Satellite 2410 603 run diskcheck and then turns off after startup

When I turn on my PC it runs a check disk and tells that the following file is not valid: windows/prefetch\matcli.exe-061DBA
After the disk check, it starts up to the main screen and then stops as if I had pushed the power switch.

Is there a way to solve this problem without the recovery running disk (and thus losing all my data)?

Hi guy,

MATCLI. EXE is a component of AOL Broadband and is usually optional (i.e. it is not necessary to run Windows).

The PREFETCH folder is from which your laptop try to play the file. It is an area where Windows stores copies of files that are usually loaded during the start-up phase, so that they can be pre-loaded in the cache, which allows Windows to start up more quickly.

It is advisable to clear the contents of the PREFETCH folder on a basis regular (Microsoft recommends a monthly purge of prefetch contents), but you can just delete the folder PREFETCH itself since Windows will allocate a new start-up.

Since you can't actually start Windows to delete the PREFETCH content I suggest that you try to start your laptop in 'SAFE' mode, since this will only start with the minimum of Windows files. If this succeeds, then delete the PREFETCH folder before you try to start Windows normally again.

As a final thought, it might well be a corruption on your hard drive for some reason any and it would be a good idea to run a utility to check hard disk in order to assess the State of your hard drive (using CHKDSK from Windows or a third party utility such as Norton Disk Doctor).

Kind regards

Tags: Toshiba

Similar Questions

  • After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

    Batteries.

  • My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

    My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

    Is there another way to start the IPAD?

    Try the steps here:

    https://support.Apple.com/en-us/HT201412

  • my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

    my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

    Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

    Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

  • G530 flashes like 6 times and then turns off

    G530 earned months; "t lights up. Battery out and tried to turn it on with just power adapter and nothing happens. Battery put it back in and turned on only plugged while and battery lights up and blinks about 6 times and then turns off. Nothing on the screen not boot windows or anything like that?

    Remove the battery and try to start your computer. If it works, replace the battery and try again.

    If she does not press the 'power' for a few seconds, don't still no sign, contact lenovo support and ask for replacement.

  • mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

    mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

    Hello

    1. your wireless mouse does not work?

     
    I suggest that you follow all the steps of the article which will help you solve the problem
     

    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122

  • Drive not opening - short gray screen and then turn off.

    Installed and re-installed 5 times. not expert enough to want to go and mess with registry keys - using the free download for years on PC private and a pro at work version. Seiously turns off after the last few weeks.

    I can't believe that they have not yet released a patch. I to we'll now probably, turn off acrobat then never return - fantastic marketing opportunity for smart people if they make the knowledge of it.

    They are blissfully unaware or they trawl fishing site and who use in their product design?

    Three things to try...

    1. Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
    2. You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
    3. It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html
  • Satellite Pro L10 will not start - green turns off after 3 seconds

    Hello

    Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?

    Thank you

    Melv

    Hello Melv

    Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.

    Please let us know exactly what is happening.

  • iPad does not turn on/just the Apple logo and then turn off again

    I have an iPad, 4th generation, 64 GB with WiFi and cell phone, it is only 3 years and suddenly I can't turn on the iPad. When he started to act up it would freeze upwards with no icons or the button "home" in response, still on the screen, that he was freezing. I was able to restart it with the top button and it would work for 10-15 minutes and freeze no icons or the button being sensitive at home. I could do a hard reboot and when I rebooted, it would work again for 5-15 minutes and freeze once more. This was during a week and now it does not restart. When I try to turn on with the button at the top of the Apple logo appears, remains on the screen for about 3-5 minutes (no progress bar) and turns off again with no other screen appearing. I tried to find a solution online without success. Anyone have any suggestions for a fix for the iPad? I would appreciate any ideas that anyone could have.

    If the unit starts to turn back on the wide, then it seems that if you have a hardware problem. If the unit is charged and a reset will produce only a short period of service, then it is a hardware error or an error in battery, which would be also considered to be material. You can try to restore the device to factory and test without adding any additional content. If it still fails, then make an appointment at the Genius Bar watching him.

    Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

  • m9515y Desktop turns on works perfectly then turns off after 10-15 minutes

    I have a HP m9515y, who recently has been giving me nothing else problems. When I turn on the computer, it will stay on and work perfectly about 10-15 minutes, then stop responding, show nothing on the screen and the hard drive turns off light. The machine itself is still on and the hard drive still works as I can feel the drive operation. I'm pretty positive that it's not the hard drive because it works fine when I plug in the machine to another. The fans are always on the graphics card fan is always on, everything stops just to give me answer. There is no error message, warning or anything else say that there is a problem. I've tried everything I can think of and am led to believe that the motherboard has failed. If there is something else that could be the problem, I would greatly appreciate help. Thank you!

    Did you try to remove the video card and then use the edge video card?

  • Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

    7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

    nothing is dead.

    Hi woldtopper,

    I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

    If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

    If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

    HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

    I hope this helps.

  • When I go to pogo my computer gets a blue screen and then turns off and rebooths

    When I go to pogo.com I log on my screen turns blue, then wrote about this, but it's on and off fast cannot read, there do not have the time

    You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

    When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

    If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

    If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  • lose sp2__randomly Windows vista 32 bit display and then turn off stops. ___can someone advise me on this?

    Event log States:

    Event ID: 7036 - system - Windows Image Acquisition Service entered the suspended state

    Event ID: 42 - Kernel-Power - system enters sleep

    I can easily reboot to the initial page of the web/application page by moving the mouse in the same way one cancels a screensaver/development situation in hibernation. However, I'd appreciate any advice on how I can configure my PC to prevent the incident happening in the first place

    Hi khaled

    Thanks for your reply. I have experienced the problem at least last month. The sequence of events, as shown in the Event Viewer Log Windows for systems are the following:-

    This covers the event when the Acquisition of Image Windows Service entered the suspended state

    Log name: System
    Source: Service Control Manager
    Date: 2010-07-14 16:23:30
    Event ID: 7036
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: PC-user
    Description:
    The service Acquisition of Image Windows (WIA) entered the suspended state.
    The event XML:

     
       
        7036
        0
        4
        0
        0
        0 x 80000000000000
       
        40874
       
       
        System
        User-PC
       
     

     
        Windows Image Acquisition (WIA)
        paused
     

     

    The next covers chronological event enters the sleep system

    BODY {font: x-small "Verdana"; margin-right: 1.5em} .b .c {cursor: hand} {color: red; do-family: "Courier New"; make-weight: bold; text-decoration: No} .e {margin-left: 1em; text-indent:-1em; margin-right: 1em} Laurette {margin-left: 1em; text-indent:-1em; margin-right: 1em} .t {color: #990000} .xt {color: #990099} weather {color: red} .dt {color: green} ".m" {color: blue} .tx {police-weight: "BOLD"} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left : .3em; border-left: 1px solid #CCCCCC; {fonts: small mail} .di {make: small Courier} .d {color: blue} .and {color: blue}.cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier; color: #888888} .ci {font: small mail; color: #888888} PRE {margin: 0px; display: inline} log name: System
    Source: Microsoft-Windows-Kernel-Power
    Date: 2010-07-14 16:23:36
    Event ID: 42
    Task category: no
    Level: Information
    Key words: (4).
    User: SYSTEM
    Computer: PC-user
    Description:
    The system to sleep.
    The event XML:

     
       
        42
        0
        4
        0
        0
        0 x 8000000000000004
       
        40875
       
       
        System
        User-PC
       
     

     
        4
        5
     

    After I rebooted my PC to sleep by moving the mouse, by which the PC resumes its normal operation, the following is the next chronological event reports: -.

    Information on 2010-07-14 16:24:04 Dhcp - Client 1103 no log name: System
    Source: Microsoft-Windows-Dhcp-Client
    Date: 2010-07-14 16:24:04
    Event ID: 1103
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: PC-user
    Description:
    Your computer has been awarded with success a the network address, and it can now connect to other computers.
    The event XML:

     
       
        1103
        0
        4
        0
        0
        0 x 80000000000000
       
        40876
       
       
        System
        User-PC
       
     

     
     

