Satellite 2450-101-ide #0 error appears

Similar Questions

• Satellite 2450-401: "IDE 1 ERROR" after installing the new NEC AD - 7543A thin disk

  I have a Toshiba 2450-401 and I buy a slim NEC AD - 7543A labelflash drive.
  When a reboot my Toshiba raise an error: "IDE 1 error".
  This is a message of incompatible equipment? There is a solution for this error?
  How can I solve this?

  Hello

  What to say dudea? ¦a? ... seems you have made a big mistake and purchased a bad CD/DVD drive.
  This error message is only displayed if the drive supports bad master\slave or c - salt settings!

  You should know that not all readers are compatible and can be used in the laptop!
  AFAIK the operating manual provides information on some readers supported!

  But if you na? t know this drive is compatible, try to contact the service provider allowed in your country and order the support one new!

  Good luck

• New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

  Hi all

  I have a toshiba 2450 S203.
  For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
  I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

  Thanks in advance,

  Daniel

  Hello Niko

  Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

  Thank you.

• To the Satellite 2450-101 DVD drive failure

  Hi guys again...

  I have another problem with my old laptop Toshiba Satellite 2450-101 which I hope you can help me with.
  The original DVD-rom drive - a Teac DW - 224th - went "off the radar" a couple of times a year and only re - appear in my computer after a re-boot, but he then quickly disappear again.

  It is curious that the drive is still listed in device as Manager works correctly.
  Would have to be a complete reinstallation to get it back again when the process would start over.

  Now during the boot process, a message appears at the top of the screen saying "error Eide...
  I bought a new replacement brown-box DVD - RW double layer drive PC World - a Sony IA2604H - and has installed but it's exactly the same thing but this time she is mentioned in as a 'CD-rom SCSI device' Device Manager... which is certainly not.
  In both cases, readers are completely dead and does not eject even trays.
  Needless to say, it's driving me crazy.

  Can you suggest anything?
  Thank you once again...
  JB

  You can boot from the bootable CD?

  If so, then try to remove the upperfilters and lowerfilters:
  http://support.Microsoft.com/default.aspx?ID=314060

  If you cannot start from the CD, then either:

  (1) the ODD or another component of the motherboard connector is defective / in bulk.
  (2) the original Teac ODD is defective, and the new Sony is not compatible (has the wrong master/slave settings)

• HARD drive password prompt - Satellite 2450-101

  Hello everyone!...

  I am a new user and would like to know if anyone has any suggestions of how I can fix my computer problem?

  I have a laptop Toshiba Satellite 2450-101 that I recently brought a new battery and the adapter because due to the machine is not used for several months, everything was fine for a few hours!... the screen became 'blue' and I restarted the program, but then, I proceeded to get an error message (forgive me, because I don't remember exactly what he said!) who said something about Realteck? and Ethernet cable error and then prompted me to insert system disk?

  Unfortunately after pressing enter the same message kept in view, finally I decided to used the drive recovery to re - start the computer but all I get now is the ' screen of welcome-followed by long pause, followed by a black screen that ask to ceiling "HDD password?

  Does anyone know if it is a fixable problem?

  Any help on this would be greatly appreciated!
  I have

  Hello

  Looks like your HARD drive is locked using a HARD drive password.
  I put t know why this password is necessary but if you don t know this password, then your HARD drive is no longer available and you will need to buy a new one.

  Eventually it s simply a matter of HARD drive and, therefore, the laptop crashed before this HARD drive password appeared so I think that you need a new HARD drive.

  Good bye

• Satellite 2450-101: need last display driver

  Satellite 2450-101 with geforce4 420go - last display driver? Posted the: 7 May 06 18:12

  My laptop does not work the games 'Fear' or 'Call of cthulhu.
  The errors seem to relate to the display (fear gives an empty window, even if the sound is running, then crashes. Cthulhu says that it cannot find a suitable resolution).

  The latest display driver I can find is dated 36,48 Date 02/12/2003 version.
  It looks pretty old. Is no later versions available?

  I also see that there is an update of the BIOS for my laptop - is - this may have an impact on the problem of game?

  Anyone who manages to run these games on a similar specification?

