Satellite 2410: Updates of Windows XP problem - it hangs after reboot

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Satellite U300 - graphic driver Windows Xp problem

  I bought Satellite u300 with Windows Vista, then I kill vista and install XP.
  Everything is good video work - but only with the problem

  OpenGl - trolling
  All videos - late

  Help me!

  I downloaded the drivers from Toshiba site of the 20/02/08 Display Driver Intel Windows XP 6.14.10.4831 World Wide.
  Then to install it. After installation I have the same problems.

  After that I have an appointment on the Intel site and download the latest graphic drivers for 965Chipset express
  But when I m trying to install it I see - this leads isn t tested for this PC.

  Pls download required drivers from the Distributor. Installation will stop.
  HELP ME GUYS - I NEED THE NORMA GRAPHICS DRIVERS

  Hello

  try this one... maybe this will help

  http://support.toshiba-tro.de/Tedd-files2/0/work/display-20080908151151.zip

  V6.14.10. * 4953 *.

• Updates to Windows 8 problem

  This is a new Asus Notebook and my first go on Windows 8. As soon as I turned on and managed to get the hang of navigating around her, I realized, I need to update to Windows 8.1. The store's site helpfully informed me how to install updates to Windows 8 that I need before installing 8.1 and I dutifully toddled off to do exactly this.

  I found the right place and discovered that there are 102 updates, I clicked on install and lost for a cup of tea, knowing that it would take some time. When I got home, it's always 0% installed. I searched on the forum here and followed the various suggestions that I could understand. I went into the control panel to install updates one by one, no joy. He says he does, but nothing ever really happens.

  I did the usual things, I checked my internet connection. I turned it and turn it back on. No joy.

  I have about a little more and find a troubleshooting updates. I ran it, it said I would have more chance if I ran it as administrator. I had no idea, I wasn't and clicked the button. He told me that he had solved all my problems. Fortunately, I tried to install the updates, this time, just watched it updates. For 30 minutes. I turned it and turn it back on. I tried again. To the best of my knowledge, he is always looking for updates.

  How the hell update this thing? I did nothing to it because I bought it today and I'm completely stumped!

  (Please use simple language, I used to set my ZX Spectrum in Basic. I don't have not changed since then.)

  Hi Jai,

  Use the troubleshooter in this article to resolve errors Windows Update '0 x 80070002' or '0 x 80070003 '. This problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Update with Windows 7 problems

  Updated my windows 7 64 bit Home Premium Edition, I face the following error...

  Some updates have not been installed.

  error (s) found: update code 80070003 windows has encountered an unknown error...

  Hi Zainab,

  • If the service is then right click to Start and then stop.
  • When you are there, do a right-click on the service and select Properties, set theAutomaticstartup type.
  • To activate the automatic, update try this fix: http://go.microsoft.com/?linkid=9709473
  • You need to bring up the CMD in administrator. To do this right-click on CMD.exe icon and select 'run as administrator '.

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 2410 603 run diskcheck and then turns off after startup

  When I turn on my PC it runs a check disk and tells that the following file is not valid: windows/prefetch\matcli.exe-061DBA
  After the disk check, it starts up to the main screen and then stops as if I had pushed the power switch.

  Is there a way to solve this problem without the recovery running disk (and thus losing all my data)?

  Hi guy,

  MATCLI. EXE is a component of AOL Broadband and is usually optional (i.e. it is not necessary to run Windows).

  The PREFETCH folder is from which your laptop try to play the file. It is an area where Windows stores copies of files that are usually loaded during the start-up phase, so that they can be pre-loaded in the cache, which allows Windows to start up more quickly.

  It is advisable to clear the contents of the PREFETCH folder on a basis regular (Microsoft recommends a monthly purge of prefetch contents), but you can just delete the folder PREFETCH itself since Windows will allocate a new start-up.

  Since you can't actually start Windows to delete the PREFETCH content I suggest that you try to start your laptop in 'SAFE' mode, since this will only start with the minimum of Windows files. If this succeeds, then delete the PREFETCH folder before you try to start Windows normally again.

  As a final thought, it might well be a corruption on your hard drive for some reason any and it would be a good idea to run a utility to check hard disk in order to assess the State of your hard drive (using CHKDSK from Windows or a third party utility such as Norton Disk Doctor).

  Kind regards

• Lock screen Satellite A100-153 and Windows login problem?

  I installed Windows XP Pro with Service Pack 1, everything worked fine, but when I updated the BIOS to 1.40 (WIN) at least once a day connection Windows crashes (I can move the mouse, but can't click on my username to type the password, alo TAB key does not work). Also, now when I press the key combination Fn + F1 to lock the screen, sometimes (not always) I can't go stay right back to the black screen!
  Someone knows what can be a problem?

  Hello

  According to these document Toshiba BIOS FAQ update of the BIOS can be done with 2 different procedures:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  It is possible that you have useed the wrong or bad BIOS BIOS update procedure.
  Well, it's not easy to say why the connection of the laptop freezes. The fact is that the Satellite A100 is a laptop very new and it comes with all service packs Microsoft (SP1 + Sp2). I don't know whether you have installed the device manually, but you must use the Toshiba Recovery CD.

  I would recommend recover the laptop with the Toshiba Recovery CD and finally, you check to see if the connection problem.

• Satellite P850 - 8.1 Windows and problem of Skype with webcam internal

  I have upgraded to Windows 8.1 and my Skype, I see the incoming caller, but the caller cannot see me.

  When I go on Skype, the 'blue' webcam indicator does not light, but does not work on other applications

  I have a Satellite P850 with integrated webcam that works in other applications.

