Satellite 2410-404: mini pc card no longer works

Hello

I have a Satellite 2410-404 with mini pc installed wireless lan card, allowing to work perfectly - up to a few days ago, I installed a pcmcia by levelone wireless network card, just to check if it worked. This was the case, and so I uninstalled the card and the software that came with it. But now my toshiba mini wlan card no longer works! It is actually recognized and installed by the system and shown as being active - but I do not get a connection to wifi even when there is certainly one around. I can't even bring up the list of WLAN networks available (win xp) that normally you can even if there's no matter what available wlan.

I checked the registry and found several remaining entries by levelone... but dare not change or delete since I'm not an expert at all regarding registry stuff. Another thing that bothers me is that when I uninstall the mini pc card and let windows reinstall, it shows as "3 wireless" or even "WiFi 4", which seems to allude to some "connection 2" still occupied by some zombie levelone wireless.

I would appreciate any help on this matter,

TIA
Rainer

Hi Rainer

As you can see all the software, after removing, let a few entries in the registry. In my opinion, you should remove the list of Device Manager wireless card and wireless connections. Restart the device and the wireless card should be recognized and installed again.

The wireless connection you can configure with option of windows. If you use another client to the wireless Wi - Fi disable windows configuration.

Tags: Toshiba

Similar Questions

  • Satellite 2410-404 updated graphic card?

    I have a portable Satellite 2410 404 and I never have an update of a pilot. Now I have a new program that does not work. I think my grafic or Driver graphics card is too old. What can I do? Where can I find an update?

    Post edited by: Zlatica

    Hello

    See this page of the Toshiba driver:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite 2410-413: USB2 PCMCIA card does not work

    Hello. This is my first time on a forum, and my English is bad.
    I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

    This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

    Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

    Could someone help me with this issue?
    Thank you in advance for your answer. Here it is (maybe?)
    Another way of formulating the question: how USB ports are managed by the system?

    Hello Rasta

    Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
    Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

    Good luck!

  • Satellite 5200 903: Mini PCI card does not work

    Hello

    I am a user of one:
    Satellite 5200 903: P4 - M 2.2 / 256 + 256 DDR/60 GB/15 t SXGA + / DVD - R - RW / nV FX 5600/SFP/WIFI ready/XP

    My computer is a Toshiba Wirless lan Mini PCI Card.
    I installed the card a few years ago - everything worked great.
    In early 2006, I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
    I installed all the drivers for the card of W - Lan, of course, the map worked in a good way (no driver incompatibility or other problems).
    But, and this is the reason of this topic here. It is not possible to connect my card to any hot spot. I tried with 2 different access points, but the result is the same. 'No connection Point found '.

    Does anyone have an idea of what to do or where I could look for failure? Is there maybe no special software required (I couldn't remember that I needed in my last installation special driver or software)

    If more information is needed, please let know me.

    (Sorry for the bad English, but it is not my first language.)

    THX for your help

    Hello Christian

    First your English is fine, and I'm sure that every user will understand what you want to describe.
    Back to your problem: the wireless card properly recognized and listed in the Device Manager?
    If so, please be sure that this card is enabled. Just that you should be able to see any wireless network.

    You n t need any special software. WIFI connection can be configured using settings in windows.

  • Upgrade the hard drive Satellite 2410 404

    Hello

    I want to improve my toshiba Satellite 2410 404 with a hard drive again. For now I have just 30 GB drive and is not enough for me.

    I checked three products to a new Toshiba hard drive.

    MK-8032GAX
    MK-1032GAX
    MK-1233GAX

    The model MK-1032GAX 100 GB is my favorite and now my question is, if this drive work with my laptop (im going to install the drive in a toshiba technical station, don't do myself.) or if I have to change something with my mobile phone, update the bios or something.

    Just tell me what I should do to work with this drive or if my laptop is not ready for it because it is nearly three years.

    Thank you very much.

    Hello

    As far as I know this laptop supports only 20 GB; 30 GB; 40 GB and 60 GB hard drives
    I guess that a 100 GB HARD drive will not be recognized by the BIOS.

