Satellite 3000-214: motherboard / pilot

My card mother S3000-214 (PIII 933) failed. I replaced it with an S3000 -? PIII 900. I ran to the S3000-214 toshiba recovery disks (the only ones I have). To start windows, I now get an error message "Stop 0000007 b. The microsoft site indicates a driver problem - probably the hard drive. Anyone know where I can get records of recovery for the S3000 PIII 900 Board or drivers for it?

Thanks in advance for any help.

Emma.

Hello

First of all, the Toshiba recovery image has been designed and tested for each series laptop and you can use this image of recovery only on this unit.
If you have changed the motherboard the derivers preinstalled on the restore CD will not work because it was not designed and tested for you new motherboard.

Well, usually you can order the CD from recovery with the Toshiba service partner. But I guess you can order only the restore cd that came with your laptop.

I recommend you to install the Windows from the original CD of Microsoft operating system and the download page of all necessary drivers will be end on the Toshiba driver
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

Please note: you must install the Toshiba stuff in the right order.
Chipset utility, common modules, graphics driver, etc...

Tags: Toshiba

Similar Questions

  • Satellite 3000-214 - Ctrl key keyboard does not

    Hello

    I started my old Satellite 3000-214 Notebook and suddenly my Ctrl key not working not.
    I tried to clean the keyboard disassemble all the keys to it and clean the grates, without success.

    Can someone tell me where I can get a suitable keyboard: i in Germany.
    It must be an original Toshiba keyboard or is it possible from another manufacturer?
    How can I remove the keyboard of the laptop? What I have to open the case, or is it possible to get it out with a screwdriver or something?

    Thx for any suspicion!

    Best regards.
    Ting

    Hello

    You must use the original Toshiba keyboard that is cared for and compatible with this laptop.
    All parts and devices, you can buy the Toshiba authorized partner in your country. The database complete with ASP in the world, you can find on the page of European support of Toshiba.

    Usually, if you want to remove the keyboard to remove first the thin cover above the keyboard.
    There are two screws holding the keyboard. After the withdrawal of these two screws, you will be able to set the keyboard.
    But be careful; the keyboard is connected with the flat cable to the motherboard.

  • Satellite 3000-214 driver needed

    Hi all

    I'm looking for drivers for my * S3000 *. It is a German model of 2001 GR.
    The Toshiba driver support isn't the Sattelite S-supported model.
    Where can I find them. Unfortunately I can not find my driver CD more. But I need the drivers after
    my new installation of Win XP.

    Thank you

    null

    Hello

    It is very interesting theory that you wrote in your post but I must disappoint you.
    You are completely wrong!

    As a first step, you do not have any laptop's model. Simply satellite * 3000-214 *.
    And secondly This oldie is also supported, but if you have old laptop model, in that it makes sense that it may be entered in the ARCHIVES.

    Then, visit support page Toshiba new http://eu.computers.toshiba-europe.com and by-products type choose ARCHIVE. So search satellite 30xx and you will find.

    ;)

    Good day!

  • Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

    Hey all,.
    I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
    http://videoff7.free.fr/sl5cg.jpg

    I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
    When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

    So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
    http://videoff7.free.fr/sl5ck.jpg
    http://videoff7.free.fr/sl64z.jpg

    The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
    I checked my BIOS, it is the latest version: 2.30.
    Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
    But for some reason, it does not.

    EC which could I missed?

    It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
    So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

    My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

    Thanks a bunch for any info.
    Kind regards

    Alcahest

    Hello

    I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

    I think that this will not work because of the speed of the CPU.
    In addition, I found this Toshiba document:
    http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

    It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

  • White screen on a Satellite 3000 214

    My wife has dusted off the keyboard while the machine was running and now the screen is blank!

    I tried Fn + F5, but no use. It could be that she unwittingly supported on Fn F1 and set up a password (to random key strokes while dusting). I have never used this feature before - just discover it in the manual.

    Anyone know how to unlock, or other ideas, please?

    Thank you very much!

    Peter

    What do you mean that your screen is empty? You mean that even if you turn off the computer and turn on again, the blank screen persist?

    Please tell me more...

    Welcome them

  • Where can I buy a motherboard for Satellite 3000 514?

    I need to replace the card mother (?), mother (?) on my Toshiba Satellite S3000-514.

    Question: Where can I go to buy the motherboard?

    Question 2: How much in pounds sterling can I expect to pay?

    Thank you.

