Satellite 2400-103 - what is the maximum size of HARD drive?
Nobody knows what the maximum hard disk size is for a Satellite 2400-103? This laptop has a 30GB HARD drive which is complete at the moment and I'm moving to a 160 GB unit.
Used software - DiskCopy - clone Moose 30 GB of cloning to the new 160 GB drive. This creates a partition on the disk that is the same size as the original (about 28GB). If the new hard drive is installed on the laptop at this point, the laptop will be start OK. If I use a partition manager - Partition Magic - to resize the partition to the size of the new disc (about 150 GB) then the laptop does not start.
Would it because there is a limit on the size of the hard disk supported by this laptop?
If so, what is the limit?
Thank you and best regards.
Satellite 2400 is very old notebook, so I think it has a limitation of LBA 28 bits. This means that you can only use up to 128 GB of free space so the maximum capacity of the disc HARD would be 120 GB. So I think that's the reason why the computer laptop can-t start successfully with the 160 GB model.
In your case I bring back the 160 GB model to the computer store and ask one another 120 GB one. It should work normally
My age Satellite Pro 4600 has a 20 GB HARD drive. These are now very difficult to obtain, does anyone know if superior capacy HDDs can be used and, if so, what is the maximum size of the HARD drive.
(Despite his age that I always use the Satellite Pro for some jobs).
Satellite Pro 4600 is old enough for laptop and it is not easy to find the exact info. The fact is that this laptop comes with 10 and 20 GB hard drives.
My opinion is that you can use 30 or even 40 GB HDD. I think that 30 GB new HARD drive should be enough for your some jobs.
What do you think?
What is the maximum size of hard drive, which can be installed in a desktop pavilion d4790y?
It would be a secondary drive, not the boot drive.
The operating system is Vista Home Premium, 32-bit. The version of the BIOS is 5.08.
Are there any changes or upgrades that would allow an internal hard drive 3 TB to install?
Here are the specifications and configurable options for your desktop HP Pavilion d4790y and here are the specifications of its card mother P5BW - THE (Basswood2). Based on the specifications and the age of the computer, I would expect you to use a hard drive 3 TB as a secondary drive on Windows Vista (DISPLACEMENT SP1 or SP2) and Windows 7. Formatted as MBR would require the drive to use with a minimum of two partitions. Formatted as GPT would require only a single partition. In no case will you be able to use the 3 TB as a boot device drive because your computer does not support a UEFI BIOS that allows booting from a GPT formatted disk. No changes or updated should be held.
I recently bought an Equium L20-197 and I thought to install a larger HARD drive.
I wanted to know what the maximum size of HARD drive that can be installed on an Equium L20-197 (I guess it's 120 GB, as it is on the L20-187 but I'm not 100% sure)
I have also been seaching for the IDE drives and found a list of sites who have PATA, ATA100 etc. are also the IDE drives? (I checked the wiki and articles all point Yes, but a little more confirmation would not hurt)
I was also wondering if the HARD drive I install must be brand toshiba (or if it even makes a difference).
Thanking you in advance for any help you can provide.
Equium L20 is very similar to the Satellite L20.
Search here in the forum for similar issues. If you want to use the advanced search option, you will find a few useful headings.
I know, it's that you can use the 40 GB, 60 GB, 80 GB and 100 GB 2.5 IDE HARD drive supporting the UDMA100
I would replace the drive ide 2.5 "on a Satellite S1900-100.
What is the maximum capacity of hard disks in this laptop?
As far as I know this laptop supports the ATA-5 interface and, therefore, it should be possible to use the 120 GB IDE HARD drive as ATA - 5 supports the 28-bit LBA
But to be honest I didn t find details what size HARD drive max can be compatible
I seems that you would have to test
I use a HP dc7600 CMT, which works well after the upgrade to a Samsung 128 GB SSD Intel Pentium D 3.4 GHz, 4 GB of RAM and an AMD Radeon HD 6450. I'm under Win 8.1 Pro x 64, with the most recent upgrade and have absolutely no problem. Now, I want to add a second internal HDD and I wonder what is the maximum size that I can go to. I can't go up to 2 TB, or am I limited to a lower number? 1 TB? 500 GB? 250 GB?
Will be happy to help here, especially if he actually tried to apply in practice.
Thanks in advance.
In theory, you'd be limited to 2 TB.
The biggest HARD drive I have ever installed in my dc7600 CMT was a 1 TB of HDD, so I can't confirm that a 2 TB drive will absolutely work.
My default hard disk is almost full and I plan to update. What is the maximum size that this model could overcome? Very well is 2-3 to?
I replaced my optical drive to a box with a 250 GB SSD HARD drive inside. I installed my new operating system here, and makes the default boot drive. The default value of HARD drive that comes with the laptop is my backup drive. This is configured by okay?
Do I have to put my SSD on the default HARD drive space and put my 2 to/3 TB harddrive on the caddy for maximum performance?
1. in theory, you can get 2 TB or TB but 1 TB has better peformance.
2. you cannot boot from the caddy. My suggestion: use for normal Bay and 2 TB SSDS in the caddy. You both what you want.
3. as (2) above.
