Satellite 2450: How do I start the laptop with the lid closed (LCD).
I have connected the switch of power with cables and stretched it out and it works fine.
My question is how can I start the computer with the lid closed? Is there a switch that allows the computer to know when the lid is closed or not? Can I remove this? where is this switch?
This option can be disabled threw the bios of the computer and how?
Any help apreciated
Well, you should be able to boot up your laptop in this way, but how to market? The power button on my laptop is under the cover.
And Yes, there is a kind of switch, which leave the phone know that the door is closed, but it's only important in Windows, it does not close or go on stand-by.
To avoid this, just set power options to do nothing on a closed lid.
Tags: Toshiba
Similar Questions
-
Satellite L450 - how do you start the recovery from the HARD disk?
Hello world
I just joined the forum and already I need help.
I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.
and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.
Ken
For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.
-
How do I start the Windows recovery environment (WinRE)?
Hello
I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
How do I start the Windows recovery environment (WinRE)?
I mean what key should I press during the boot process for Windows re menu?In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.
Hope it's the same on your.
Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?
/ Torbjörn
Post edited by: ssstsg
-
How do I start the installation of windows 7 started without back up
How do I start the installation of windows 7 started without back upas I reinstall my windows 7, that the installation process has been abandoned that I forgot to plug in the charger and it now displays "windows installation was not completed. to install windows on this computer, restart the installation "How can I restart the installation..." i havnt made any recoveryBoot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
How can I start the database without using crsctl? ~ Xev
Hey guys, it's Xev.
I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.
How to use srvctl to put the database in a mode of editing?
I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?
Thank you
Xev.
Xev Bellringer wrote:
Ho Toby, when I try this command, srvctl start db d db_unique_name o mount
It gives me the following two errors:
PRCD-1027 unable to recover the RAC database
RPRC-1070 has been unable to verify
I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.
I have crs stack while I do this? If yes how do I start the CRS battery without the database?
Hi Xev
On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.
Remember: -.
1 take a full backup still running (assume that you already have).
2. make cluster_database = false, before starting the recovery.
3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.
4 restore the db.
5. you start db.
6. set cluster_database = true.
7. stop your db in normal mode, immediate.
8. start your database by srvctl
Good luck...
Concerning
Jihane Narain Sylca
-
I get a message from DLL run when starting my laptop with Windows 7
I get a message from DLL run when starting my laptop with Windows 7. One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?
Hello
Do not assume that any malware has been removed.
This is probably the result of malware then do a very thorough check and when the system
is clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to check if the lid switch is broken on Lenovo Thinkpad X230i?
I have problems with my new Lenovo Thinkpad X230i lid switch and I would ask you how to test if the lid switch is physically broken. Since I bought the laptop a few weeks ago the laptop suspended when I closed the laptop, but still I had to press gently with my finger on the lid so that the laptop has recognized that the cover is actually closed. Now, this trick no longer works.
Now, I would like to find a way to better test if the lid switch is physically not works. I found this article in the forum: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-does-not-detect-lid-open-close/td-p/49626... and I followed the steps. I entered the BIOS and closed the cover, but on my laptop, the screen goes out, even if the cover is completely closed and even after pressing gently with your finger.
I cannot conclude now that the switch of cover material is actually broken and I need the service of Lenovo?
switch cover on the X 220 and X 230 is triggered by a magnet. The laptop enter the BIOS menu, then use a magnet and see if that turns off the display. IF this is your lid switch is working properly and the problem you are experiencing is most likely software. If it isn't then it is broken, and you need to replace.
-
I have dell studio with vista sp2.
When my laptop into hibernation and the lid closed all of a sudden he wakes up to the top and the lid remains closed
I didn't understand why, I checked it for malware, virus, clean the laptop using pro speedypc with no luck.
Any suggestions?
Hello
This should help you, by following the steps until you find the problem:
"How to solve a problem of Mode Vista or Windows 7 sleep"
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
See you soon.
p.s. never use Registry cleaners and system, such as Pro SpeedyPC optimizers.
They can do more harm than good.
-
I want a laptop, when closed, to go to sleep, then transition to Hibernate.
When open, transition work. Race walk, sleep, Hibernate.
When closed, transition fails. Running, sleep (slow orange blinking), and then rapid blue/red flashing LED.
During flicker battery consumption is large and the battery goes dead quickly.I have tried many power configuration settings.
Cover-> nothing or sleep - same results.
Cover-> hibernate - works, but is NOT what I want.
Button to Hibernate, but not what I want.
I want to do what it should - sleep and hibernation...
What does glitter blue/red LED mean?
OK, I found a workaround solution - with a caveat.
The xHCI driver is apparently in conflict with something that causes chaos when the laptop tries to transition from sleep to Hibernate with the lid closed.
This is definitely a bug that should be fixed! Acer needs to work with Microsoft to find the problem and fix it.
If you go into the BIOS settings (reboot and press F2) and disable xHCI.
The USB ports will return to PCI mode. All USB ports are working, even if I think they are USB 2.0, not 3.0
Now the power level can be set to sleep when the lid is closed and it will cause a transition to Hibernate when appropriate!
-
HP Elitebook 8560w: screen using my 8560w with the lid closed and external
Hello
I connected my 8560w to an external monitor via an advanced docking station. My monitor allows me to switch between two sources.