    Hello

    I found this site with the motherboard for a Satellite 3000 series but it seems that the Satellite 3000 514 is not listed.
    http://www.sparepartswarehouse.com/Toshiba, Laptop, K000816560.aspx,

    I m not 100% sure, but I think that the 3000 series was delivered with the same motherboard.
    But before you buy anything, you should ask Toshiba authorized service partner for a more details. Guys should be able to also order a compatible Board directly from Toshiba.

    I think you're on the good side, if you ask the opinion of the service provider.

    But as you can see the motherboard is expensive and eventually you might find a second-hand surfboard.

  • What is the name of my motherboard - Satellite A200-214?

    Hello!
    I have a Satellite A200 214 and I need to know the name of my motherboard. Anyone know it?

    Thank you

    Hello

    Motherboards are Toshiba and designed only for different sets of Toshiba laptops.

    If you need a new motherboard or part number you can call your local ASP (certified partner) and can request for a compatible motherboard.

    Please don t mix Technology Office with the technology of portable computers. Desktop PC can be equipped with different motherboards from different manufacturers, but a specification must use a special designed mother in most of the cases it s a motherboard for laptop computer to the manufacturer.

    Welcome them

  • Battery won't charge on my Satellite 3000 - x 4

    Hello

    I have a Satellite 3000 - x 4 which does not seem to charge the battery. Have tried new ones, but they do not recharge, defiler light flashes but does not load.
    All of the suggestions.

    Hi keith267,
    I also have a sat3000! What cpu you have in it?

    There are 2 reasons for this problem:
    a cheap and an expensive... lets see what we can do!

    -Make sure that your adapter is good
    for this purpose operate the machine without battery!
    Flashing LED or is it constantly on? When flashing you you have a problem...
    on? good!
    does not start or stops:-AC adapter has gone... made a cheap (app.40a? ¬)

    -operate your machine with battery only
    Ok? good!
    does not work or stops immediately: training of battery is recommended
    for this purpose start a dos without mains system and let it run "to dry".
    After that try to reload with alternating current, do this 5 times to train your battery
    OK afterwards? good!
    None? It is the bitter pill to take

    -Insert the battery and connect the ac power
    When your machine Boote und runs, half the work is done
    the light continues to blink? Yes? you need a new powermodule for your machine...
    That's the bad thing: it is on the motherboard and can not be changed wothout change the motherboard...

    If you have no luck with this procedure you can have mine instead ;-)

  • Satellite 3000 - x 4 - battery flat

    I took my old Satellite 3000 - x 4 out when she came back the battery was flat and would not charge.
    I bought a new one on e - bay, adapt, and yet it's still flat.
    It works on a/c very well.

    Is it possible that someone can stop charging the battery,
    Do you think that the new battery is not good, or is it my s3000-

    Hi mate

    First of all; are you sure that the battery you bought on ebay is ok?
    There are a lot of strange people who sell a product that is not completely ok
    So first of all, you must be sure that the new battery is 100% ok.

    If the battery is ok so I guess that part of the motherboard works bad maybe something wrong with electronic power supply

    In this case the mobo has need to be replaced, but look, man. This isn't worth a try because a new motherboard is more expensive than good old classic, so I wouldn't recommend replacing the mobo

  • Weird problem of satellite 3000

    I have 2 laptops Toshiba Satellite, both for professional use,
    the 3000, however, my pride and joy. I work in a very exposed position and people actually stop and ask myself... What is the brand of this laptop? Recently, I've updated
    for XP Pro the 384 MB of Ram. However, the machine was still faster.
    Until last night, at home, I wanted to work. I have
    could not start windows. Finally a Dos window pops up saying "not properly connected IDE cable", as well as a series of short beeps. I took the laptop first thing this morning, tonight, what I was told that the IDE controller jumped because of a power surge, and I so need a new motherboard. Is it possible? I'm afraid that they spoil this machine. This laptop is much faster than Compaq P4 my husband.

    HI Muzikatz,

    I also have a Satellite 3000 and it works correctly. I love the Sat 3000 because it's a well designed laptop which is with its integrated components very fast and strong. In our society we have about 10 Sam 3000 in use and we havn't a hardware bug again. In my opinion your IDE cable maybe loose by a blow or something else. Another problem might be that your RAM upgrade it damaged.

    In my mind there is no other explanation for this problem. Maybe you could visit a Toshiba service partner to solve the problem. On the following site, you can find under Support / downloads - homepage to support a request for Toshiba Service partner
    http://EU.computers.Toshiba-Europe.com

    Bossi Bye

  • Satellite 3000 - X 11: four beeps on startup, white screen

    Hi people,
    A friend gave me a laptop to try and fix. It's a Toshiba Satellite 3000 - X 11.
    Sometimes, it works very well. Starts as usual.
    Sometimes, quite randomly, it will not start. In this case nothing will come on the screen at startup. The fan will kick in. The screen is black and there are four beeps. About 1 per second. It is then. On, but half-dead. You can hear no time to other fan.
    I read the posts on the net who suggest that this is a hardware failure any. I want to know is if there is an easy way to know what hardware has failed. Almost all of the messages I read talked about three beeps. That's four.

