Satellite 2770 - problems with Windows 2000 display driver

Similar Questions

• Satellite L655-1F0 - problems with download ATI display driver

  I have a Satellite L655-1f0 and I recently had to re - install Windows 7.
  Of course, this meant losing all pilot plants I had before, but I was hoping that I could find on the Web from Toshiba site. And many of them that I have found, however, the ATI display driver seems to be corrupted...

  Y at - it another site where I could download this driver?

  Thanks in advance!

  Hello

  Are you trying to download this driver?
  For me download works well. Unzip it worked normally too so I was able to start the driver installation.
  Everything seems to be OK.

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite P200D - problem with the ATI (atikmdag) driver

  Hello

  My system:
  P200D-111 HD 2600, AMD Turion 64 X 2, Vista Home Premium 32 bit

  The problem:
  White, computer screen stops him self or the Vista comment: driver atikmdag caused a problem and to restore.
  Whenever the computer stops him self, Vista gives me the answer atikmdag caused the problem.

  Yesterday I tried to compare the system, but at the end of the display flares program and the computer stops.

  My Question:
  Is a pilot most recent HD 2600 in work or everyone has the far right for me?

  Stand by. You described the problem, but we don't know what you've done before. Have you updated to display driver? Have you noticed the same thing with the factory settings?

  > Yesterday I tried to compare the system, but at the end of the display flares program and the computer stops.
  This means that you were not able to complete the recovery procedure?

• Display satellite P30 with Windows 2000 issues

  I can't find a driver for Satellite P30 I'm running on Windows 2000. Windows 2000 is the only operating system, I am able to turn it on now. If someone was able to get a P30 works with Windows 2000? Help, please.

  Hello

  This laptop model has been tested only with the Windows XP operating system and it is not supported with Windows 2000. Sorry, but you won't find any display driver for this device on the Toshiba site. The only way is to try to find a driver on the site of the producer graphic CAD.

  I'm not sure but I think that your unit has "ATI MOBILITY RADEON 9700" graphics card.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with Windows Media Player: "Server execution failed" and "files needed to display video are not installed or do not work properly.

  I have a problem with Windows Media Player on laptop Lenovo G780. My laptop is under warranty (bought a month ago), but technical support Lenovo told me that the Windows Media Player program is not covered by the warranty.

  And this is a problem:

  When I click on Windows Media Player - to about 0.1 sec I see it opens and closes the window and nothing happens.

  When I select a mp3 or wmv file and right-click with the option open with Windows Media Player - I get a message: "Server execution failed" - I checked that all services with 'Media' in the name are running.

  When I select a mp3 or wmv file and right-click with the open option with Windows Media Center - Windows Media Center opens with the message: "the files needed to display video are not installed or do not work properly.

  When I select a file mp3 or wmv and right-click with option open with Windows Movie Maker life - see the video

  I tried to turn / WMP and WMC - did not help
  Tried to run as administrator - did not help
  I don't see something suspicious under events

  What can I do else?

  Thank you

  Zarek

  I had the same problem and then by chance, I tried a video on YouTube and it worked for me. Here's how I went on this issue and solved my problem:

  1. go to the computer, then OS (C).
  2. you will need to open Program Files (x 86) and Program Files.
  3. go to Windows Media Player in Program Files (x 86) and open the folder.  Then, remove the wmplayer file.  You may need to work around the error TrustedInstaller.  I'll tell you that, in a moment.
  4. in Program Files, go to the same folder for Windows Media Player and select the same file again. Wmplayer.  Copy the file in another window open.  Copy ensures that if the question comes up again you can at least try to fix it again.
  This should be the end of your problem.  If you need to circumvent the TrustedInstaller question is how:
  1. right click on wmplayer and select Properties > Security > advanced > owner > Edit > other users and groups.
  2. Enter your username and then click on check names.  Click OK.
  3. close the dialog boxes as he has requested.
  4. open again the properties and click Security.  Select your username from the list and click on edit.  From there, select full control.
  This should give you full control over the removal of the original file for WMP and easily allow you to copy the other files (x 86) programs.
  Please let me know how it goes for your problem.

• Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

  Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

  Tried the Canon support? That would be my first port of call...

• Satellite L40 - F14 with Windows XP - seeing WiFi is disabled

  Hello!

  I have satellite L40 - F14 with Windows XP Home SP2 - and everything works fine.
  But there is a little problem with indicator LED WiFi - WiFi works normally.
  connection with router and... This LED turns OFF. It is not big problem,
  but I like, if everything works well :)

  Now I have the latest version of the driver installed (from 29.11.2007)---> http://support.toshiba-tro.de/tedd-files2/0/drvpack-en-20071119132412.zip.

  Can you give me link to correct functioning driver WiFi for Satellite L40 - F14 or answer where is the problem?

  Help me please :)

  st_man

  *_@st_man1_*
  Have you checked if the WLan switch on the side of the laptop is on? This switch activates and deactivates the WLan led. If this is not enough, I guess that there is a hardware problem. Perhaps some loose contacts, for example.
  This can be corrected with any software update, I think that the technician should take a look in the notebook and should check this

  _*@chris4o*_
  First of all it s very strange that your laptop has not delivered with any Windows operating system! Each new Toshiba notebook was shipped with the Windows operating system and the image of Toshiba should be already preinstalled.
  In addition, you should find the Toshiba Recovery CD in the package. This CD contains all the drivers Toshiba, tools, Windows OS and additional software!

  With regard to the pixel dead;
  Usually the internal laptop display can be replaced if a large amount of dead pixels would be displayed on the screen. There is an exactly information about replacing the screen.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  In any case, I recommend you really clarify this two issues from your laptop dealer! The laptop must have the OS!

• Problem with Windows Media Player, version 11, running under windows vista

  Hi - my is problem with Windows Media Player. Whenever I try to play a DVD of my CD/DVD drive the error message "windows media player has stopped working" is displayed. Otherwise, WMP seems to work very well. All of the suggestions. My next step, then a lot of time, is to format and reinstall windows. I am running Vista at the moment. I have WMP version 11.

  Thanks Matt

  You can check this information http://support.microsoft.com/kb/306331

  Or use Media Player Classichttp://sourceforge.net/project/showfiles.php?group_id=82303&package_id=84358

  Or use VLC http://www. VideoLAN .org

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Updated by Satellite A350D - 20K for Win8 - necessary display driver

  I have a Toshiba laptop

  model:
  Satellite
  A series
  Model: A350D - 20K
  Part number: PSALME - 01D003DU

  You can check can model here---> http://icecat.biz/hr/p/toshiba/psalme-01d003du/prijenosna-ra-unala-4026203675308-satellite-a350d-20k-2113599.html

  My problem is on my display driver, because I discovered that ATI has no update for the 4000 series and below, and I use 3000 series on my machine...

  Can someone help me please? I really want to improve my OS to win8? should I continue the upgrade? According to me, my cell phone features are good for the minimum requirements to upgrade to win8, but I couldn't find the part number on the list provided by Toshiba for laptops which is expandable to win8...

  Thank you guys...

  I put t know how to help. Toshiba doesn't support this old Satellite for Win8 and hardware manufacturer doesn't support graphics card too.
  If something exists doesn t how do you find it for you.

  I have Satellite A300 and I agreed that Win7 is the limit for this machine. It works perfectly and it's OK.
  WIN8 is the new generation and of course we need better and more recent material for it.

• Satellite L300 freezes with Windows Vista

  I use the Satellite L300 laptop with Windows Vista.
  Once the connection is freezing, so I used to do Toshiba HDD recovery and formatted and installed with its recovery tools.

  Now its connect with normal mode.
  The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Again, I have to forcely, I need to start with safe mode and normal mode then again once I get the same problem.

  Can someone tell me the solution?

  > The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Maybe some of your applications cause this problem

  I think you should check what software could cause what I mean it of not impossible that a 3rd party applications that runs in the background would be the cause of your troubles

  Of course, it could also be related to a hardware malfunction. It looks a bit like a RAM problem, but just a personal suggestion.

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884