    Information on 2010-07-14 16:24:07 Service Control Manager Eventlog Provider 7036 NoneLog name: System
    Source: Service Control Manager
    Date: 2010-07-14 16:24:07
    Event ID: 7036
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: PC-user
    Description:
    The service Acquisition of Image Windows (WIA) entered in the executing State.
    The event XML:

     
       
        7036
        0
        4
        0
        0
        0 x 80000000000000
       
        40877
       
       
        System
        User-PC
       
     

     
        Windows Image Acquisition (WIA)
        running
     

    Log name: System
    Source: Tcpip
    Date: 2010-07-14 16:24:04
    Event ID: 4201
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: PC-user
    Description:
    The system has detected that the network connection to the Local network adapter is connected to the network and launched a normal operation.
    The event XML:

     
       
        4201
        4
        0
        0 x 80000000000000
       
        40879
        System
        User-PC
       
     

     
       
       

        Connection to the local network
        0000000002002C 000000000069100040020000000000000000000000000000000000000000000000
     

    Updates Windows informs me that my display driver for NVIDIA GEFORCE is up-to-date. The only other point may be worth mentioning is that I changed my screen resolution of 1024 x 768 and often but not always after I restarted, the system automatically back to the default display of 32-bit resolution namely 1280 x 1024. I left at this setting for now.

    Look forward to your additional comments

    Thanks and greetings

  • Why my (wired) laser mouse keeps freezing every 2-5 seconds and then turns off?

    I use Windows XP Professional SP3, and my (Genius NetScroll G500, USB) mouse keeps freezing every 2-5 seconds, until he "dies" (I can't move or something, it's like off). Sometimes, it works normally, sometimes doesn't. I don't really know what causes to keep freezing. This problem does not occur on Linux for now. I download the new updates, but I do not expect any kind of positive results, so please do not respond with driver update. Could you please tell me what to do to fix it properly? Note that the mouse is brand new, bought today.

    EDIT: It seems that Safe Mode fails.

    Hello

    I suggest you to connect the mouse to another computer if possible, and check if the same problem occurs, this is just to check if it is the problem with the mouse.

  • Startup menu appears intermittently and then turn off again several times. Cannot work all menu visible. What can I do to prevent it from happening?

    I'm not a computer Wizard so I hope to give you the correct details.

    The botton 'Start' on the left side is very used to activate the menu.  However, I am not pressing the windows key on my keyboard or by clicking the button on the screen with my mouse.  The problem is intermittent, but extremely frustrating, because when the menu pops up that I can not go on with my work.  By clicking the button on the left on the desk with my mouse can temporarily solve the problem, BUT the menu appears again a few seconds later.

    Sometimes when using any program or watching a dvd. Sometimes it stops for a while, but just at the point where I think that it has sorted itself, he returned.

    I ran Windows Defender and a registry cleaner - I'm about to try AVG anti virus.  If this does not work, I'll go out of my mind.

    I hope there is a simple solution to this... Help, please!

    I spoke with Neelabh Sinha Microsoft based in New Delhi.  Several minutes of trashing the problem, we discussed the possibility of RF interference with my Microsoft wireless keyboard or mouse as a signal low resistance warning came a few times.  I discovered that, even if I did not use the keyboard wireless at the time, he was placed in storage always batteries.  Unknown to me, a book had fallen against the keyboard.  Despite my my laptop in a downstairs room far away from the location of the keyboard, the receiver picked up stray signals from it.  I was using a mouse without a wire with the receiver close to your computer and laptop was tested almost all the signal received from the keyboard.  However, some of the signal got through and are in conflict with the orders that I was typing on the laptop.  Standard keyboard strokes became orders of service and it is these conflicts which were manifested on the screen.

    Thus, in the future, when you use don't not my wireless keyboard, I'll make sure that the batteries are taken to avoid a recurrence of my problem!

    I appreciate the time taken by the Member of the community who responded to my question.  I'm embarrassed that the cause was so stupid and banal, and yet he had such a profound effect.

    Just to say that the keyboard and mouse Set wireless Microsoft performed more than adequately. Perhaps too well...!  Top marks to Microsoft to make such a competent piece of kit that works even when separated by walls, a spread of two-story between transmitter and receiver.

    All points must go to miss who thought that "outside the box" to identify the likely cause of my problem.  Respect!

Maybe you are looking for