    Does no diff if I run it from ca or the battery.

    I don't know what actually started working again.

    I suspect (just a hint) that it tends to stop working after it has been moved (picked up and moved to another office etc.).

    Any suggestion would be appreciated.

    Also, is there a Toshiba diagnostic tool I can download and run that will test the machine on?

    Thank you

    Jonathan

    Hey Buddy,

    If the machine is behaving really as you described then the machine has a serious malfunction. I had the same machine, a few years ago
    the same problem.
    So I brought my machine to a service partner and they exchanged a few "PCB´s" as they said.
    These PCB´s are, for example, the motherboard or graphics card.

    If the machine you have is under warranty, you won´t have chances yourself due to defective components.

    Welcome them

  • Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

    At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

    > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
    > the motherboard is the culprit

    Therefore, the diagnostic test is necessary.
    A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

    I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

  • Satellite 3000 514 often starts no-beep code appears

    Hello
    I have a 5 year satellite, 3000-514 laptop and now it only starts when it wants to.
    Most of the time, the screen remains black and the laptop emits four beeps of the four sounds.
    I can try and try again nothing happens, until he starts?

    It is very annoying, anyone experienced this same pb?
    Anyone know how to fix this?

    Thanks for your help

    Kind regards
    Marc

    It seems that the laptop may not successfully complete the POST (power on self test). The laptop will beep because there is a material error, and some device has not passed the test.
    You can try to disconnect all the external devices and then try to start the laptop.
    But I put t see much chance that this will help solve the problem

    For most in such cases, external assistance is necessary. The technician with a lot more experience as a common user like me and you should check the laptop. I hope that there is no malfunction of the motherboard as this could be a bit expensive :(

  • Need diagram for Satellite 3000 601 PS302E-019R5-SP motherbaord

    Help me please!

    My laptop Toshiba Satellite 3000 601 PS302E-019R5-SP is attacked by a wet and when I clean it 3 components such as resistors and diode are broken

    I need to shematheque (schema) motherboards to fix it.

    Thank you very much!

    Unfortunately I doubt that you will find these diagrams because these manuals are not published on any of the sites Web from Toshiba.
    I don't think that the ASP (certified partner) might get such manuals.

    So either you seek in the net for these details or ask the ASP in your country for assistance.

    Good luck

  • Continuous beep on startup that goes once connected - Satellite 3000

    I just brought a satellite laptop computer opportunity 3000-214, which worked well on the first departure to the top, but I turned it off then decided to turn right back on and now it makes a nosie continuous beep until windows load then stops. The machine then works perfectly since then. Any ideas.

    [Edited by: admin on 5 February 06 12:45]

    Hello

    You said that the unit stops Windows load. Is the unit freezes or stops?
    Have you checked the battery status? Try to remove the battery and after a few minutes trying to plug it in again. Try to start the device again.
    If this doesn't help the Toshiba service should check the laptop.

Maybe you are looking for

  • A damaged adapter will cause battery at no charge?

    The cord is frayed at the junction of magnetic thingie likely to strain. I stuck with Chatterton and MacBook can be used when it is plugged. However the battery will not load. Any relationship between damaged adapter and no loadable batteries? Thank

  • Cannot delete apps Apple Watch

    I can't remove all the apps of my watch. I have only developed this problem last month, after the watch for nearly a year. App on my iPhone that switch is dimmed in the watch. I can still add apps, but the key, but once done, I can't return it. I can

  • Running MatLab script

    Hi guys! I use TestStand to connect a bunch of data and save them as binary files. When the test is finished, I would like to start a matlab script. For the moment I do it manually, just open MatLab and change the path used by the script to find the

  • WSUS fails to import updates

    I'm having a problem with my WSUS machine that runs in Windows Server 2003, because it is unable to import import updates when I run the wsusutil.exe command. It keeps showing an error as follows: Import cannot import updates. Please see the log file

  • Vista 64 Ultimate Backup complete picture, a larger capacity drive restoration?

    Hi all, I want to know if the image of vista ultimate full backup can be used if the disk you save up to is greater than the image was taken from? Basically, I have two hard drives, a main 400gig drive and a 150gig raptor drive, they are all two old