Satellite 2430-101: BIOS and many other issues

Similar Questions

• Satellite 2430-101: external USB 2.0 HARD drive problem

  Hello everyone,
  I have Toshiba satellite 2430-101. Recently I bought external 40 GB hard drive. When I connected to my toshiba usb hub, it is said that it exceeds the limit of the power, and I need to detach the external hard drive. When I read these last questions, someone suggested to uncheck the power supply to the usb hub options, but he says always the same. They are someone to help me.
  Concerning
  Sri

  Hello

  Well, in my opinion, this problem occurs if the USB port can't provide enough power.
  In this case, that the USB hub must be connect to external power.

  Good bye

• Problems with my Satellite 2430 101 cooling

  Hello
  I have the Satellite 2430 101 for more than 2 years now and there is no problem. In the last two months, I recognized that it becomes very hot, especially when the game and turns off. So I started using a USB cooling pad. But now it turns off same whne this button sometimes using already after 1 h, in collaboration with etc anyone else have these problems? Or ideas of what goes wrong?

  Thank you
  Jay

  Hi Jay

  It is not easy to say what he can be. Have you ever tried to slow down the speed of the processor in the power management?

• How to use on the Satellite 2430-101 S-Video port?

  Hi all!

  I don't know if I'm in the right section... I have a second hand S Satellite 2430-101 and use Microsoft Windows XP. Unfortunately I can't use the s-video output, because I do not know, how should be done. Quite simply, do not attach the s-video cable to the TV worked. What do I need to enable something in Notepad? Thank you in advance

  Hello

  As Nicky said if the unit is pre-installed with recovery CD, you can use the FN + F5 key combination and switch to the external display or TV. Check also display properties > settings > advanced > nView. Control the clone and device settings option. Under device settings, you can find the device selection option.

  Good bye

• Satellite 1900-101 - video and ethernet drivers

  Toshiba Satellite 1900 101 video and ethernet drivers
  Please give me this drivers on email.

  Hey, Hey you want someone else to do your work. ;)

  You can find one. Go to Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads
  When you open the drivers under type of product download page, choose the option ARCHIVE and you'll find everything you want.

  Good bye

• Satellite 2430-101 is compatible with 100 GB HARD drive?

  Dear comrades,

  I immediately bought a Hitachi Travelstar 7K 100, 100G of HARD drive.
  Can I use this HARD drive with my laptop Toshiba 2430-101? Has anyone had experience with this combination?

  Kind regards

  No, you cannot use the 100 GB HARD drive.
  As far as I know the laptop supports following three HARD drive sizes:
  -30 GB (4200 RPM)
  -40 GB (4200 / 5400 RPM)
  -60 GB (4200 / 5400 RPM)

  More large hard disks could not be recognized by the BIOS.

• Satellite L500 - noise Squeak and mic/noise issues

  Hello
  I hope you can help with my sound problems!

  I have a Satellite L500 which is 18mth old.

  * Something *.
  In March, I had problems with my microphone / sound. If I had my volume of more than 50%, I would get a terrible grinding sound feedback that has been difficult to mute (IE due support on mute a couple of times).

  As I got a 2-year warranty, I sent him away and they said they fixed it but is short-lived. The problem came immediately. The only solution I found to have its volume by more than 50% was to completely turn off the microphone.

  * Two problem *.
  For the last few weeks I've been to randomly make this top placed, continuous his squealing that occurs usually when I am in public with my laptop in my backpack (annoying!). I have to continue to support on mute for the squeal to stop. Interestingly, my cell phone is cut off when it starts. Sometimes, my phone is hot when it occurs. Is this overheating problem?

  All the solutions for both of my sound problems? Should I send it to get my warranty repair? When I argued that it was not fixed the first time, they said Windows is probably corrupt and is not under warranty.

  Thank you!

