you soon

  • Satellite C660D-10W - 02 wireless broadband does not connect

    Hello.

    I bought a new computer toshiba laptop, its called a Satellite C660D series Satellite C660D - 10W.
    Then I installed the modem 02 top wireless broadband.
    He showed a shortcut for 02broadband on the left side of the desktop.
    So far everything was going perfectly.

    But... then when I double click on the shortcut of 02broadband, 02broadband logo comes as usual, he shows his support for about 30 seconds, but then it says that it cannot detect or unable to connect! I disconnected and then reconnected to broad band several times, but it just keeps saying the same thing.
    There are 3 other laptops in the House and the 02 broadband installed and immediately connected on each of them.

    One of the laptops was just bought 2 hours ago and it installed and connected to broadband right now.
    This laptop from toshibsa is the only one the 02broadband connects not with, but it installs perfectly down to it.
    Its very weird and makes me absolutely nuts.

    Is there anyone else that happened and could it please help?

    Thank you
    brand

    Hello

    There is no module 3G inside the Satellite C660D-10W.
    Did you find the 3G module in Device Manager?
    I guess that you will not find everything and that's why you cannot use the software installed

    This is the reason why it does not work

Maybe you are looking for