  Thank you
  Jan

  Hello

  The problem is that the graphics drivers from Toshiba are distinguished as the graphics of origin for example nVidia drivers.
  Original graphics drivers are designed for desktop use and you may not use these drivers, as they can damage the graphics chip for laptop. Graphics drivers from Toshiba support thermal protection and control the performance of the graphics card.

  As far as I know that this unit has been delivered with a NVidia GeForce4 420Go 32 MB graphics card. You can try to check out the other laptops with the same graphics card and try to use this driver.
  I also found a few topics on the omega drivers. It seems that this could be a good solution, but if you use other drivers, so you can do it at your own risk!

  Here is the link:
  http://www.OmegaDrivers.NET/NVIDIA.php

• Replacing hard drive for Satellite 2450-101

  Hi, my laptop hard drive is broken and I need a hard drive replacement for my aging * Satellite 2450-101 * urgent, but I can't find my mannual and another source model support for portable computers.

  I thought it was a * standard internal 2.5 "IDE * (and thinking about buying a digital _Western 250GB 2.5" IDE hard drive 5400 RPM 8 MB Cache - OEM, model _: _WD Scorpio WD2500BEVE - 250 GB - ATA-100_), but I am not sure.
  If anyone knows? Help, please. Thank you very much!

  I think 120 GB maximum capacity too.

  If you have misplaced the user manual you can download it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online manual

  I founded you can use a second HARD drive in the Bay to select if you need more disk space.
  Drive external HARD is also a good solution for more disk space.

• Satellite 2450-101 How do wirleless?

  I have the 2450-101.
  If I dial my BT wireless home network, what should I do for this computer?
  Material is involved or just to download a driver?

  Sorry to be so thick - I am not a technophile.
  Thanks in advance.

  You want to connect to the WLan router wireless?

  Well, as far as I know this laptop is an oldie and the WLan card was optional.
  This means that not all Satellite 2450-101 were equipped with the internal WLan card

  If your laptop was not equipped with the WLan card, then I recommend to use an external solution such as WLan USB stick which supports the WLan standard even as your WLan router.

  Concerning

• Satellite 2450-101 Mini PCI card please

  I have a Satellite 2450-101, which is longer under warranty. I upgraded the memory and noticed a mini-pci slot with two waiting for a card antenna cables. I need a g card (the 3300 looks like a good bet). The manual refers to a mini-pci slot and the CD from the laptop comes with Atheros drivers for the same... I am currently using a PCMCIA card but want to spend money with Toshiba to get a good onboard solution. I called Toshiba who say that he is not a slot in my laptop... Please please don't refer me to a partner because I've never actually talked to one yet. Honest answer please... can I mount a mini-pci card... is the 3300 OK, and how do I join the cables (if this is difficult, I won't)...
  Thank you

  Hello

  I found information that your device is ready for the Mini PCI Wireless card. As you know on the wireless card there are two connectors that are marked of PRINCIPAL and auxiliary normally a white cable goes to the ESSENTIAL and a black to the auxiliary voltage

  Sorry, but I can't tell you exactly what wireless card will be the best for you. In my opinion, you should contact partner in your country. I'm sure they can give you correct information, which is compatible with your device and how much it will cost.

  Good luck!

• How to boot from the CD from Toshiba - Satellite 2450-101?

  Hello everyone,

  I would like to know how to start from the cd to install windows xp.
  I have a toshiba laptop (Satellite 2450-101).
  I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

  Kind regards
  Steve.

  Hello

  If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

• Card WLan where satellite 2450-101

  Where the map sitting in a Satellite 2450-101 wireless?
  And where can I get the card?
  Other cards are compatible with the 2450-101?

  Hello

  I didn t find exactly the information concerning this oldie but I found some nice details about Sam 2455.
  It of very similar to the European Sat 2450-xxx but the 2455 Sat is an American model.

  Compatible WiFi cards are:
  PA3212U-3MPCR wireless 802 LAN cards Kit. 11B (Agere)
  PA3273U-1MPC Wireless LAN Card 802 Kit. 11a / b (Atheros)

  I think that the miniPCI Wlan Card slot is hidden somewhere under the keyboard.
  So to access this slots the keyboard must be removed first.
  Usually it of fixed by 2 screws that are hidden under the plastic thinking.