  Kat

  This should help you:

  + Hissing on the Satellite L500 +.
  + http://aps2.toshiba-tro.de/kb0/TSB0402UB0001R01.htm+

  This problem occurs if the volume of the microphone in the speakers properties is enabled.
  After you turn off this point the issue with Larsen is no longer in effect.

  If this isn't a hardware problem but to question. With the help of right settings will help you.

• Installation of XP pro sp2 stalls to the file teamw.exe then ks.exe and many others.

  I'm trying to re - install XP pro SP2 after a virus attack.  I did a full format on my WD 160 GB hard drive.  Serial ATA Mothboard Biostar G31 - M7 TE with the most recent BIOS.  Generally, installation hangs when you attempt to load the file "teamw.exe" the file depending on whether he's looking for is ks.exe there are twenty others subsequently that it cannot find.  I tried another disc with SP2.  The same problem.  I joined my current version to SP3 with the same result.  Thought it might be a hard drive problem.  A ran the WD disk checker rescuer in the BACK.  No problems found.  I don't think that is the motherboard related.  Would be - this somehow a hard drive problem?  No other equipment still installed.  It drives me crazy.  Thanks for your suggestions!

  Hi Indiana brand,

  Whenever there is a problem with the Windows XP disc, we encounter this type of questions. We recommend trying the following steps and check the result.
  a. installation to launch Windows XP.
  b. when the file fails to copy, remove the disk from the CD drive and insert the other XP CD in the drive to see if the copy process continues successfully.
  c. If the installation continues, complete the installation.

  See How to install or upgrade to Windows XP

  If all else fails, contact the manufacturer of the system for more support options.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Someone at - it a repair for a function that is usually common in Windows, the Svchost.exe process? I and many other users of PC have infested with this mystery bug. Its not to damage yet, but...

  I'm infected w / which seems to be the most mysterious infection known for Windows right now.  One wonders if it's a Trojan horse, worm, malware, etc., or just a natural process for C: Windows\system32.  It's almost like 'shadow people '.  For most, there quite harmless, fantasy of the mind.  But, from time to time, there is actually something that happens on the corner of your cornea, so to speak.  This is very sneaky and difficult to diagnose a problem b/c he hides with the Service host.  I'm here b/c I have a question, but also to help others to understand that, unlike the 'shadow people', the shadow of an infection is very REAL.  This infected process is, for the most part, quite harmless unless something malicious attaches to it and could things get a bit risky.  Anyway, I'm sorry for this rambling diatribe, but I have a question for someone who is very smart b/c so far it seems not yet to be a definitive repair because some people still think it's a natural function or process in the Windows operating system.  So here it is: How can I solve this problem?  And I can fix it with or without a full restore of my records?  I'd really appreciate any input on this very discouraging, boring, mind and body draining, faulty computer "BUG".  BTW, I have a dv9500 HP Pavilion x 64 Ultimate for Vista that was bought there are 3 1/2 years.  I've dealt with this infection since the end of February and have spent more than $400 on this terrible nuisance.  But Club (all jokes aside), I really enjoyed, grateful and very thankful for someone with an answer to this complicated issue.  Thanks for the time!

  Hello

  read this information

  What is svchost.exe and why it works?

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

• Police on Google, Facebook and many other sites, but not all, is "BOLD", no matter what I do.

  Since I installed Firefox on my newly-fixed computer (has been completely annihilated, installed FF 06/05 / 15), fonts for several sites has been "BOLD", regardless of how I set my preferences. It comes to Facebook, Google and Gmail. If I say not to allow pages to choose their own fonts, this problem is solved, but the characters such as arrows do not appear on other sites.

  What I really want is to be able to see that I read something by having make it back to normal, rather than "BOLD". The only way I can do it is by prohibiting the pages to choose their own fonts. Is it possible to fix this?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  Some display drivers also have parameters that can affect the appearance of fonts.

  Were you able to find which fonts are assigned by the police test?

• Error code: sec_error_unknown_issuer when opening Gmail and many other trusted websites!