    60 GB MK6021GAS HDD
    MP40KF 40 GB HARD DRIVE
    MK30kef 30 GB HARD drive
    MQ20ksf 20 GB HARD disk

    Hope this info will help you

  • Satellite 2410-404: General Extension RAM issues

    There are two memory two modules (256 + 256) installed on my laptop Satellite 2410-404. There are two locations of memory on my laptop. I want to thank the memory, but I could not find the answers to my questions, but I looked in the manual and to this site and this forum... My questions are

    1. can I extend 256 MB memory by swapping the memory module by module of 512 MB 256? Of memory should what type of module I take?

    or

    2 Schould I change the bars of memory at the same time? Of memory should what type of module I take?

    3. What can I do with the old memory modules?

    Thank you in advance,
    Vladimir

    Hello

    The fact is that you can upgrade the memory maximum: 1024MB.
    In this case, you can use the max 2x512MB memory modules.

    I've studied a bit and found these compatible memory modules:
    PC2100 128 MB (PA3126U - 1 M 12)
    PC2100 256 MB (PA3127U - 1 M 25)
    PC2100 512 MB (PA3164U - 1 M 51)

  • Re: Where to find Win XP drivers for Satellite 2410 404

    I have a Toshiba Satellite, but I don't remember what type it is.
    I have the serial number and production code that is: -.

    MOD: PS241e-5g7u9-had

    I had a hard drive failure and I have now re-installed XP but I lost the driver disk,
    I need to know what driver I need to download.

    See you soon

    Matt

    Hey Buddy

    I took the model number PS241e and searched in google for some details and discovered that it is of a Satellite 2410 404.

    Isn't fantastic and intelligent? ;)

    Pilots must be placed on the European driver Toshiba page.

    He is a former so search in the area of the Archive.

    Archive->->-> Satellite 2410 24xx Satellite Satellite - 404-> PS241E

    Fun :)

  • Satellite 2410-404: which HARD disks are supported

    Hello

    one of our phones, to a new hard drive. What toshiba product are compatible to our Toshiba Satellite 2410 404?

    concerning
    Jan Wernecke

    The problem is that Toshiba provides official information on compatible HARD disk HARD disk sizes.
    But I've studied a bit in the internet and the following four sizes of hard drives must be supported:
    20 GB; 30 GB; 40 and possibly the 60 GB.

    Perhaps more info:
    Must HARD disk supports the improved IDE ""(ATA-5) EIDE interface ".

  • Problem of recharging satellite 2410 404

    Hello

    I have a big problem with my laptop Toshiba Satellite 2410 404.

    Battery does not charge. The orange charge light is on, but windows does not say "supported". The State of the battery is 3%. Sometimes (rerely), it grows up to 5 or 6%. If I deconnect the power suply, the laptop turns off after 10-20 seconds. First I thougt it was a problem with the battery, so I changed it - the problem was still there. I also changed the load table (electronic load) but the problem is still there.

    Can it be a problem with the CMOS battery? Because it is empty (If Li-ion battery isn't insinde, laptop loses date and time).

    I updated the Bios to the latest version on the website of Thoshiba and I use PowerSaver...

    Someone has an idea?

    Thanks in advance

    Hi René,.

    I suspect that the problem may be with your power adapter. Your CMOS battery is not the problem, since this normally recharge your power supply when connected to your laptop. The fact that your CMOS battery is also free of charge indicates that the poroblem lies with the load subsystem or the adapter itself.

    Your incorporstes network adapter an electronic controller that adjusts the current goes to your laptop based on demand. I suspect it is insufficient current originally be available to use your laptop and recharge your batteries CMOS and laptop.

    HTH

  • Satellite A210-1AP - video card no longer works play Call Of Duty 4

    Hello

    I have problems with my video card.
    When I was playing call of duty 4 5 minutes from my video card stops work and the restart of the screen.

    Then he said: your video card no longer works and the problem solved.
    My graphics card is ATI Mobility Radeon HD 2600.

    > Then he said: your video card no longer works and the problem solved.
    And? It works now?

    Eventually the driver graphic hanging and that's why you have received this message.
    It is also possible that the temperature of the GPU was too high and therefore the message appeared.
    The COC 4 needs a lot of material resources and everything should run with maximum performance! Therefore, there are more high heat dissipation and this can lead to problems of graphics card.

  • Wireless card no longer works on Equium l20-197

    Hello

    Initially, I posted the problem I have on the US site, I didn't know that there was a site for europe.
    The long and short of it is my wireless card no longer works
    Here are the details on the hyperlink below and solutions of attempts, none works so far

    http://forums.Toshiba.com/T5/networking-Wi-Fi/wireless-problem/m-p/158046/highlight/false#M9476

    If someone can add something?