  PS: the WLan miniPCI card must be connected to the WLan antenna.
  There are two wires (black and white). A white cable normally goes to the HAND and a black at the entrance to THE

• How to remove the password of BIOS on Satellite 2450-101?

  I have a Satellite 2450-101 and it seems that my HARD drive is already damaged. I would like to boot from the CD/DVD drive, but it won't start? It has a power on password too and I want to remove it but I can not enter or it does not penetrate into the BIOS settings?

  What can I do? Any suggestions?

  Am I entitled? You want to remove the BIOS password?
  Unfortunately, something like this is not possible! If you n t the BIOS password you can not delete it! Only the ASP in your country could do this!

  So if you want to remove it, contact the authorized service provider!

  But you want to boot from the CD! Am I wrong? Why you t n try to use the F12 key to get the start menu?
  After mobile power press F12 and you should be able to choose the STRANGE as a source of start-up! But the CD/DVD must be inserted before using this option.

  Try this!

• Satellite 2450-101 after the 60 GB HARD drive upgrade, made only to see 30 GB

  Hello world

  I'm new to this forum. I own a 2450-101, a little old man, real it´s, but still a very nice PC. Harman-Kardon louspeakers make it very useful for music.

  I would switch the HD, so I installed a new 60 GB (the maximum taken in charge, I said) and used the recovery CD.

  Everything worked perfectly, but it seems that only 30 GB can be seen by Windows. I heard, that I might need to update the BIOS. Mine is version 1.50.

  After a long search through sites Toshiba and the Inetrnet, I can only find updates the BIOS for the new models...

  only reference I've seen is on this page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07, but

  Yet once I don't find Bios for my model.
  Please any help would be really appreciated ;)

  Hello

  You are right. This laptop is a bit old, but very nice. It provides performance enough for someone in need of this laptop only for everyday use.

  As for you statement about 60 GB of HARD drive. Well, I m a bit confused.
  How did you check the size of the HARD drive and why you say that it recognize only 30 GB?
  How did you check that? And you are sure that you have installed and 60 GB HARD drive?

  I recommend to check the size in disk management!

  With regard to the BIOS;
  The BIOS for this laptop is on the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There, you have to search in archive Archive Satellite Satellite 24xx Satellite 2450-101.
  As far as I know the BIOS 1.50 is available on the page!

• SD card reader supports only 1 GB cards satellite 2450-101

  I just bought a Kingston 2 GB SD card. Despite many efforts, I can't get my 2450-101 to format 1 GB storage on this map.
  Someone at - it of this experience and a way around it?

  I found in googel Satellite 2450-101 specifications and it seems that the card reader can manage only the SD card without support MMC. Additional not all card format SD is supported and therefore in my opinion the 2 GB format SD card is great

  I put t know if it will help you but I read somewhere in the forum about similar themes. The Toshiba SD card format utility has been updated and could format the 2 GB SD cards. I don't remember the version of this utility, but you can try to download the SD card from the Portege M400 section format utility.
  But as mentioned, I don't know if this utility works on the Satellite 2450 m.

• Portege 2000: IDE #0 error appears

  I've been working with my Portege 2000 without problems, but 2 days ago, when I turn on the screen see "error ide #0", I tried hd 1'8 "with and the adapter to a pc standard and everything seems correct, all files and folders is displayed."

  When I turn on the lights hd' laptop computer led but "ide #0 error" appears.

  BIOS does not show any reader.

  Thank you

  Hello

  My first idea was a malfunction of the HARD drive, because the HARD drive is connected to the controller of DIE #0.
  Especially the message if the BIOS does not recognize the HARD drive!
  Try to access the BIOS and check if the HARD drive is listed and has been set to primary IDE.

  If the BIOS talk you about this issue means that it s is not a software problem, but a hardware problem.
  Try to format the HARD disk on the other computer and check if it of possible to reuse the HARD drive in the laptop.

  If this does not help, I guess that the HARD drive needs to be replaced :(