  I checked and installed all the upgrades of windows, so I don't know what is the issue.

  Everyone has to a similar problem.

  Paul

  Hello

  After upgrading Windows 8.1, you must update and reinstall the driver Toshiba and the tools that have been released for Windows 8.1.
  Did you do that?
  If this isn't the case, update the software to the Windows 8.1 compatible version.

  Reinstalling Skype would also be a very good idea.
  Uninstall the previous version installed, restart the laptop, install Skype again and check the configuration of Skype!

• Satellite 2410-504-driver Windows 2000 network missing

  Where can I ask for Toshiba create a network of Windows 2000 for my PC driver laptop Toshiba 2410-504? As you can see, Toshiba 2410-504 has drivers for the two 2000 & XP. If I install XP then I get everything works perfectly. If I install 2000 then I get everything works perfectly but the network card. Somehow the Intel PRO network adapter is not detected...

  You are right. LAN driver is not available for download, and I presume that driver LAN should not be installed separately. I found the info that this Satellite is supported for W2000 SP3. This means that this book must be installed with the W2000 SP3 to have all the features.

  Which SP is preinstalled on your laptop?

• Satellite 2410 - update driver

  After you install a pcmcia usb 2.0 card, I had to realize some problems. The USB 2.0 wlan didn't work properly, Windows XP sp2 hang up during the new installation of the stick, etc.
  What is a pci - usb problem
  and
  could it be solved by installing new drivers for the chip?
  In this case, I would like to know, what Intel drivers I have to use... (Support INTELS-page I has not found the drivers for i845-mp and 82801ICH3-M)

  klasus

  Hi Klasus

  As far I know that Toshiba doesn't support the use of additional hardware components and there is no guarantee he wants works fine. Sorry, but with this kind of problem, you are on your own. Try to check the support card producer site.

  I also have bad experience with this card. If I put in my Satellite unit hangs and I have to every time reboot the unit. I was not able to solve this problem, but now I use the firewire port for my external device.
  In my opinion, you must use the System Restore tool and restore the system to an earlier time.
  Before do you try then check the BIOS settings. I put t know if this will help but set up the configuration of the device on the plateau by the OS.

• Update on windows 8 problems causing

  So I've had this laptop HP Pavilion G6 on Windows 8 since May of this year and this issue I had guard the Outlander. Basically, a pop-up window in the lower right of the screen saying that there is an update from HP to be installed, with three options - to perform the action now, see Selecting since how long until the next restart and another option that missed me at this time. Whenever I click on the button confirm to install updates the pop up screen disappears. Minutes later my phone freezes and the fan is going mental. The only way to turn off the laptop (since the power buttom will not do anything) is to remove the battery if it runs of that or remove the charger cable. This becomes very time consuming... can anyone help with this problem or explain why this happens?

  See you soon!

  Hello

  If you want to disable the automatic updates like this, you can do it from Start Menu - HP - HP Update

  There is a settings button at the bottom of the main panel where you can select the frequency of checking of updates - weekly or never.

  It could be useful!

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

• Satellite L850-1VQ - activation Windows reinstallation problem

  Hello

  After a problem with my PC, I had to re - install windows. Since I did, every 2 hours, I have a screen "activate window", but when I click on it, I have a "unidentified error". I called Microsoft, but they say I should call the producer to have an original key (it is not on the back of the laptop). I try to contact the Toshiba Support, but it is not free and I don't want to pay for it, one already pay for the computer

  Can you help me please?

  (Sorry for my English, I'm french).

  Robin

  By relocation do you mean own installation of OS or the Toshiba recovery procedure?

  After the OS installation running a system Toshiba the serial key recovery is not necessary because the image of the 'system' will be activated if you connect to the laptop computer to the internet for the first time.

• Update for Windows Vista problem

  I had a virus on my computer and I rebooted just my Dell Dimension 9200 from scratch with Window Vista.  Everything worked fine until I went to Windows Update and installed updates.  Now, I don't see any of my CD ROM drives listed.  When I go to Device Manager it shows CDROM drives (2 of them), but it is said that they cannot be used because the information in the registry is damaged or missing.  I tried to restore the computer to a restore point before installing the updates, I did, but the system restore no longer works.

  After wringing my hands and trying to find and install the drivers without success, I have completely reformatted (AGAIN) and reinstall Vista reinstalled the printer Dell discs (AGAIN) and he did exactly the thing again.   This machine has no new material and ran Vista successfully for about a year before the virus got it.

  On a second note, almost half of the updates do not give an error code that indicates that the computer uses a proxy server.  This is not the case.  I use a DSL line to a medem then my router / switch that I have used for years.  This computer is connected to the router / switch with an ethernet cable.  I use the router so my laptops can connect wirelessly.

  Hello

  Contains the exact error message and the error code that you get when you try to update Windows.

  Follow the steps below and check if that helps you.

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options .

     Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. On the connections tab, click LAN settings , and then click Advanced .
  4. Remove all the entries in the Exceptions section, and then click OK .
  5. Close Internet Explorer.
  6. Click Start and type cmd in the box start the search .
  7. In the list of research results, right click on Cmd.exe , and then click run as administrator .
     If you are prompted for an administrator password or a confirmation, type the password, or click continue .
  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.

  Also try the link to the following article:
  http://support.Microsoft.com/kb/971058

  For CD/DVD player, follow the link below:
  http://support.Microsoft.com/kb/314060

  All the best!

• Update for Windows Server problem

  Dear Sir

  I am facing a problem with the server 2012.

  When I update 2012 80244023 server error show me code

  pls hel me >

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.