I have a laptop Toshiba Satellite L40, model number PSL4CL - 001 with 80 GB HDD (SATA) 00C. I need to buy a new bigger hard drive, but I don't know the maximum size that I can use my laptop?
Can I get a new one with 500 GB or I shouldn't buy one more 250 or 320 GB?
Theoretically, you can buy each HARD drive you want. Your laptop is equipped with a SATA interface for HARD disk and there is no limit of capacity as on the old IDE interface. So, a 500 GB model should work correctly on your laptop.
If you buy a new one make sure that it s a portable 2.5 HARD drive with SATA interface. All that s! :)
I hope I could help a bit.
I want to add a new hard drive to an old laptop Satellite 2610 CDT. However, before buying a new drive, I want to be sure that it will be properly recognized by the BIOS. The operating systems (Win 2000 and Debian) I will use can handle large capacity disks, so that they are not a problem here.
How can I determine the maximum capacity of the hard drive that will be recognized by the BIOS? The BIOS supports LBA-48 address?
Thank you very much!
According to the specifications of the laptop computer supports a 6 GB HARD drive.
You can try with 10 or 12 GB of HARD drive.
These hard drives are cheap and I don't see any risk with the upgrade. Test it!
My hard drive in my Toshiba s1410-604 died :(
How many GB does my phone support?
Can I buy a 100 GB HDD without any problem?
I have this drive in my mind:
Hope someone can understand my question and help me...
As far as I know, this unit was delivered with a 30 GB HARD drive.
In my opinion you unity might work with a 40 GB 60GB but I n t think that the BIOS recognizes a 100 GB HARD drive.
I think that it of not possible to use a 100 GB on this unit.
HARD drive merchants offer a BIOS change. After this change, it should be possible to use a bigger HDD. But these procedures are not supported by Toshiba and it is possible that you will lose coverage.
I understand the internal player on the R100 is an ATA5 (Enhanced IDE), I've only used the IBM (now HGST) readers, they do a decent-sized on ATA6 disc, I guess, it will take the player that will support ATA5 as the controller on the R100 is ATA5 only.
As for the size, what is the maximum size can I ride in this unit?
The orginal is 5.4 width x depth x 7.9 height 8 mm. Can I assume all 1.8 inch drive will fot or is it a mine field?
Thank you very much
AFAIK the R100 was delivered with a 30GB and 40GB HDD.
I found an info that the hard drives are compatible:
HDD1422: Width (mm) 54.0; Height (mm) 5.0 0.15; Depth (mm) 78.5 0.3
MK2003GAH: Width: 54.0, height: 8.0, depth: 78.5
HDD1384: Width: 54.0 0.2, height: 8.0 0.15, depth: 78.5 0.3
HDD1524: Width: 54.0 0.2, height: 8.0 0.15, depth: 78.5 0.3
I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.
I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.
Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?
What is the largest swap HDD that someone did with success on these machines of 4200/4300?
Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.
By the way: 60 GB HARD drive is not sufficient for you?
Y at - it a maximum size of external drive that can be used for the iMac (late 2009 model)?
I believe that the greatest single external drive currently available is 6 TB, but I heard 8 of TB are coming or may even arrived. OS X does not have a capacity limitation on the HD that it can address.
That being said, if you are looking for storage solutions consider something like:
Hello, please help. I have a satellite Pro 4200 with a dead hard drive. I can't get a 10 GB hd anywhere. I can only find 30 and more. Does anyone know the size max HD which can be installed in this system? send me an email: [email protected]
Unfortunately there is no public document on this subject. I'm sure that 20 GB HDD will work correctly. If you want to try to call service partner and ask them. They must have this information.
By the way: as far as I know Toshiba doesn't support the hardware upgrade. This is supported by authorized service partners or independent equipment parts supplier.
I am installing a 2 TB hard drive in a computer a6400f, he said during the installation of Windows 7 windows cannot install with this hardware of computers. The hard drive is recognized in the Bios. I had an old 500 gig and windows installed without any problems.
I don't know how or when it has changed, but the problem was that, in the BIOS, the interface has been set to Raid and IDE not. Why someone knew about it?
Maybe you are looking for
I am running Firefox v32.0.3 and Flash v18.104.22.168Whenever I visit a site that has Flash content flash crashes. This is error information: Signature of the problem: Problem Event Name: APPCRASH Application Name: FlashPlayerPlugin_15_0_0_152.exe Appli
I changed my Apple ID successfully with my new password under the account of my identifying Apple, but my old ID Apple is constantly on my IPhone and IPad and leaves me not update my applications... because my old ID Apple keeps coming back. Yes, I c
I have an iphone 6 and before the error 53, today I tried to update to ios 9.3 and get an error, I don't want to do the update with the cause of the computer I'm afraid that my iphone will get again in brick, so I'm hopping apple realizes issue and l
Hi all I have a laptop which is a Toshiba A-Series and a few days ago, I had a problem on my laptop. Then I decidec to format my laptop Toshiba using Windows XP CD then there arrived a few steps, it gives the following error message: Setup did not fi
Could someone help me, I'm doing a chart that can handle more than 1 field and updates in real time, has a buffer and allows to scroll back so that it runs without the cursor of the x axis back flip to the prior of the x-axis when you release the mou