  I tried to open G-Mail and a few other trusted sites and Got "this connection is untrusted" with error code: sec_error_unknown_issuer.

  There is no other button then "get me out of here".
  Date and time are also defined in law.
  I use Eset Smart Security 7 and Firefox on Windows 8 unique.

  I faced this problem right back in Firefox 2 days only. All other browsers (Chrome, iron, IE10) work as usual.
  How can I solve this problem?

  Concerning

  If you use the feature of ESET that filter web traffic, this problem could be caused by ESET intercept your secure connections and presenting a false certificate. If you see ESET as the transmitter, you have a few options:

  (1) disable SSL filtering

  This would solve the problem instantly, but you would have less protection. Check the documentation of your product for specific details, or if you have ESET NOD32 ANTIVIRUS 7 look under:

  Advanced Setup (F5) > Web and email > Web access protection

  Here you can adjust if HTTPS is scanned. (At least, so according to this manual.)

  (2) try ESET automated to import certificate

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  These steps are listed on the forum of ESET:

  • With all browsers and e-mail clients private, disable SSL analysis (Advanced setup (F5) > Web and email > Web access protection, I think under protocol filtering > SSL), OK change
  • Re-enable SSL scanning, OK change
  • Start Firefox and test

  (3) manually import the certificate ESET in Firefox

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  According to the manual, you can export the certificate to ESET under:

  Advanced Setup (F5) > Web and email > access protection Web, perhaps in the section protocol filtering > SSL

  Search

  See the certificate > Details > copy to a file...

  Once you save the file (probably with a CER) you can import it using the certificate Firefox display.

  "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "view certificates" button.

  Click the References tab and then click the import button.

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Satellite A660 - links BIOS and version history

  Just for your information, please find below the complete * A660 BIOS version history: *

  _ [Version 1.80 - 2010-10-01 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v180.exe] _
  -Limited the speed of DRAM DDR3 - 1333 Mhz to 1066 MHz on the Clarksfield CPU platforms.
  -Update: the status SM_SENSE # is maintained during hibernation for the function sleep & music.

  _ [Version 1.70 - 2010-09-22 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v170.exe] _
  -Fixed: Background becomes empty, and the wrong password will not automatically clear when setting or deleting a user or supervisor password.
  -Fixed: System hangs when you set a channel owner of 512 bytes.
  -Fixed: When enabled the Fast Boot, DMI Type12 had no data.
  -Fixed: When Fast Boot has been activated, the system did not ask passwords system and HARD disk.
  -Fixed: When PCI LAN has been disabled, the start menu has reported a network problem.
  -Fixed: When the serial number of a RAM module is all zeros, the system crashes.

  _ [Version 1.60 - 2010-08-03 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v160.exe] _
  -Updated the Intel OSB logo.
  -Fixed: Shared allocation of memory on UMA SKU problem.
  -Fixed: Blurred logo Toshiba.
  -EC-1, 60: reduces the sensor button debounce time to 50ms.

  _ [Version 1.50 - 2010-07-08 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v150.exe] _
  -Update of the MRC of Intel to 1.3 - 1 for cause of stop start hot.

  _ [Version 1.40 - 2010-06-28 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v140.exe] _
  -Updated the N11M and N11P NVIDIA VBIOS code base.
  -The M13106E5_04 Clarksfield CPU Microcode Update.
  -Fixed: The computer may crash if some RAM modules are used in the Computrace platform.

  _ [Version 1.30 - 2010-06-09 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v130.exe] _
  -Updated the VBIOS N11E of Nvidia for 3D editions.
  -EC - 1.30: added workaround for a problem of ALS function after the release of the S4/S5 and reboot.

  _ [Version 1.20 - 2010-06-03 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v120.exe] _
  -Added: N11E Nvidia for 3D SKU VBIOS.
  -Update of the optional ROM of Computrace to correct a problem installing and running SysMark/MobileMark.

  _ [Version 1.10 - 2010-05-10 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v110.exe] _
  BIOS of initial production of these models.