I intend my set-up for my future office and virtually all that my activity will be on the 8560w and the monitor.
Can I run the 8560w for a long time with its lid closed without risk? I was in Control Panel/power/choice what closing the lid does and all sleep on battery and nothing power are.
Is there a heat problem? Or other side effects?
Thanks, Russ
It should not be unwanted problems to run for a while with the lid closed.
-
Dell inspiron w / xp sp3 stops when the lid closed only in mode standby
Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual. Why is it turn off in standby mode? Happens in AC mode and battery. is it a software problem or a hardware problem. I see others with the same problem and vista dell.
Dell support.
Contact Dell
http://en.community.Dell.com/forums/
Dell forums
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
Satellite L300 - how to save on the E: drive?
Hello
My sister seems to have problems with his hard drive, he said that it is almost full (vista drive (c :))) a message keeps coming up)
I was wondering just how she can start using the E: drive. Is it possible to change the settings on the computer so that everything is saved on disk E
I don't know much about computers but would really helpIt is Toshiba Satellite L300 and Windows Vista 32 bit
Thanks maz
Hey Buddy,
You can use drive E all the time... ;-)
The point is that most programs will be installed on the C drive, so you should choose drive E, if you want to install.
In my opinion the best option is if you save all important files and private on second drive E. I mean these files like photos, videos, music, documents, etc. He just copy and post it on the E drive, everything that s! :)
-
Satellite L350-14F - Vista cannot start the Realtek RTL8101e WLAN
Dear readers
I'm Dutch, if my English is not very good, so my apologies for that but I have a big problem.
My Toshiba Satellite L350-14F with Realtek RTL8101E family PCI-E fast ethernet NIC (NDIC6.0 with Vista OS) cannot establish a connection with the outside world...
I tried many drivers, but all do not work... I can't find any other driver. So I guess there must be something else on the computer...I reinstalled my computer while going to format all my hard drive and I have no CD of drivers for the laptop.
When I got a _wired_ connection, Vista can try solve the problem itself. He found a driver and then I am redirected to a site of toshiba... Where to download a driver from East. I start the download and installation, but then the installation says that I don't have a correct serial number...All this me freaks out there... who can help me please?
Greetings
RoyPS: I checked my BIOS for strange things and one thing caught my attention on
I have an option: Wake On LAN anti-piracy. And it is disabled
BUT I can't change it to activate.Hello
First of all, it would be interesting to know what you mean without link with the outside world
The wireless network card is recognized correctly in the device (without yellow exclamation points) Manager?
The router is visible on your computer?First of all, you must make sure that you use the latest WLAN driver on Toshiba website:
http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download DriverAdditionally, make sure that you have installed the latest version of BIOS that you can find on the site of Toshiba, too.
You should check the WLAN Setup on your laptop and the router. Make sure you that you have disabled Vista of WLAN power save function. You can find this option in Vista Power Management.
Make sure that you use the same standard WLAN on your laptop as on the router, for example, 802. 11B or 802. 11 g.
Last but not least you must update the firmware on your router. You can find it on the site of the factory. After the firmware update unplug the router for 5 minutes of the AC adapter.Good luck!
PS: Wake on Wireless LAN has nothing to do with this issue. It of a feature that you can boot the laptop via a WLAN connection.
-
Re: Satellite A300 - how can I make the webcam work on Win7
Hello everyone.
I had Win Vista installed on this Satellite A300 and it worked well.
I had no problem at all.Then I moved to Win7 and now I'm going through the test of the work of webcam.
I tried to install all types of drivers, even those for A500, but it would be of no use.So, how can I make the webcam work on my A300?
I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.
I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(Thanks in advance,
Ozma.
Hello
Seems the webcam software has not been installed correctly.
That Win 7 OS do you use? 32-bit or 64-bit?Here you can find Chicony webcam driver for Win 7 64 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zipand here you can find Chicony webcam driver for Win 7 32 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zipGood luck
-
Satellite A100 - how to turn on the Bluetooth radio?
Hi, I have a Satellite A100, and I would like to know how to turn on the bluetooth radio. I'd appreciate any help on this.
Hello
First that you check if your laptop was equipped by BT module.
If so, check if the BT stack is installed correctly.
If Yes, then you should be able to turn on the BT using the FN + F8 key combinationGood bye
Maybe you are looking for
-
How can I download producer?
How can I download producer when you use iBooks author and iTunes Connect to publish my recipe book for free? I created an account, completely separate from my normal Mac ID after reading some of the tips in these forums. Now I can progress through t
-
Why all of a sudden can't Windows Defender update on my XP Home?
I've been using Defender since it was in beta (started). I went to update it and perform a scan today and now it say's that it cannot update on my computer. What gives?
-
Cannot find / cannot open the downloaded file.
I downloaded a video file, but after the download, I am unable to find or open. It is said: "Windows cannot find...". ». How can I find them? Note: There is a dot (.) and colon (:) in the name of the file accidentally.
-
Cannot install SP2, receives error code 0 x 80070490
Original title: error code 0 x 80070490. Windows vista service pack 2 is not installed, as code error 0 x 80070490 rises. How can I fix this error. ? Please in laymans language.
-
How can I free up disk space? I continue to have alerted it is low
The original title: disk space I get a message that my disk space is insufficient, but when I go in files deleat it says there are no files, how free of disk space?