    Thanks in advance
    Kevin

    Hello

    According to the post in the US forum, the WLan card is not visible in the device under network adapters Manager. Right?
    You can see an unknown peripheral or Ethernet controller in Device Manager?

    If so, then check this Toshiba HowTo identify the unknown device:
    [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78]

    If you don t have any unknown devices and if the WLan card still isn't in the list, then I guess the WiFi chip is defective.

    In this case I recommend using a solution just as the use of external USB WLAN.

  • Satellite 2450-101 Mini PCI card please

    I have a Satellite 2450-101, which is longer under warranty. I upgraded the memory and noticed a mini-pci slot with two waiting for a card antenna cables. I need a g card (the 3300 looks like a good bet). The manual refers to a mini-pci slot and the CD from the laptop comes with Atheros drivers for the same... I am currently using a PCMCIA card but want to spend money with Toshiba to get a good onboard solution. I called Toshiba who say that he is not a slot in my laptop... Please please don't refer me to a partner because I've never actually talked to one yet. Honest answer please... can I mount a mini-pci card... is the 3300 OK, and how do I join the cables (if this is difficult, I won't)...
    Thank you

    Hello

    I found information that your device is ready for the Mini PCI Wireless card. As you know on the wireless card there are two connectors that are marked of PRINCIPAL and auxiliary normally a white cable goes to the ESSENTIAL and a black to the auxiliary voltage

    Sorry, but I can't tell you exactly what wireless card will be the best for you. In my opinion, you should contact partner in your country. I'm sure they can give you correct information, which is compatible with your device and how much it will cost.

    Good luck!

  • Satellite 2410-404: what Cardbus?

    Hi, anyone know what that Cardbus 2410-404? 16 or 32 bit?

    Good bye

    Hello

    Why not check the user manual? As far as I know you will find the information.
    However, I examine a little on the net and found information that it is 32-bit/PC-Card Cardbus 16 - Bit interface. In addition, you can use card PCMCIA Type II (x 2) or Type III (1 x).

    concerning

  • satellite 2410-603: the graphics card upgrade?

    I have a satellite 2410 603 with a geforce4 420 32 MB card. I want to run games that require directx 9. 0a.
    I seems that my card will not support it. The laptop / card can be upgraded to one that can support 9. 0 or it is part of the motherboard for the laptop and I'm stuck with it?

    Hello

    Sorry I had to say that it is impossible to update a graphics card in a Toshiba laptop.

    A laptop is a very complex machine and there is no space for construction in the slots scalable i.e. I have desktop computers!

    It's ufortunately one disadvantage of a laptop, but instead, you have some advantages like mobility, compactness and so on!

    You could show https://eu.computers.toshiba-europe.com (products) If you want to buy a new one! :-)

    Happy new year!

    Tom

  • Satellite Pro A40 - mini PCI card installation problems

    I hope someone can help.

    I installed an Atheros ar5005gs - askey AR5BMB5 - PA3416U-1MPC, but he just repeat myself DO NOT CONNECT. I have tried wireless zero config but that does not work.

    I downloaded the latest drivers. I don't know what utility software that I use. I tried another mini card and it worked well. (INTEL) What should I do then or try?

    Sorry, but I must ask you something: Why use card Atheros if Intel is working well?

Maybe you are looking for

  • Cannot send instant messages in Skype

    I downloaded windows 8 for my laptop and I have a problem with Skype (windows store version). I can't send messages. I try to type something and pressing enter, but it does not work. http://pokit.org/get/?9e784e2ba64f8368ac6e0f4428ed3836.jpg I tried

  • Connection of the inputs and outputs of a VI

    Hello I'm relatively new to TestStand but I'm tying a VI with output entry. So I did a sample project and do the following: First VI: Takes two numbers and adds them, and returns the result in an indicator Second VI: Takes a number and square and the

  • Cannot find Roller HP5520 cleaning instructions

    I followed a link to the instructions of the printer HP5520. Unfortunately, he said that this document is not available. Can you please give a good link or send me a PDF of the document. I used a set of cartridges, so little use of the printer and it

  • Printer Envy 4502: sound of scwealing loads envy 4502.

    My inkjet 4520 want make a load high height howl or skweek noise when the cover is lifted up and it's lid which exposes the ink cartridges, not scan cover and the same when you start to print and the printer starts at startup.

  • What is the resolution of the photos taken on the PowerShot Elph 115 IS

    New user.  Tech challenged.  What is the resolution of the photos taken on the PowerShot Elph 115 IS?