  Hello

  I found the same thing on the page of the Toshiba driver we.

  Welcome them

• Satellite 2430-201 starts and the black screen

  Hello!

  My good old, we no longer works! I don't know what the problem is! When I try to start, I have no Bootsequence on my desk! I don't see anything! I tried to change the battery of the Bios, the RAM, free HARD drive starting... only what I get is the coolingnoise and a glance!
  (Windows XP)

  welcomes the best

  Looks like a hardware problem

  Try this workaround: remove the battery and the AC adapter. Wait one hour and then reconnect the battery and the AC adapter. Now, try to restart the laptop. Maybe it works.

  Otherwise it could be the motherboard or a malfunction of the CPU, but this can be checked from an authorized service provider or you buy a new laptop with full guarantee.

• Atrix gave me. And many other

  I found a topic in which a person of the Portugal complains its Atrix 4 g. He's no more. No matter what he does: master reset, master clear... In fact, he won't even a master reset because it does not illuminate. You can try taking the battery or any other attempt to turn it on. If you have something to offer, I'd like to hear, but it seems quite difficult to understand why Motorola has not taken measures to correct the problem. In Brazil, in a website called "Aqui advertising", something like "Complain about here", Atrix seems to be a champion in complaints about the same problem: its resistance to work:

  http://www.reclameaqui.com.br/1935247/Motorola-do-Brasil/MEU-Atrix-4G-desistiu-de-funcionar/

  http://www.reclameaqui.com.br/1368641/Motorola-do-Brasil/Motorola-Atrix-Nao-funciona-quebrou-com-10-...

  http://www.reclameaqui.com.br/1567293/Motorola-do-Brasil/Motorola-Atrix-NAO-comprem/

  http://www.reclameaqui.com.br/1448321/Motorola-do-Brasil/Comprei-UM-Atrix-e-como-outras-pessoas-com-...

  http://www.reclameaqui.com.br/1704345/Motorola-do-Brasil/aparelho-celular-Atrix/

  http://www.reclameaqui.com.br/1315577/Motorola-do-Brasil/celular-Atrix-Parou-com-13-Dias-de-uso/

  http://www.reclameaqui.com.br/1400664/Motorola-do-Brasil/Motorola-Atrix-desligou-Sozinho-e-NAO-Liga-...

  http://www.reclameaqui.com.br/1665614/Motorola-do-Brasil/Motorola-Atrix-2-apagao-em-menos-de-3-Meses...

  http://www.reclameaqui.com.br/1861473/Motorola-do-Brasil/aparelho-Motorola-Atrix-com-problema/

  Motorola should take knowledge of that. And correct the situation. I find it ironic that the inventors of Six Sigma are not able to fix their own products. Is not to say that it is something wrong.

  I'm glad you understand Portuguese, AlphaDog. It's just a shame you do not understand it very well. All cases involving the same problem. And they do occur not only in Brazil, but everywhere in the world:

  http://Forum.xda-developers.com/showthread.php?t=966071

  http://Forum.xda-developers.com/showthread.php?t=1334724

  http://Forum.xda-developers.com/showthread.php?t=1017679

  http://Forum.xda-developers.com/showthread.php?t=972672

  https://supportforums.Motorola.com/thread/51704

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1350-Atrix-will-not-power-up.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/2608-wont-turn.html

  http://www.atrixforums.com/Forum/Motorola-Atrix-help/1488-Atrix-wont-power-up-wont-charge.html

  I could try to find all the complaints about the same problem in all languages, mainly in English, is Motorola give some thought the problem and try to solve this problem, but, the response you gave me, and has held the official position of the company, is not what Motorola wants to do with this forum. The problem exists, you know, and you try to deny it.

  I managed to solve myself, after reviewing all those forums. When the battery is completely exhausted, only phone with the Motorola charger official charges, not with a USB connection or with the official Motorola charger for cars. When he has left fee it charges in any way. This is a bug, and you should fix it. Not deny it.